Used Workshop Press for sale (30,870)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 10883, working width: 3,550 mm, stroke length: 250 mm, pressing force: 130 t, operating pressure: 310 bar, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Table width: 120 mm Column width: 3,050 mm Installation height: 510 mm Throat: 320 mm Stroke: 250 mm Working height: 900 mm Slide speed, empty down: 120 mm/s Slide speed, full press: 11.5 mm/s Slide speed reduced: preselectable Slide speed up: 100 mm/s Control & Axes Control: Cybelec DNC 80 Axes: Y1, Y2, X, R MACHINE DETAILS Machine weight: approx. 12,000 kg Space requirement: approx. 4,050 x 2,100 x 2,850 mm Operating pressure: 310 bar Oil capacity: 250 l EQUIPMENT - Die shifting with handwheel - 4 stop fingers Gujdjxf Au Espfx Aacoh - Hydraulic WILA punch clamp - Hydraulic AMADA die clamp - 2 support arms - Safe two-hand/foot operation - Various punches and dies

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Godpfx Ajxgt Tzeacouh Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: P-1843, actuation type: hydraulic, controller model: Siemens Sinamics G110, bending force (max.): 80 t, overall weight: 5,500 kg, TECHNICAL DETAILS Bending force: 80 t Lowering speed: 80 mm/s Guodpfx Aaexlthcocoh Safety distance: 1,500 mm MACHINE DETAILS Control: Siemens Sinamics G110 Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,150 x 2,700 mm Machine weight: 5,500 kg IP protection class: 54

Condition: excellent (used), Year of construction: 2015, Murata Muratec Wiedemann 'M2048TS' 200kN Punch Capacity Turret Sheet Metal Punch Press with Muratec CNC Control CNC Servo Motor Driven Ram; 1,250mm x 2,500mm Sheet Capacity (with no repositioning); Maximum Punch Thickness 6.35mm Mild Steel; Stroke Approx 160mm; 5.5kW Motor; 44 Number of Tool Stations x 4 Index; Steel Ball Table; Crash Sensor; Foot Switch Control; S/No. 14KX463570001. Modular Machine Guard Caging with Omron F3SJ Type Safety Light Curtain; Weight of Machine Approx 12,000 Kilos; Footprint Approx 3,800mm x 7,000mm; Plus Large Quantity of Tooling in (2) Steel Cabinets; Line Voltage 240V; Machine Voltage 415 Volt; Wiedemann Tooling. Gjdpfx Aaexnb Ivecsuh

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, BYSTRONIC XACT SMART 225/4100 PRESSBRAKE CAPACITY 4100 MM X 225 TON YEAR 2017 TOOLING Guodpfxowxykao Aaceh FULLY GUARDED CNC CONTROL THIS MACHINE HAS JUST BEEN PURCHASED AND DUE WITH US IN THE NEXT WEEK . WE HAVE 2 MACHINES AVAILABLE IDENTICAL .

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 000399, Heidelberg Printmaster PM52-5 Straight 5 colour NO PERFECTOR Pull lay control Autoplate Auto roller wash Alcolor dampening Baldwin refrigeration and recirculation Compact classic centre for ink and remote register control Gusdpfx Aoxmbu Toacoh Lateral register Weko powder spray Age: 2005 Still under power and available immediately Price: Euro 42,000

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Gujdpfx Aast Uc Iqocsh Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. Gedpfxexddw Es Aacsuh MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 34,327 h, This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine. Guedpfx Aaexnd Tbjceh Application Types Bending

Condition: used, Year of construction: 1988, Amada Promecam ITS 5020 CNC Pressbrake With Promecam CNC MB Control Maximum Tonnage 500 KN. Maximum Bending Length 2,000mm. Working Top Height 960mm. Intake 370mm. Maximum Stroke 105mm. Goose Neck 400mm. Sideplate Entry 1,690mm. Approx Speed 85mm/sec. S/No. ITS 050 20 107 (1988). With Assorted Tooling, Sick Safety Curtain & Foot Switches. Overall Dimensions W2,500 x D1,745 x H2,180mm. Weight 3,450kg. Gedpfx Aaoxnb Ehjcouh

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Very neat H Brake from Safan with new control system Gusdpfx Aaoxnqfdecsh

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm Guodsuad Nfopfx Aacsh MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request Gujdpfx Aaswmf Efocjh - Year: 2012 - Documentation available: No - CE marking present: Yes - Serial number: 7336127126 - Operating hours: 25000 - Distance between columns: 3600mm - Number of axes: 4 - Back gauge: 0 - Power: 175.0ton - Max. working width: 4050mm - Max. stroke: 255mm - Control type: DNC 880S - Motor power: 18.5kW - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS Godpfxow Td A Ij Aacsuh GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, functionality: fully functional, Year of construction: 1998, Used Baykal press brake Guodpfx Aexnqdmoacsh Type: APH 2604 X 60 Capacity: 2500 x 60 tons Electric backgauge Electric depth adjustment 1 set of tools Year of manufacture: 1998

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Gjdpjxgvwpjfx Aacouh Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used 2-meter hydraulic press brake from TAM Gjdsxnqc Ajpfx Aacsuh Model: HS 2050 30 Capacity: 2050 x 30 tons Adjustable back gauge 1 set of tools

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages Guedpfodx R Tfsx Aacsh - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: used, Used CNC press brake from Ermaksan Type: CNC AP 3100 120 Capacity: 3100 x 120 tons Delem DA66w graphical control CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Crowning system Euro tool clamping with 1 set of tools Year of manufacture: 2006 Gedpoxnp S Nefx Aaceuh

Condition: excellent (used), Year of construction: 2004, Korpuspresse Höfer Koptronik Year of manufacture: 2004 Technical data: Pressing length: max. 2500 mm Gedpjxgbxlefx Aacjuh Pressing height: max. 1350 mm Working depth: max. 600 mm Working height: Pressing time: adjustable Vertical and horizontal pressing beams are moved electromechanically and interlock with each other. Pressure is generated via frequency-controlled geared motors. Pressing pressure can be set separately for vertical and horizontal directions. Location: available immediately from site

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load- Godpfx Aajd Ecc Tscouh

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Gujdelht H Espfx Aacsh Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Gjdpfxeb Eln Do Aaceuh Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice Gujdpfxjw Sgnko Aacjh

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. Godpfxew Tdymj Aacjuh - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -