Used Wood Chip Blower for sale (11,857)

Condition: excellent (used), Catalog number 7259 Prjdpozrug Tjfx Akiec TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, Psdpfx Ajgw Sxzskijrc waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Predpfxohbdg Uj Akioc • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Psdpfxjpxnpas Akijrc Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries • Air transport systems Technical data Psdez Slrgepfx Akisrc • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox Prsdjh Hnp Dspfx Akijc - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - inlet of the loading hopper: 870x735mm - working width of the rotor: 720mm - main motor: 18.5kW - pump motor: approximately 0.75kW - number of blades: 17 pcs - blade dimensions: 80x40mm - screen size: 20mm - pressure plate/feed hopper - electric automatic reversing - outlet for shredded wood: diameter 250mm Prodpfx Akozru Uqsiec - dimensions (length/width/height): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressure plate/feed hopper – very good condition – used wood chipper Net price: 33,900 PLN Net price: 7,884 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 8068 Technical data: - inlet opening of the shredder: 410mm x 180mm Prjdpfjzukyhjx Akiec - shaft width: 430mm - shaft diameter: 430mm - number of knives: 2 pcs - screen dimensions: 50/50mm, 50/130mm - top driving shaft, toothed - bottom 2 driving shafts, toothed - length of the feed belt: 3750mm - width of the feed belt: 380mm - auto-reverse (adjustable) - main engine: 22kW - feed engine: 2 x 1.5kW - machine dimensions (length/width/height): 5900x1500x870mm - weight: approximately 2000kg Advantages: - Polish production - auto-reverse (adjustable) - with conveyor belt - DTR documentation - used shredder, very good condition Net price: 64900 PLN Net price: 15093 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Hydraulic feed Weight of 730 kg Price + VAT. Delivery available throughout Europe. Prjdpjmfnz Eofx Akiec -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Prjdpjh Eiw Isfx Akiec Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: excellent (used), Catalog number: 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Screen: 20mm - Pressure plate - Electric auto-reversing - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approximately 2500kg ADVANTAGES - German-made - Auto-reversing - Pressure plate - Very good condition - Used wood chipper Net price: 85,900 PLN Net price: 19,977 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations) Pjdpfozxhfcjx Akisrc

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - blade length 530mm - number of blades 2 pcs - screen dimensions 65x65mm - toothed pulling shaft, bottom - lower shaft motor 2.2kW - toothed pulling shaft, top - upper shaft motor 2.2kW - belt conveyor - length of conveyor belt 2200mm - width of conveyor belt 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approximately 3000kg Prjdpfozx Rnmjx Akijc ADVANTAGES - German-made - auto-reverse (adjustable) - DTR documentation - used shredder, very good condition Net price: 75900 PLN Net price: 17650 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Pjdpfxey Ifm Es Akiorc

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me. Predpfxoyz Ia Ij Akisc

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and has low maintenance costs. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Sieve basket with replaceable sieve Foreign object detection/overload protection Automatic shutdown Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Rotor width: 915 mm Rotor diameter: 325 mm Cutting blades: 40 pcs (30 x 30 mm, hollow ground) Counter blade: 1 Sieve size: 7 - 40 mm (round or square, other sieve sizes upon request) Psdpeza Erksfx Akisrc Infeed hopper in standard size 920 x 1220 mm Extraction connection 200 x 200mm Dimensions L x W x H: approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: additional row of cutting blades on the rotor second counter blade cutting blades, sieve, counter blade made of special steel hopper dimensions according to customer requirements hopper with pneumatically opening lid Note regarding used machines: • Errors and omissions in technical data and subject to prior sale. • Prices quoted are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - roller width 450mm - roller diameter 550mm - number of knives 2 pcs - pulling roller, toothed on top and bottom 2 × 2.2kW - additionally, a toothed pulling roller at the bottom, in front of the pulling roller - electric auto-reverse (with adjustable setting) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor length/width/height 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 17884 EUR, depending on the exchange rate of 4.30 EUR Pjdpozx S Dcefx Akierc (Prices may change due to significant exchange rate fluctuations)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives Prsdpfx Akju R Sxxjijc - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,200 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, Container Mini Wood | New & Available | Office, Garden, Construction Villex Mini Wood Pavilion 1.0 as an office container / garden container / construction container HIGHLIGHTS & DATA AT A GLANCE Condition: New & fully assembled External dimensions: 4.00 m x 2.40 m x 2.60 m (L x W x H) Area: 9.60 m² Insulation / Wall thickness: 50 mm sandwich panels (exterior walls) EQUIPMENT Door: 1x glass entrance door 2000x1000mm Windows: 2x WC windows 500x500mm Electrical installation (surface-mounted PVC): 7x sockets Complete fuse system incl. RCD / fuse box Ready for immediate connection DELIVERY & PAYMENT Delivery: Possible throughout Germany Delivery time for in-stock items: Approx. 1-2 weeks after order receipt Delivery time for custom builds: Only approx. 3–4 weeks PAYMENT METHODS Convenient advance payment via PayPal Prsdpozxpqysfx Akiec Bank transfer INTERESTED OR HAVE QUESTIONS? Contact us today! We will be happy to provide you with non-binding advice on your project and create a suitable offer. - Are you looking for a flexible, high-quality and immediately ready-to-use space solution? Our Villex Premium Containers are in stock, fully assembled and immediately available! Ideal as office containers, construction containers, living containers, sanitary containers, school or kindergarten containers.

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW Pjdjxa Eu Repfx Akiorc - The silo was subsequently equipped with a particulate separator (cyclone)

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 Pedpfxjxa Evbj Akijrc - Fuel feeding: automatic, with screw conveyor

Condition: excellent (used), Automatic lathe Locatelli Ariete 3 Prjdpfxexhbyxo Akiec Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: good (used), Year of construction: 2001, Manufacturer Mayfran Type D 60 Pedpfx Asvu R Ddskiorc Type chip conveyor Condition used Dimensions Length 3500 mm Width 620 mm Height 1550 mm Height 350 mm

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Prsdpjz H Tvasfx Akioc Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: ready for operation (used), Ringler RA 320-D 2x3.0 Vacuum Chip Extractor 6.0 kW Weight: 348 kg 2895 rpm You are welcome to visit us for an inspection. Prjdpfx Akozyqz Aeisc We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, functionality: fully functional, KLOCKNER 120x500 K-2WV Shredder/Chipper Inlet width: 520mm Inlet height: 180mm Shaft width: 520mm Shaft diameter: 400mm Number of knives: 2 pcs Screen dimensions: 100x100mm Bottom drive shaft with gear, shaft motor 2.2kW Top drive shaft with gear, shaft motor 2.2kW Feeder length: 4400mm Feeder belt width: 500mm Pedez E U I Iepfx Akisrc Feeder motor power: 1.4kW Main motor: 55kW