Used Wire Straightening Machine for sale (85,401)

Year of construction: 2007, condition: ready for operation (used), This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. Application Types Gkedpjx D Iplsfx Aayef EDM

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Gedpfx Aasxyhhaoyjkf Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, machine/vehicle number: 57CR2093, x-axis: 600 mm y-axis: 400 mm z-axis: 310 mm Max. workpiece weight: 1500 kg min. part length: 1050 mm maximum workpiece width: 800 mm max. workpiece height: 295 mm Gkjdpfx Aaox Ed H Nsyjf Weight of machine approx.: 3500 kg Standard configuration Max. workpiece dimensions 1050 x 800 x 295 mmWork table dimensions 840 x 640 mm (square table)Rapid traverse rate of the work table 1300 mm/minElectrode wire diameter 0.1 to 0.3 mmMax. wire feed speed 23 m/minElectrode wire tension 0.5 to 25 NTaper unit Opto - linearAxis travel +/- 75 x +/- 75 mmMax. taper angle 15° (with 260 mm workpiece thickness)External dimensions 2687 x 3030 x 2150 mm Extended machine accessories including cooler

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees Godox Aix Ejpfx Aayskf 0.1-0.3 mm wire can be used (0.25 mm installed) chiller wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories machine is under power for inspection.

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port Gjdjvt Ec Sepfx Aayskf - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: ready for operation (used), Year of construction: 2000, operating hours: 4,835 h, functionality: fully functional, machine/vehicle number: Ser. Nr. 111162, workpiece weight (max.): 100 kg, travel distance X-axis: 410 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 350 mm, workpiece length (max.): 580 mm, overall weight: 1,350 kg, input voltage: 380 V, Equipment: documentation/manual, This 5-axis wire EDM machine Brother HS-50A was built in November 1999 and has been in operation since 2000. The low operating hours of only 4,835 h are due to the fact that the machine has only ever run in single-shift operation. 90% of its use has been for eroding holes in 12 mm cutting plates. The machine has undergone all scheduled servicing and, apart from regular wear parts, has never required any major repairs. The machine will remain in use until week 51/2025 and can be inspected on site by arrangement. Videos of the machine in operation are available upon request. Gkodpfjx E R Hfex Aaysf

Year of construction: 2014, operating hours: 16,500 h, condition: ready for operation (used), Main Drive Number of axis 5 Gsdpfxjx D E Edo Aayskf Movement X-Axis Movement 400 mm Z-Axis Movement 230 mm Y-Axis Movement 300 mm This 5-axis Sodick SL400Q wire EDM machine was manufactured in 2014, featuring a 400 x 300 x 230mm work envelope and U/V axes of 90mm each. If you are looking to get high quality EDM capabilities consider the Sodick SL400Q machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm Gsdpfxswc U Izj Aayekf coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: Godpfsvf Hhyox Aayjkf You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm Godpfx Aaox Dit Sjyskf U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg Gjdexx Uatspfx Aayjkf

Condition: excellent (used), Year of construction: 1985, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm wire feeding speed: 29 - 90 mtr./min Gksdpfxomt A Svj Aayof

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 3000 kg Main Drive Number of axis 3 Workpiece Workpiece X 350 mm Workpiece Y 250 mm Workpiece Z 220 mm This 3-axis AGIE Charmilles CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE Charmilles CUT 20 machine we have for sale. Contact us for more information. Application Types EDM Godjx D E Aiepfx Aayokf

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm Gjdevuk Shspfx Aayekf no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe Gedpfx Aox Ea E Isayekf

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Gjdowt N Uqspfx Aayskf

Year of construction: 2015, operating hours: 3,600 h, condition: ready for operation (used), General Data Machine weight 3400 kg Measurements height 2070 mm Measurements depth 1915 mm Main Drive Number of axis 3 Gkjdpfx Ajx D Enxeayof This 3-axis SEIBU M50AG wire EDM machine was manufactured in 2015. It supports workpiece dimensions up to 800x650x300 mm and a maximum weight of 800 kg. Features include a rapid traversing speed of 1200 mm/min and a fine increment capability of 0.0001 mm for precise machining. If you are looking to get high-quality EDM capabilities, consider the SEIBU M50AG machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 Godpfx Aevuugioayjkf straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1961, functionality: fully functional, machine/vehicle number: D08L/7656, Offer Number: D08L/7656 Machinetype: straightening and cutting machine Info: double wire processing Make: BÜNDGENS Type: UD2 Gjdpfx Aaswi S H Ieyokf Constr. year: 1961 diameter range: 0,8-2 mm cutting length: 1000 mm speed - meters/min: 80 Location: In our warehouse

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 2600 Measurements depth 2150 mm Measurements height 2250 mm Machine weight 3200 kg Main Drive Number of axis 5 Movement X-Axis Movement 400 mm Y-Axis Movement 300 mm Z-Axis Movement 270 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Gksdpfx Aaex D Dudsysf Workpiece Workpiece X 800 mm Workpiece Y 560 mm Workpiece Z 245 mm Workpiece weight 800 kg This 5-axis AccuteX AP 4030A wire EDM machine was manufactured in 2022, featuring a submerged design for enhanced precision and stability. It supports a maximum workpiece size of 800 x 560 x 245 mm and a weight up to 800 kg. Key features include AWT for reliable wire threading and a high-resolution 17” LCD-TFT screen for advanced control. Ideal for complex, high-accuracy tasks. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t Gsdovuk H Sopfx Aayskf material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm no. of straightening rolls 5 straightening roll diameter 70 mm number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m with infinitely variable drive, pneumatic snubber roll, pneumatic intermittent lifting, coil loop control material thickness 2,0 mm at material width 180 mm Material thickness 6,0 mm at material width 40 mm as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D08L/8302, Offer Number: D08L/8302 Machinetype: straightening and cutting machine Make: BÜNDGENS Godpfx Aaswi Tfroyskf Type: UDW0 Constr. year: 2001 diameter range: 0,2-1,3 mm speed - meters/min: 15 Location: In our warehouse

Year of construction: 2002, condition: ready for operation (used), Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Application Types Gkedjx D D Taepfx Aayjf EDM

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Gedpfxevut Dto Aayekf

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light Gedpfx Aasx D Iifeyskf This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM