Used Windows Production for sale (27,446)

Condition: excellent (used), Year of construction: 2000, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 101758, type of input current: three-phase, Complete line of stations: sheet feeder; 2 creasing machines, also suitable for hot creasing; back drilling machine for finger ring; wire ring applicator; riveting machine for lever arch mechanism installation with large-capacity magazine for high volumes; multi-color hot stamping; turner; mechanism lever opening; vibrating system for collecting and positioning compressor bar; compressor bar insertion; compressor bar closing; insertion of corrugated cardboard protective sheet; mechanism lever closing; folding and forming of lever arch file; collection roller conveyor. Plant fully modernized with new hardware and control software in 2020. Operational plant, can be viewed on site. Total length approx. 16 m. Ibodpfx Aaexfvd Tecsc

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 68679, Horauf Universal automatic casemaker, year 2001. Only 9,614,945 copies produced. Year: 2001. Number of copies: 9,614,945. Maximum panel/cover size: 720 mm (width) × 410 mm (height); Minimum panel/cover size: 170 mm (width) × 105 mm (height); Panel thickness: 1 mm (min.) – 4 mm (max.); Spine width: from 6 mm (min.) to 80 mm (max.); Maximum speed: 60 covers per minute; Compatible size range: min. 105 × 170 mm, max. 410 × 720 mm; Supported cover thickness: 0.1–2.5 mm. Iodpfx Asxnhr Ioacebc

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Ibsdpfequuxuex Aacec Manufacturer APV TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA tenting trolley: - electric trolley feed with smooth speed regulation - trolley adjustable at an angle - feed motor 0.46kW - table size L/W 700x450mm with extension up to 1150mm - transverse gear on the trolley - cutting length on the extendable telescope 1860mm - rotating block in the gear - 2 pneumatic clamps saw for cutting to length: - max. blade diameter 380mm - max. cutting height 110mm - blade adjustable up/down, front/back and at an angle - blade guard - saw motor 2.2kW tenting mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 320mm - spindle diameter 40mm - spindle working height 220mm - spindle lock - 7.5kW motor profiling mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 200mm - spindle working height 220mm - spindle diameter 54mm - spindle lock - steady rest extendable from the table - 7.5kW motor saw for cutting out glazing bead: - max disc diameter 200mm - disc hole diameter 30mm - adjustable disc front/back, top/bottom - disc cover - 2.2kW motor feed: - number of rollers 8pcs - motor approx. 0.55kW Ibedpfxjtx T Dxs Aacec - roll size 110x50mm - 8 types of feed speed 4,6,8,10,12,15,20,30m/min - diameter of the exhaust port 60mm, 2x130mm, 110mm, 100mm - working pressure 6-8 bar - dimensions length/width/height 3600x2100x1600mm, weight about 2500kg ADVANTAGES - for window production - pneumatic mandrel stroke - trolley with electric feed - saw for cutting to length - tenoning mandrel - unpainted, used machine, very good condition Net price: PLN 27,900 Net price: EUR 6,570 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Water conditioner for insulating glass production Ostmose plant Ibjdpot Et I Asfx Aacsc

Condition: excellent (used), Year of construction: 2023, GHS Type: VDS-S30 / VUTS-EC Vacuum Drying Oven with Vacuum Pump Year of Manufacture: 09/2023 Professional vacuum drying oven with pass-through function – ideal for cathode & anode materials The GHS VDS-S30 / VUTS-EC vacuum drying oven is used for drying cathode and anode materials in battery cell manufacturing. Additionally, it serves as a pass-through into controlled dry rooms (e.g. Ibodpfew Ekd Djx Aacsc

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203351, total length: 3,750 mm, total width: 1,340 mm, total height: 1,870 mm, type of input current: three-phase, input voltage: 400 V, working width: 120 mm, power: 33 kW (44.87 HP), overall weight: 5,650 kg, The Schroeder PAKE 120 is a four-sided planing and profiling machine designed specifically for the precision processing of solid wood elements, especially in the production of parquet strips, floorboards, and other wooden components. Suitable for workpieces up to 120 mm wide, with adaptable tooling for various widths and profiles. The machine is designed to process short wooden elements starting from approximately 200 mm in length, making it ideal for parquet production. Depending on the configuration and material, the machine supports feed rates from 15 to 50 m/min, suitable for both high-volume production and precision work Iodpfx Aajxm Staecebc

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Ibjdpfx Aaoxhgl Tecoc Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: A40 1438, DIMAC Packaging Star F30 USED DIMAC Star F30 packer & thermo tunnel used for bottle packaging (3x2, 3x3, 4x3) 2003 Year - Currently machine is stored in WH. Also for SALE LINKER CSW-30 & BTG-1M €19,000 PACKER SHRINK WRAPPER LINKER EUROPA SP z o.o. SERIAL SW-001/03/2007 YEAR 03/2007 CAPACITY 30 cases / minute +Thermo tunnel for transparent & printed shrink foil THERMOTUNNEL Ibedpfxstyu N Es Aacec MANUFACTURER TERMO-PAK MODEL BTG - 1M SERIAL 3755 YEAR 11/2016 CAPACITY up to 7200 bph

Condition: excellent (used), Year of construction: 2003, HMC 500 control unit Ibodew Hxtvspfx Aacoc Year of manufacture: 2003 incl. software ball end mill; face mill; drill; taper tools: woodworking tools; etc.

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molds for capsules, manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, manufacturer: ARBURG, model: 720A3200-800, year: 2017 Item 03) Extraction system for 16-cavity capsule, manufacturer: Beck, year: 2019 Item 03) Extraction system IML system for 32-cavity capsule, manufacturer: Beck, year: 2019 Ijdpfx Aaow Nriujcjbc

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Iedpfx Aasw Dn Uwjcjbc Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: excellent (used), Year of construction: 2024, S/S. COMPLETE TETRA PACK ICE CREAM PLANT. Ibodpevzny Nofx Aacsc 1 x Complete Tetra Pak ice cream plant. All s/s. Latest technology. Includes gantry. Lift out: TBC This world-class 1500 litres per hour ice cream plant was housed in a state-of-the-art facility combining advanced technology, efficiency, and quality control to produce top-tier ice cream in an environmentally responsible way while remaining adaptable to new consumer demands and trends. Large, refrigerated milk silos dedicated to keeping ingredients fresh, smaller IBC storage for non-dairy. The ingredients would be carefully measured and dispensed into the production line to ensure consistency. After ingredients are measured, they would be transferred to a large high shear pasteurization machine to eliminate bacteria and improve shelf life while retaining the quality of the ingredients. This process happened in a controlled environment, with precise temperature and timing regulation. The ice cream mixture would then undergo homogenization, where it is passed through high-pressure systems to break down fat molecules and create a smooth, creamy texture. This is a crucial step to ensure that the ice cream has the perfect consistency and mouthfeel. Once the base mix is ready, flavours could be added. This could include natural fruit purees, chocolate, vanilla, or even exotic ingredients. There would be a separate line for adding inclusions like nuts, chocolate chips, caramel ribbons, or swirls. The flavoured mix would then be sent to freezing machines. These machines rapidly freeze the ice cream mix while continuously churning it to prevent the formation of large ice crystals. This process ensures the smooth and creamy texture that is characteristic of premium ice cream. Once the ice cream reaches the perfect texture, it would be dispensed into moulds, then quickly hardened in a blast freezer to maintain its integrity during storage. The plant has sophisticated software systems for inventory management, quality control, and tracking production. Sensors and automated systems would monitor temperature, consistency, and flavour levels at every step. A fully computer controlled CIP plant ensured consistent and continuous levels of hygiene throughout the plant. This world-class ice cream plant had a focus on sustainability.

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) Isdpfx Aswa D Npsacobc - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: used, Year of construction: 2021, ST GROUP – Year 2021 Insulating Glass Line H 2500 mm Automatic Washing Machine with 6 Brushes Low-E Automatic Gas Press with Moving Plates Tilting Table for Unloading Overall Length 24 m Ibedjxlirdepfx Aacec

Condition: used, Year of construction: 2000, functionality: fully functional, Lisec IGU line 1.6x2.5 + robot Grinding of Lowe glass Washing machine Ibodpsxnin Djfx Aacoc Glass overview Press Robot Machine in working condition Height: 1.6 meters Length: 2.5 meters

Condition: ready for operation (used), functionality: fully functional, A special machine is for sale. It is a complete production line for the manufacture of heating segments. The production line was built and developed by Bosch itself. The heating segments are suitable for instantaneous water heaters. You can see a picture of the segments in the 2nd picture of the picture gallery. The production line also includes a test station. Everything is apparently available in terms of documentation. Isdpsw R Su Hsfx Aacebc

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: AFOFL-600-4BF, We offer a pre-owned Afoflame™ Select – a professional continuous grill oven featuring direct flame technology, ideal for fast and uniform grilling of food products. Key Features: - Adjustable belt speed and height (manual or electric) - Adjustable burner output (flame length and intensity) - Adjustable convection heat (PID control) - Short grilling times – with no increase in product core temperature - Minimal weight loss and low energy consumption - Standard belt widths of 300, 600, or 1000 mm (other sizes on request) - Removable conveyor for easy cleaning and maintenance - Suitable for raw, cooked, chilled, or frozen products Ibsdpfsxdcp Tox Aacoc - Can be integrated inline with other processing equipment - Fully insulated oven – minimal external heat radiation - Optional fat separator to prevent fire hazards and control odour - Can be fitted with top and/or bottom flame burners and grill markers Optional Equipment: - Continuous belt cleaning brush with reduced water usage - Belt height regulation via encoded motors with position detection - “Easy Transfer” belt to prevent product sticking - Remote access via Internet - Liquid application spray system (oil, caramel, seasoning, etc.) The machine is fully functional and ready for immediate operation. Ideal for food processing facilities aiming to enhance efficiency and achieve superior grilling quality.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, We are selling our Horizon SPF brochure production line due to the transition to online connected systems. Iodow Tlfwjpfx Aacobc The machine is under a Horizon maintenance contract. Year of manufacture: 2021 Operating cycles: 1.1 million

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz Ibsdpjhlnzkjfx Aacec - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Iodpfx Aou Rwa Ijacsbc Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed Ibodpfx Asd N H A Noacjc - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 Iedpegd Ipksfx Aacjbc throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel Ibjdpfx Aaoikrtqscoc - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Isdpev Tp D Tefx Aacebc Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition