Used Wire Feeder for sale (5,232)

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, The machine comes from a toolmaking workshop and has always been treated with great care. It was in use until recently and was subsequently stored. The machine's functionality has been checked and tested. It is fully operational and can be inspected on-site and tested while powered and under load at any time by appointment. Bedo Agxglopfx Afmsww

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast: 3F Bwjdszuufhepfx Afmsw Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Initial inspection: Yes Cabin width: 1300 mm Year: 2020 Hours: 3869 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - PSA - Blue spot - Adjustable forks! - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Used IEMCA BOSS 552 HD 32LL Bar Feeder Bwodoz Smf Iopfx Afmow Year: 2014 In very good condition

Condition: used, all stainless steel nett width 450 mm Bsde Ahn T Aopfx Afmoww Motor Type MS 6 - 25 HZ 380 - 440 V GN 128,50 kg dimensions : ± 2.060 x 750 x 600 mm Opening for filter or sieve No base/frame

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Bwedpfx Ajzrh N Usfmjw Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Initial inspection: Yes Cabin width: 1300 mm Year: 2020 Hours: 4883 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL Bjdpfxszuufbj Afmeww - SAFETY doors with TILTING function!! - PSA - Blue spot - Adjustable forks - Induction / Wire Guidance

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Charmilles P25 Year of manufacture: 1983 Bwjdpfxez Nhwrs Afmsw

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter: 5 - 80 mm Bwodpez Eqwxefx Afmew -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions.

Condition: used, all stainless steel Bjdpfs Ahg Tqjx Afmjww nett width 430 mm motor type JVM MS 6-50 Hz 380-440 V / 9,5 A/ 50 Hz Grill opening: dia. 8 mm dimensions (L x W x H) : ± 2.600 x 750 x 700 mm

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz Bwsdpfxow Rvu Dj Afmow

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Bsdpfxj Agggyj Afmjww Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: good (used), Year of construction: 1999, functionality: fully functional, FOR SALE: FANUC ROBOCUT α-1iA Wire EDM Machine Specifications and technical capabilities (Manufacturer’s plate): • Model: ROBOCUT α-1iA (Type A04B-0312-B002/E5) • Year of manufacture: October 1999 (Serial number: P99X11330) • Numerical Control: FANUC Series 18i-W • Axis travels (Stroke): X = 520 mm | Y = 370 mm | Z = 410 mm • Taper axes: U = 120 mm | V = 120 mm • Maximum workpiece weight: 1,000 kg (1 tonne) • Power supply: 200/220V (Three-phase, 50/60 Hz) – Required power: 13 kVA • Machine weight: 2,700 kg (2.7 tonnes) Included equipment: • Original control panel with remote screen and keyboard • Work tank with full protective enclosure Bwsdpfs Af Auvox Afmsw • Automatic wire threading system (roller guide system) • Remote manual control unit Condition: • Used machine, fully operational, sold as is.

Condition: used, Year of construction: 2013, operating hours: 11,801 h, functionality: fully functional, total length: 4,500 mm, total width: 1,530 mm, total height: 1,100 mm, overall weight: 1,500 kg, We are offering this used Breuning IRCO SIMAC 50.1 bar feeder, manufactured in 2013. We have a bar loader available: Breuning SIMAG 50.1. It was previously connected to a TWIN 42 machine. Here are some details: Bwsdpfxoztqq Rj Afmjw Year of manufacture: 12/2013 Operating hours: 11,801.5 hours Accessories: Collets 14, 17, 32, 38, 46 If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 Bjdpfxjzv H N Is Afmoww ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. Bsdoz Uwf Aepfx Afmeww We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell Bjdpfe Abal Rox Afmeww • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! Bwedpfx Afozv H Nzomew - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm Bwsdpfx Afjz R Rpbsmew • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) Bwodpfx Aszv H N Usfmsw - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar. Bedezx D Umspfx Afmoww

Year of construction: 2017, condition: excellent (used), Year of manufacture: 2017 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Serial number: 22171258 Weight: 980 kg Bwedpfx Afo Agvl Njmow Filtration unit: included Conveyor belt: right Chip conveyor: included Tools: not included

Year of construction: 2017, condition: excellent (used), Number of axes: 8 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Year of manufacture: 2017 Serial number: 22171425 Equipment: chip conveyor, chip transporter, filter, cooling unit Oil cooler: HABOR Bedpfx Afs Agvlzsmsww Tools: not included

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Machinetype: wire and strip bending machine Bodpoyya Nxsfx Afmeww Make: BIHLER Type: GRM100 Constr. year: 1993 wire diameter range: 10 mm width of band: 100 mm feeding length: 250 mm Location: Europe

Condition: good (used), Ktron Soder Screw feeder Bsdpfx Ajz Ak Sgofmoww Stainless screw feeder, batch feeder, 150Kg stainless hopper, twin screws, 35mm screw diameter, 3Ph

Year of construction: 2018, condition: excellent (used), Manufacturer: WIVIA Model: W428 Bodpfxs Agvlps Afmoww Year of manufacture: 01/2018 Serial number: 01163 Number of axes: 8 Maximum turning diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Conveyor belt: Yes Chip conveyor: Yes Filtration system: Yes Cooling unit: Yes Oil cooler: HABOR Tools: None