Used Wood Chip Crusher for sale (20,439)

Condition: excellent (used), Catalogue number: 7741 TECHNICAL DATA Inlet width: 400 mm Inlet height: 210 mm Shaft width: 430 mm Shaft diameter: 390 mm Knife length: 430 mm Number of knives: 2 pcs Screen size: 38x24 mm / 27x27 mm Bottom toothed feed roller Lower roller motor: 0.75 kW Upper toothed feed roller Upper roller motor: 0.75 kW Belt feeder Feeder belt length: 1950 mm Feeder belt width: 400 mm Discharge conveyor with adjustable height: 3 kW Conveyor dimensions: 6100x550 mm Total discharge conveyor dimensions: 6550x1850 mm Main motor: 30 kW Auto-reverse (adjustable) Overall dimensions (L/W/H): 3750x1720x1750 mm Weight approx.: 3500 kg – German made – Auto-reverse – Belt feeder – Discharge conveyor with adjustable height (mobile) – Used shredder, in very good condition Net price: 86,900 PLN Net price: 20,690 EUR at an exchange rate of 4.2 EUR Ijdpfsxcx R Dex Ag Ueal (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Iodpfow Eu Aqsx Ag Ujal Unladen weight: 26,700 kg Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Iasdpfxjr R Ewle Ag Ujl Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times Iasdpfx Agjv Sqrpj Ujl - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection Iaodpfx Agewhw Ius Uel in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Condition: reconditioned (used), functionality: fully functional, power: 13 kW (17.68 HP), We offer this refurbished wood and material shredder for sale. Output capacity up to 250 kg/h (depending on material and screen size) Main motor power: 13 kW Number of knives: approx. 24 pcs. They can be rotated 6 times as the cutting edge wears. Spare knives and machine servicing available Professional shredding of various types of waste material Suitable for medium-sized operations Iedpfx Agowbgxcj Ueal Intended for shredding wood, pallets, plastics, paper, cardboard, leather, rubber, etc. Milling head with interchangeable knives ensures smooth and safe operation Fineness of shredded material adjustable via screen diameter Material feeding to the milling head via hydraulic ram situated on the machine’s rear wall Material extraction at the discharge Large top feed opening Suitable for use with industrial loaders Technical specifications: Output capacity up to approx. 250 kg/h (depending on material and screen size) Main motor power: 13 kW Rotor feed opening: 600 x 800 mm Rotor width: 600 mm The machine is refurbished and ready for operation.

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Iodpfx Agov Ublfs Usal Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: like new (used), Year of construction: 2020, operating hours: 622 h, functionality: fully functional, Wood chipper Forst ST6D year of manufacture 2020 operating hours 622 Iajdpfxjw R U Ngo Ag Uol maximum diameter 16 cm in perfect condition

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw Ijdpfx Aou Rl Sfjg Uoal frequency-controlled for variable speed without vibrating chute

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Iedpfxsd Dgw Ue Ag Ujal Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Weima WL4 shredder, year: 2022, in excellent condition Iasdoxyxchspfx Ag Ujl

Condition: ready for operation (used), Technical characteristics shaft length Ø 500 mm 4 knives Rotation du rotor1500 tr/mn Type de recyclageShredder Power and Motors Voltage: 380 V Pluging: Three-phased Power: 30 Kw Overall dimensions Isdpotxk S Hefx Ag Ujal

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Isdpexqmrrjfx Ag Uoal Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed Iederblwdopfx Ag Usal - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed Ijdpou Rl Ruefx Ag Ujal max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Iasdew Rpygjpfx Ag Usl Motor: 1.1 kW

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Iajdewiuywepfx Ag Ujl Electrical panel Ready for operation Year of manufacture: 2000

Condition: good (used), Year of construction: 2006, functionality: fully functional, Heinola chipper TT-75 RS year 2006 Isdsxrcgzspfx Ag Ujal infeeding with vibra conveyor 6 m long 600 mm width + 1 year old magnetic.

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm Iaedpfsignt Uex Ag Usl - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm Iasdpfx Ajrblx Hjg Uel - HP tractor: 40 - 100 HP

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional Iodsff Hgbjpfx Ag Ujal

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) Iedsvu A Rpopfx Ag Ueal (Prices may change with significant fluctuations)

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Hydraulic feed Weight of 730 kg Price + VAT. Delivery available throughout Europe. Ijdpfxemfnz Eo Ag Uoal -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Iaedpfjd Dzahsx Ag Ujl Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection Iodoff Hf Depfx Ag Uoal * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional