Used Wet Cutting Table for sale (27,311)

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard Dcsdoyyap Eepfx Aqvsp • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut with optimal precision. Automatic initial height sensing, automatic arc regulation, and intelligent collision protection ensure maximum quality and the highest repeat accuracy. The automated program sequence and the long service life of consumables actively help to significantly minimize cutting costs. The oxy-fuel cutting process also impresses with its straightforward handling and functionality. Thanks to the automatic piercing function, preheating times and the supply of cutting oxygen are controlled by CNC. This allows plates up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane gas and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on machined surfaces. The robust cutting grate features staggered, serrated support slats, providing optimal support for sheets and reducing slag formation on workpieces, as well as excessive wear on the slats, ultimately saving substantial costs on rework and maintenance. The tank depth is precisely designed to accommodate slag and support its cooling, is easy to clean, and effectively captures dust generated during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Material thickness Plasma: 1-25 mm Material thickness Oxy-fuel: Dsdox Ngn Topfx Aqvscp 10-80 mm We look forward to hearing from you!

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting Dodpfo Agnz Nox Aqvscp 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 200 h, machine/vehicle number: 2509328, laser source manufacturer: Raycus 12,0 KW, laser power: 12,000 W, overall weight: 27,750 kg, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, HEZINGER LaserLine HLC 2060 – 12 kW – Year of manufacture 2025 – only approx. 200 operating hours For sale is a virtually new HEZINGER LaserLine HLC 2060 fiber laser cutting system, year of manufacture 2025, with a powerful 12 kW Raycus laser source. The system has been used very little – according to the operator, approximately 200 production/operating hours – and is currently connected and ready for demonstration in 56736 Kottenheim (Germany). Technical data / equipment: • Cutting area: 6,100 × 2,000 mm • Laser power: 12 kW • Laser source: Raycus • Cutting head: RayTools BM115 Djdpfxj Ahzcxj Aqvecp • CNC-controlled exchange table • Table load max. 4,000 kg • Axis speed up to 150 m/min • Acceleration up to 4 g • Automatic 8-position nozzle changer • Laser beam camera • Automatic nozzle cleaning and head calibration • Automatic sheet metal correction • Bomaksan filter/extraction system • Scrap conveyor with side outlet • S&A laser cooler • Libellula Wizard • Remote control • CE version Machine dimensions approx. 16,725 × 5,020 × 2,600 mm, machine weight approx. 27,750 kg. These data correspond to the manufacturer's documents. 435814a5-b20b-4a55-b672-8590139… The system offers an interesting alternative to a new order, especially for companies that require a high-performance 12 kW laser cutting system in the large format of 6 × 2 m in the short term. Inspection and demonstration under production conditions are possible by appointment. Location: 56736 Kottenheim, Germany Availability: short-term Technical specifications based on manufacturer's documents or operator's information. Subject to errors and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, operating hours: 4,000 h, laser power: 10,000 W, working range: 3,000 mm, Used Bystronic Bysmart 3015 fiber 10kw cnc laser cutting machine for sale Year: 2021 Technical specs / Details table length: 3000 mm table width: 1500 mm burner heads: 10,00 Watt / 10kw Bysprint / Bystar fibre laser Description Complete with: Auto focus Auto nozzle centring Dcodpfjucd Awjx Aqvep Nominal sheet size xy: 3000 x 1500 mm Cutting area xyz: 3048 x 1524 x 70 mm Positioning accuracy Pa: +/- 0,1 mm Repeatability Ps: +/- 0,05 mm Maximum workpiece weight: 890 kg Operation via panel: ByVision Touchscreen and manual control unit

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,600 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 950 kg, input current: 16 A, warranty duration: 12 months, input voltage: 400 V, GLASS CUTTING TABLE – MANUAL – BRAND NEW Model: SDRXL FULL Year of manufacture: 2026 – brand new Manufacturer: EXPOGLASS® (Poland) – for over 11 years we have been supplying glass cutting tables to workshops on 3 continents. Our background in flat glass processing has allowed us to design equipment with exceptional durability and functionality. Standard equipment: Manually extendable supports for vertical loading (with replaceable ash wood blocks), 4 swivel polyamide wheels Ø80 mm for heavy loads, 4 adjustable leveling feet, Worktop covered with highly durable black felt + ash wood edge strips, Two steel plates mounted underneath for easy unloading with a forklift, Dcodpef Svtksfx Aqvop Lower beam filled with reinforced vibrated concrete for maximum stability, Pneumatic tilting with hydraulic speed controller, Longitudinal and cross breaking bars, pneumatically operated by foot pedals, Air cushion with integrated 2.2 kW high-pressure fan for easy handling of heavy glass sheets, Adjustable breaking bar height. Technical data: Weight: 950 kg Table size: 340 × 260 cm Height: 91 cm (adjustable ±2 cm) Power supply: 400 V, 50 Hz, 16 A plug (5 pin) Air connection: 7 bar, standard 7.2 NW fitting Documents & warranty: Declaration of conformity with EU Machinery Directive, CE marking, EU EMC declaration, Warranty: 12 months, Operating manual (Polish & English). Condition: brand new, ready for immediate use. Delivery: we organize worldwide transport (EU and beyond).

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional Dodpoz Nyv Tjfx Aqvjcp * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt Dodpfxsf Sqffj Aqvecp - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: used, saw blade diameter: 500 mm, overall weight: 600 kg, No. 04547 Under-table crosscut saw Paul 15 AOM Used Saw blade diameter max. 500 mm Main saw motor power 4.4 kW Max. cutting height approx. 150 mm Max. cutting width approx. 875 mm Max. cutting width at 150 mm cutting height approx. 720 mm (with Ø 500 mm saw blade) Hydraulic saw feed Dodpfsz Eu Ubox Aqvscp Lifting force 2500 N Up to 25 cuts per minute Two-hand operation Hydraulic power unit Dust extraction connections Incl. 2 roller conveyors (approx. 2900 x 700 mm and approx. 1550 x 700 mm) Transport dimensions machine approx. 1200 x 1200 x 1400 mm LWH, roller conveyors approx. 3000 x 1200 x 800 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1977, Sliding carriage: 2500 mm Cutting width: 1000 mm Dcedpfx Aqj Ahhm Hjvep Scoring motor: 4.8 kW Location: Nattheim

Condition: used, Year of construction: 1997, CNC-controlled high-pressure waterjet cutting system with two cutting heads, abrasive feed, and two external high-pressure pumps. Manufacturer: H.G. Ridder Automatisierungs-GmbH Model: HWH-6020-2 Machine type: CNC waterjet cutting system Year of manufacture: 1997 Working area: 6,000 x 2,000 mm Number of cutting heads: 2 High-pressure pumps: 2 external pumps Maximum pump pressure: 4,000 bar each Control system: Siemens SINUMERIK Cutting process: Waterjet cutting with abrasive feed Cutting head designation: WARDICUT Dcsdj Aiccdepfx Aqvep Abrasive feed: Present Cutting table: Water basin with slat support Machine order number: 10317 Electrical schematic number: E-10317 Electrical connection value: 100 kVA Mains connection: 3-phase Mains frequency: 50 Hz Operating voltage: 400 V Control voltage: 230 V AC / 24 V DC Rated current: 150 A Intended upstream fuse: 200 A, slow-blow

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. Dsdpfx Aqs Agixyjvocp - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW Dcedpfxj Afm Hie Aqvep - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: reconditioned (used), - Paul crosscut saw 15 AO Dcsdjw Slgfjpfx Aqvsp - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long

Condition: good (used), Year of construction: 1986, functionality: fully functional, Equipment: saw blade guard, scorer, The panel saw comes with approximately 10 saw blades and scoring saws, as well as a laser. Dodpfey Suidjx Aqvjcp

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller Dedpfx Aqsd Tamdevscp - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Djdps Af Aqwefx Aqvocp Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table Djdpfs Ahkc Tjx Aqvecp - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Dcsdpeu R Sycsfx Aqvjp - new exhibition machine -

Condition: good (used), functionality: fully functional, Year of construction: 2008, The machine is powered on and can be inspected at any time. TRUMPF TruLaser Tube 7000 (T02) X working area max.: 6500mm Y working area max.: 320mm Control system: SINUMERIK 840D Standard equipment: Machine - Rotating and feed station with self-centering clamping jaws - Tube support for raw material with automatically retractable tube supports - Feed chuck with self-centering parallel clamping rollers - High-precision drives - Unloading station with brush table, finished part lengths up to 3000mm - Tube support for finished parts with extendable guide rollers - Enclosed beam guidance - NitroLine - SprintLine - Laser power control - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - X-axis table movement, pneumatic - FocusLine - More powerful compact dust extractor - Max. outer diameter 200mm - Max. raw material length 6500mm - Min. raw material length 2500mm TRUMPF Laser - CO2 laser TruFlow 2000 - High-frequency excitation - Maintenance-free turbo radial blower - Laser control TASC 3 - Laser logbook function - Cooling unit Cutting head - Laser cutting head with 155 mm (6") lens - Cutting head quick-change device - ControlLine Control system - Easy operation with touchscreen - Diagnostic functions - Integrated technology data Data transfer - RJ45 network connection and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and coolant - Compact dust extraction system - Protective cabin with Makrolon panels + TruFlow 3600 + Unloading at the front and rear + SeamLine Tube + Teleservice via modem instead of via the internet Dcedj Ahi Tgspfx Aqvop Automation LoadMaster Tube 6m + LoadMaster Tube 6m with bundle support, 2 gripper options LoadMaster Tube 6m + Scratch protection arms, bundle support LoadMaster Tube 6m + Swiveling conveyor belt LoadMaster Tube 6m

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 451 PORTATİF KESİM MAKİNASI Ø400 mm, • Used for cutting aluminum and PVC profiles • Diamond-tipped saw blade • Double spring system and saw blade guard for safe cutting • Capability to cut at any desired angle between -45 and +45 degrees on the top table • Angle locking to the right and left at 0, 15, 22.5, 30, and 45 degrees Dcjdpfx Aqjrcm Absvop OPTIONS • Lower cabinet body system • Right-left measuring system • Pneumatic press and cooling system

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Dcodpfof Ncadjx Aqvep Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube Dcodpfxo Ahi Tro Aqvop + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor Dedpfxeu R Sype Aqvecp complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: used, Year of construction: 2013, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Djdpfx Aqs Ahx Stsvocp Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source with automatic gas console and Contour Cut Extraction table 41126ä