Used Wire Rope for sale (3,421)

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Dcsdpfox Ea E Iex Adhsn Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel paths: X= 800 mm, Y= 550 mm, Z= 525 mm Travel paths: U= 800 mm V=550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Dcodpswvqwrsfx Adhjn Submerged-type machine with automatic wire threading and re-threading after wire breakage With automatic front door Includes AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and overhauled upon receipt of your order. You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Dcjdpfoxnykpjx Adhon Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Dcjdov Dkvropfx Adhjn Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D12L/8254, Offer Number: D12L/8254 Machinetype: wire nail press Make: WAFIOS Dcsdpfxewi Tgcs Adhjn Type: S200 Constr. year: 1975 diameter range: 3,8-6 mm nail length: 25-200 mm output - pieces/min: 200 Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: D12L/8212, Offer Number: D12L/8212 Machinetype: wire nail press Make: WAFIOS Type: N6 Constr. year: 1974 Dsdpfewi Tikex Adhscn diameter range: 3,1 - 5,2 mm nail length: 13 - 150 mm output - pieces/min: 370 Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 220 mm Dodpfxjzlnrce Adhjcn Travel range, Z-axis: 220 mm Maximum workpiece dimensions: 1,000 × 550 × 220 mm Maximum workpiece weight: 750 kg Maximum taper: ±45° / 220 mm Standard taper: 30° Wire diameter: 0.1–0.3 mm Cutting speed: 300 mm²/min MACHINE DETAILS CNC control: PC-based multi-processor control Accuracy and surface finish Surface roughness Ra: min. 0.22 µm Measuring resolution: 0.05 µm EQUIPMENT Windows XP Touchscreen

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12U/8492, Offer Number: D12U/8492 Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1994 wire diameter: 3,1-5,2 mm Dcsdezd U Rijpfx Adhjn nail length: 13-150 mm capacity - pieces/min: 370 Location: Outside of Europe

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: W150474, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 420 mm, workpiece height (max.): 420 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, documentation/manual, The Makino U6 H.E.A.T. is a high-precision wire EDM machine for machining tool steel, hard metal, titanium, Inconel, and other difficult-to-machine materials. It is specifically designed for tool and die making, aerospace, medical technology, and precision manufacturing. Key technical specifications: Travel ranges (X/Y/Z): 650 × 450 × 420 mm U/V axes: ±75 mm Max. workpiece size: 1,000 × 800 × 400 mm Max. workpiece weight: 1,500 kg Available wire diameters: 0.10 / 0.15 / 0.20 / 0.25 / 0.30 mm Work table: 910 × 710 mm (hardened, usable on four sides) Dcjdpszq Tc Djfx Adhjn Special features of the H.E.A.T. version: *H.E.A.T. (High Energy Applied Technology) for significantly higher cutting speeds under difficult flushing conditions. *Two independent high-performance flushing pumps for higher pressure and better removal of erosion particles. *Four-stage filter system with air vent for easier filter replacement. *Split-V wire guide, which is much more durable than conventional round wire guides and requires less maintenance. *Hyper-i control with 24" touchscreen, mouse, and keyboard, as well as integrated manuals and training videos.

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM100 Constr. year: 1993 Dcodoyya Nxepfx Adhon wire diameter range: 10 mm width of band: 100 mm feeding length: 250 mm Location: Europe

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: D12E/8453, Offer Number: D12E/8453 Machinetype: wire nail press Make: WAFIOS Type: N80 Constr. year: 1997 diameter range: 2,1-3,1mm nail length: 32-51mm Dcedpfx Adeyya Rcshen output - pieces/min: 1600 Location: Europe

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Dcedpfx Adozhlvkehsn Total weight of the system: 6300 kg The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Dcedpfxszgt N As Adhen Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Dcsdpfxoy Rxtke Adhen Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: used, TECHNICAL DETAILS TRAVELS Dedpfx Adjy Tzc Tshjcn - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, für Draht Dcedpfxsh Tafxs Adhen hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, The clamping devices from Becker Erodiertechnik are suitable for both the initial equipment of your erosion machine or for upgrading existing equipment. Round parts, small pins, or molds can be clamped quickly and precisely, just like larger plates. Dedpfjlk Hvrjx Adhecn We manufacture everything, from the fixed holder with a vise or clamping beam including a pivoting function, at our Karlsbad location. Adaptations to other interfaces or systems are possible. We manufacture our products from stainless steel and harden them. We are happy to assist you with any questions or technical support.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer Dedpjvvl Uaefx Adhjcn 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Machine weight: 8 tons. Location: In our workshop. Dodpfxjzy Et Ts Adhocn

Condition: new, Year of construction: 2026, The brass wire brush roller for the CORMAK MM3156C grinder is a durable and effective tool designed for cleaning and surface treatment of metal components. Made of high-quality brass wire, it ensures precise and safe operation. Thanks to the use of brass wire, the brush is safer for more delicate components than conventional steel wire brushes. It is ideal for restoring parts, preparing surfaces for further processing, and lightly finishing components. Easy installation and solid construction provide comfortable and precise operation in all workshop conditions. Applications: removing rust, paint, and deposits from metal surfaces, cleaning welds and edges, preparing surfaces before painting or soldering, polishing metal components, Dedpfx Aszzw Thodhecn gentle treatment of soft metals and alloys where a steel wire brush could damage the surface.

Condition: used, High-precision Takatori MWS-610 Multi Wire Saw for Semiconductor & Crystal SlicingFor sale is a professional, high-performance Japanese multi-wire saw Takatori MWS-610, specifically designed for ultra-thin, high-precision slicing of hard and brittle materials.Key Applications & Materials:Semiconductor industry: Silicon (Si), Silicon Carbide (SiC), Gallium Nitride (GaN) wafer production. Djdpfszz Hk Aex Adhscn

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dedpon Apntsfx Adhecn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dsdpfx Adjxni T Hjhecn Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! Dcodpfx Adoxqn Ibohsn TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Dodpfxey R Dtcj Adhocn