Used Wood Drying Chamber for sale (11,036)

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust Todpfevzuutox Akied 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. Todpfsvrvmxsx Akisd - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: used, Year of construction: 2020, Wood-Mizer MP360 – Four-sided planer/moulder • Condition: Lightly used • Four-sided planing: maximum width 350 mm; working height 10–50 mm as standard, up to 160 mm optional • Two-sided planing: width 410 mm; working height 10–230 mm Todpfs Af Ha Nox Akijd • Single-sided planing: maximum width 510 mm; maximum height 230 mm • Cutter motors: top 5.5 kW; bottom 4 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.75 kW • Total power: 16.25 kW • Cutter speed: 6,000 rpm at 50 Hz • Dimensions (L × W × H): 2,970 × 1,125 × 1,430 mm • Weight: 675 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Tedpfo Aavnfjx Akied Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: good (used), Year of construction: 2001, Digicolor dryer Year of manufacture: 2001 10,000 watts Tjdpfxo Ag Svvj Akisd With container, approx. 200 liters Model: DT 204 M

Condition: used, Technical specifications: Capacity: 3 m3 Integrated pump Shelf length: 3000 mm Tedpfx Akozabk Aeisd Shelf width: 1100 mm Dimensions: Height: 2700 mm Width: 2500 mm Length: 4700 mm

Condition: good (used), Year of construction: 2005, Drying machine, DIGICOLOR Year of manufacture: 2005 Tjdpj Ag Sygsfx Akijd Model: D 204 10100 W

Condition: good (used), Year of construction: 2001, number of chambers: 6, fuel type: gas, Miwe Ideal bakery ovens - used - year of manufacture: 2001, 2003 - 2 units available - area: 15 sqm - 6 chambers, 1.2 x 2.0 m - electronic control - hood with fan - gas burners - ovens from production - technically sound - ovens sold as complete units Tjdpfx Akjzcb Tvsisd - collection from warehouse/shipping option available - price on request

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Todpfxsym U Syo Akied Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Year of construction: 1996, condition: ready for operation (used), functionality: unexamined, operating temperature: 250 °C, heating capacity: 36 kW (48.95 HP), usable tank capacity: 4,500 l, machine/vehicle number: 603928, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 250 °C Usable volume: 4.5 m³ MACHINE DETAILS Tjdpsyxc I Ijfx Akied Type of heating: electric Dimensions (LxWxH): 200 x 150 x 150 cm Electrical Data Rated voltage: 400/230 V 50 Hz Connected load: 40 kVA Heating capacity: 36 kW Rated current/fuse: 58 A/63 A Protection class: IP 43 Exhaust air flow at 20°C with dampers open: 376 m³/h Exhaust air flow at 20°C with dampers closed: 133 m³/h

Condition: as good as new (ex-display), Year of construction: 2023, Wood-Mizer MP280 – Four-sided planer / moulder • Year of manufacture: 2023 • Condition: Showroom machine, exhibited at trade fairs and exhibitions • Four-sided planing: maximum width 250 mm; standard working height 10–50 mm, up to 100 mm optional • Two-sided planing: width 300 mm; working height 10–230 mm • Single-sided planing: maximum width 410 mm; maximum height 230 mm • Cutter motors: top 4 kW; bottom 3 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.37 kW • Cutter speed: 6,000 rpm at 50 Hz • Side spindle diameter: 30 mm; maximum cutter head diameter: 140 mm • Dust extraction outlets: 1 × Ø125 mm and 3 × Ø100 mm Todpfx Ao Af E Urskisd • Central control panel with individual motor operation Machine location: Romania.

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed Tjdpozhcrvsfx Akiod 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Tsdpfezagkzex Akied Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Todpfxoyr Dawe Akijd Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Tedpfx Ajym U Inskijd Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Tsdpfs Adl Hrsx Akijd

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw Tjds Af Hdhopfx Akiod • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm • Spindle speed: 4,400 rpm • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: Tjdjq Nfuzjpfx Akiod - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Todpfjpxnpaex Akiod Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: used, Mytron Type: WT 850 Mytron Drying Cabinet The WT 850 drying cabinet is used for the simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used universally. Todpfx Aozd R Tmjkiod The rolling cart allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with a regulating flap allows the cabinet to be connected to a central extraction system. Technical Data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, cart 50 kg Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fusing: 3 x 16 AT, 1 x 6 AT Control: Digital controller Safety device: adjustable over-temperature protection Through-hole: Exhaust nozzle 100 mm with regulating flap at the top Intake nozzle 100 mm with regulating flap at the top Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. Tsdpfx Aszwmypjkiod The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Tjdpfx Akezf N Nceijd Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Edwards Edwards iXH4545H – Industrial High-Vacuum/Dry Pump For sale is an Edwards iXH4545H, MK1 HV MM96 Black EMS version. This unit comes from a technical corporate environment and belongs to the high-performance iXH series from Edwards, which is used worldwide in industrial high-vacuum and coating processes. Device Data Manufacturer: Edwards Model: iXH4545H Tedpfozixyfjx Akiod Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Data (iXH series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas and configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typ. 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high-vacuum/dry pump from the 4500 series. It is typically used in: PVD / CVD coating Semiconductor industry Process chambers / vacuum furnaces Research & Development Applications with high gas load Chemical/corrosive process gas environment The iXH series is known for its high reliability, robust design, and 24/7 operability. Weight: approx. 890 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Todeyz Ia Ispfx Akied Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min Tedpfszqzy Rjx Akisd  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees