Used Wmw Dlz 355 for sale (461)

Condition: used, Technical details: weight max.: 7,0 t Knedpfx Aasu Nvm Rj Esf Dimensions (LxWxH): 3,4 x 0,12 x 0,51 m The lifting beam is sold without crane hooks. Type: T-beam, welded sheet steel Lifting eye Ø 80 x 130mm Load-bearing eyelets Ø 45 x 3050mm (center stand) As stated without UVV. (Accident Prevention Rules) *

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm Kjdpeu N Ay Rjfx Aa Esnf No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm Knsdpsu N Dg Sefx Aa Esf *

Condition: used, Technical details: floor-plate length: 4750 mm Kedpfx Aasu N Dq Re Eenf plate width: 1850 mm plate height: 200 mm weight of the machine ca.: 4785 kg steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm *

Condition: used, Technical details: Length: 600 mm width: 300 mm dimensions L x W x H: siehe Beschreibung m Spotting measuring plates No. 3 size 200 x 200mm with small quadrants No. 4 size 200 x 200mm Knodju N Dxzspfx Aa Eef No. 5: size 580 x 285mm No. 6: size 300 x 300mm No. 7: size 160 x 160mm No. 8: size 600 x 250mm No. 10: size 400 x 280mm No. 11: size 400 x 255mm with 24 kg *

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing Ksdeu N D Dwepfx Aa Eenf T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 205 mm plate width: 195 mm Plate thickness: 65 mm Knodeu N D H Ejpfx Aa Esf 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm *

Condition: used, Technical details: width: 655 mm Knodpfx Asu N D Snsa Esf depth: 500 mm height: 500 mm weight of the machine ca.: 197 kg dimension L-W-H: 420 x 655 x 500 mm model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with long holes *

Condition: used, Technical details: width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Knedpfxju N Eatj Aa Ejf Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Knsdpfx Aeu N E Aboa Eef *

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 depth: 225 mm height: 300 mm Knsdpfxowb D H Do Aa Ejf dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished *

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Ksdsval Nrspfx Aa Eenf Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed Kedou Ic Ewepfx Aa Ejnf equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min Knodsvbh N Ropfx Aa Esf return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm Knsdpfju S Hywjx Aa Esf *

Condition: used, Technical details: diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Knsdpfx Ajvgbhqea Ejf Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *

Condition: used, Technical details: x-travel: 1000 mm Ksdpfxev Sz Dis Aa Ejnf y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Technical details: bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Kodpfx Asvgbdxoa Esnf Spindle run right. Small vice included *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm * Kedpfx Aaeu N Ddwe Eonf

Condition: used, Technical details: floor-plate length: 7040 mm plate width: 2230 mm plate height: 330 mm weight of the machine ca.: 12800 / Stück kg 2 pieces of cast steel plates for sale free. Surface finished T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm Kedpfsu N Dl Iox Aa Eenf The plates are equipped for side mounting/clamping connection. Through holes 11 pieces Ø 28mm continuous with counterbore Ø 600mm x 260mm and 12 pieces Ø 28mm continuous with counterbore Ø 114 x 270mm. Our price per plate. *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) Knsdpfeu N Dz Aox Aa Ejf -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Knjdou N D Hrspfx Aa Eef *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Kodpfeu N D Icox Aa Ejnf Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: width: 1270 mm depth: 1000 mm height: 1600 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm Ksdpfx Aasu N Ea Hs Esnf *

Condition: used, Technical details: width: 200 mm Ksdpfx Aeu N Ec Uea Eenf depth: 300 mm height: 500 mm weight of the machine ca.: 38 pro Winkel kg 2 pieces available ( price per piece) *