Used Wood Dryer Frequency for sale (12,211)

Condition: used, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 275/70 22,5, tire condition: 80 %, color: black, Year of construction: 2018, operating hours: 171,224 h, mileage: 171,224 km, front tire size: 275/70 22,5, rear tire size: 275/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69815 Doll, Tandem * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Duomatic air coupling * 15-pin electrical connector * Gross vehicle weight: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permitted gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 80%|80% -- 80%|80% – Tire size: 275/70 R22.5 * Tire condition, 2nd axle: 70%|70% -- 70%|70% – Tire size: 275/70 R22.5 * Tire sizes: 275/70 R22.5 * Manufacturer: BEFA Belziger Fahrzeugbau GmbH * Wabco Smartboard * 50 mm towing eye * High coupling * Short timber trailer, 4 bolster with ExTe stanchions * 3x spray protection * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to prior sale, changes, and errors. More photos and videos are available on our website. Our comprehensive services include: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing Fjdpfxoyz Ihfo Acwega * Handling of all (export) documents * Ordering export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing * TÜV inspection, registration service * Transfer of commercial vehicles Please contact our trained staff—we are happy to advise you.

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 Fgodpfx Asyy R D Tjcwoa The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V01D5/P02D2R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P2.2kW 0.1-320Hz Fgsdpfsyxmlwjx Acwja -Number: 2x inverters available -Price: per piece -Dimensions: 140/70/H155 mm -Weight: 0.9 kg/pc.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V02D2/P04D0R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P4.0kW 0.1-320Hz Fsdoyxmkyopfx Acwega -Number: 1x inverter available -Dimensions: 140/70/H155 mm -Weight: 0.9 kg

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : Fsdpfx Ajyvhi Eocwjga 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Fodpfxjyywf Re Acwjga Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: ready for operation (used), We are selling a high-end conveyor dryer from the premium segment, suitable for ambitious beginners and professionals, due to a company restructuring: Fgjdpfx Aoyzbbrjcwoa HIX Dryer Model 3616 - Sophisticated recirculation air system with two independently adjustable motors (more information on request) - Exhaust system at both the entry and exit of the dryer - 6 heating zones - Belt width: 91 cm - Temperature sensor located directly in the drying tunnel - Low energy consumption thanks to excellent insulation and 3-wall design - 380-400V, 18.5 kW power connection - Dimensions: 489 x 112 x 148 cm - Mounted on lockable castors NOTE: There is a German company specializing in these premium machines, so professional maintenance and spare parts supply are assured. THE MACHINE IS CURRENTLY OPERATIONAL AND CAN BE TESTED BY APPOINTMENT! Assistance with loading is available. The inlet and outlet sections can be disassembled for transport if necessary.

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Fgedpfx Aswavrcecwoa Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: used, Year of construction: 2020, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 380 V, input frequency: 50 Hz, For Sale: Format 4 Creator 950 – Vertical CNC Machining Center Due to the recent acquisition of Noordzee Interieur and the subsequent consolidation of our workshops, we currently have a duplicate CNC machine. That is why we are offering our Format 4 Creator 950 for sale. The machine needs to be cleared from our workshop in the short term. The Creator 950 is the renowned, compact vertical machining center from Format 4 (Felder Group). It is ideal for safe, efficient, and space-saving CNC drilling and milling. Simply insert the panel and the machine does the rest, without the need to set up large vacuum tables. Specifications & Details: - Brand & Model: Format 4 Creator 950 - Type: Vertical CNC Machining Center - Serial Number: 341.09.001.20 - Year of Manufacture: 2020 - Condition: Used, but in excellent and fully functional condition. Additional Information: An excellent opportunity for an interior fitter or woodworker looking for a reliable, space-saving CNC machine on short notice. Serious buyers are welcome to visit our workshop [in Middelkerke / or alternative location] for an inspection. Feel free to contact us for more information or to schedule an appointment! Asking Price: €53,620 Included per unit: - Second reference cylinder, on X-axis, positioned deeper in the machine for processing long workpieces - Machine support tables (front and rear) with air cushion system - Pick-up position * Only available on Advanced and Premium - 4-position linear tool changer, also suitable for aggregates * Not with tool length measurement * T001668 * Only on Advanced * On Premium free of charge instead of T001662 - UPS – Uninterruptible power supply for the machine PC, ensuring safe shutdown and data storage in case of power failure. Serial Number: 341.09.001.20 – 341.09.001.20 Fgodoyv Eu Eopfx Acwja The Format-4 Creator 950 (Advanced, 2020) comes standard with a 9.0 kW spindle motor. Total electrical connection: 13 kW.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. Fodpfx Aceyw Ndmswega ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw Fgsdsyvrd Tjpfx Acwea -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available Fgjdpfocaq Dlox Acwoa -Dimensions: 300/270/H110 mm -Weight: 4.2kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Fgsdpfx Aocaq Dzocwea -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Dimensions: 300/230/H110 mm -Weight: 3.6 kg

Year of construction: 1993, condition: used, machine/vehicle number: 0356-12T-037-345, Cooling air volume: 250 m³/h Heat output: 965 W Compressed air inlet temperature: + 35°. Compressed air outlet temperature: + 27°. Volume flow: 75 m³/h Operating pressure: 7 bar max. operating overpressure: 15 bar Compressed air connection: R 3/4 Condensate separator, capacity: 0.5 l condensate quantity at nominal load: 316 g/h electrical connection: 220 V weight: 105 kg Fedjdnzp Iopfx Acwjga Space requirement: 870 x 560 x 620 mm

Year of construction: 2007, condition: good (used), max. compressed air: 13 bar capacity: 390 m³/h max. inside temperature: 55°C max. outside temperature: 43°C Fjdpfx Acjd E S H Ejwsga electr. drive: 220 V, 1,64 kW weight: 80 kg space requirement: 600 x 600 x 1000 mm

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Fgedpfoyh Hn Hox Acwja Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0020-5E3-4-XXX -Power: 0.55 kW Fgjdpfx Aexnw Tzjcwoa -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz -Control head: Type: MDX91A-0020-5E3-4-T01/CFN21A -Number: 8x inverters available -Price: per piece -Dimensions: 360/100/H215 mm -Weight: 4.2 kg/pc.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0032-5E3-4-XXX -Power: 1.1 kW -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz Fgedjxxitbspfx Acwja -Control head: Type MDX91A-0032-5E3-4-T00/CFN21A -Number: 4x frequency converters available Price: per piece -Dimensions: 360/100/H215 mm -Weight: 4.2 kg/pc.

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Fodpfx Aceyznahewjga

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Click on the link below to see a video of the machine running. Fodpfx Acoygvmrjwoga

Year of construction: 2026, condition: new, Steel heating and/or hay drying, as well as hay drying installations and drying cabins, installation in containers plug and play (ready for immediate use, also for rental), integration into container(s) or on-site in Switzerland, Austria, or Southern Germany. Power from 80kW up to 500kW, and on request >500kW. Warm air heaters in stock, both new and used! Pellet heater 200kW 19,000 m3/h – ask for our competitive prices! * Used!!! In stock: 1×200kW in container with 3-ton buffer tank * New!!! In stock: 2×200kW with pellet burner. Lanox.eu The Netherlands Fedpfx Askytn Hecwsga

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm Fjdpfeyuvp Asx Acwsga -Weight: 14 kg/pc.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg Fodpfx Aeyuut Hscwoga

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Fodpfxsxr N U Eo Acwjga Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm saw blade rotations: 6300 rpm Fjdpfxsb H Infs Acwoga electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm