Used Window Frame for sale (17,740)

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Bjdpfxsfk Ew Ej Agzswi Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: Bedsyl Afrepfx Agzswi This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings (fitting type can be changed with additonal costs on request!)!) ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling Bwsdpfx Ajxa Hi Nogzsi -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping -----...

Year of construction: 1980, condition: ready for operation (used), functionality: fully functional, For sale: EWD HDN 600 Swing Frame Saw The EWD HDN 600 is a heavy-duty swing frame saw, engineered for use in medium to large-scale sawmills. It features a robust construction and state-of-the-art technology to ensure maximum efficiency and precision in timber processing. Technical specifications: • Stroke: 600 mm • Passage width: 730 mm • Passage height: 700 mm • Maximum speed: 320 rpm • Feed rate: 0–13 m/min, infinitely variable • Feed drive power: 8.5 kW • Pulley diameter: 1000 mm • Maximum drive power: 160 kW • Total weight: approx. 12 t Features: • Hydraulic feed system: Infinitely variable across the full range for optimal coordination between saw speed and feed rate. • Automatic overhang adjustment: Automatically adapts to the selected feed rate to minimize upcut and ensure superior surface quality. • Cooled upper frame guides: Reduce wear and ensure smooth machine operation. • Rugged design: Durable and low-maintenance, ideal for continuous use in demanding production environments. Condition: The machine is in excellent condition, has been regularly maintained, and is ready for immediate operation. Fully hydraulic, with automatic overhang adjustment Hydraulic saw tensioner and saw blade installation Bedpsymgy Nefx Agzowi Drive motor and gear assembly Electrical cabinet with controls Splitter wedge type AVER, hydraulically driven In very good condition, year of manufacture 1990, ongoing manufacturer servicing Top condition with remote-controlled carriage

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Bsdex Tu N Hspfx Agzswi Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Circular saw unit Motor power: 3 kW Saw motor speed: 3,000 rpm Circular saw diameter: 400 mm Max cutting height: 125 mm Bjdpfx Agoyk Df Djzowi ----- Tenoning shaft Quantity: 01 Shaft diameter: 50 mm Shaft length: 320 mm Motor power: 7.5 kW Shaft motor speed: 3,200 rpm Max tool diameter: 320 mm ----- Profiling spindles (2) Shaft diameter: 50 mm Shaft length: 320 mm Motor power: 7.5 kW Shaft motor speed: 6,000 rpm Max tool diameter: 240 mm ----- Strip recovery unit Quantity: 01 Shaft diameter: 30 mm Motor power: 2.2 kW Saw motor speed: 6,000 rpm Strip recovery saw diameter: 200 mm

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Bwedpfx Agodwf Dbozoi

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Bsdpfx Agopy Eufozowi

Condition: excellent (used), Working width 3200 mm year of manufacture 1992 motor power 7 kW pressing time adjustment automatic opening emergency stop switch - pull cord Bwedpfeypg Rmox Agzsi

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder Bwsdpsxdttisfx Agzji - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Bwjdpfx Aeg U Uv Regzoi Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2026, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Bwsdpfx Ajd Hx Uqegzoi

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Also for other Esterer creel types stilts and spare parts available. Bwodpfjip Uf Uox Agzji

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Bwodpfxsuql Ilo Agzei Fully hydraulic. With hydraulic saw tensioner. Ideal as a replacement sash gang or swing replacement.

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety Bjdpfx Aex Nqqxsgzswi The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: good (used), Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool Bwjdpfxob A S U Rs Agzoi -Hole: Ø 50 mm -Weight: 14 kg

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Bwjdpfxshhil Tj Agzoi Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Bsdpfxjdzc Rxj Agzewi Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper Bwodpsb Tmrvjfx Agzsi 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Bedpfx Agoul Uaaozjwi Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dust extraction connection 120mm Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. Bwodpfxedzc Rfj Agzji A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: excellent (used), functionality: fully functional, mileage: 160,000 km, first registration: 06/2016, fuel type: diesel, overall weight: 2,743 kg, fuel: diesel, color: white, emission class: euro5, number of seats: 6, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, fog lights, sliding door, Fiat Scudo 6-seater Year 06/2016 Diesel Manual 6-speed transmission + R Engine displacement 1,997cc 94 kW (130 HP multijet) Euro 5B Payload capacity 826 kg Gross vehicle weight 2,743 kg Overall vehicle length 4,813 mm Air conditioning ABS Bodpfeyir U Rex Agzswi Electric mirrors and windows 12-month warranty on engine and gearbox 160,000 km.

Condition: good (used), Window rubber, cutting machine, seal cutter -Hitches: 2 Bwsdjb A Ncgopfx Agzei -Dimensions: 2500/600/H1000 mm -Weight: 15 kg

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Bjdpfjyhzhhjx Agzjwi Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: ready for operation (used), Year of construction: 1982, Rotox drilling machine for window handles, handle drilling machine Bodpfx Agjyn I S Nszjwi