Used Warm Hold Counter for sale (4,947)

Condition: excellent (used), I am selling a very good Erowa UPC chuck at a fair price. I also have other Erowa clamping systems in stock. Just ask, and I can provide some pictures. Cjde Ahtttopfx Ap Dehd

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Chedpfjf Dlzujx Ap Dod Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: like new (used), 195 1940 M2 24 VDC Application: Machinery/Plant Engineering Width: 50 mm Height: 49 mm Depth: 85 mm Chjdpszfglbefx Ap Dsd Weight: 170 g Condition: Like new

Condition: used, functionality: unexamined, Used BT45 holders, a total of approximately 100 units. Chjdpfxe Ad Ik Tj Ap Ded

Condition: ready for operation (used), Year of construction: 2010, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Chsdpfsvnu Akjx Ap Dod Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: used, Heraeus Type: B 6030 Incubation chamber Volume: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50°C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Chedpfxozdtiqs Ap Dsd Weight: approx. 41 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm Cedpsvnuq Isfx Ap Djhd - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: excellent (used), We have a large quantity of these identical units. They have come from the corporate hospitality areas of Wembley Stadium. Cedou S E Tvepfx Ap Dshd

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Chsdpfjyln Ekox Ap Dod

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Coil holder Coil outer diameter: 1,550 mm MACHINE DETAILS Manufacturer: UBK Dimensions Length: 2,000 mm Codpfxe Ad Iurj Ap Dohd Dimensions Width: 600 mm Dimensions Height: 1,700 mm Weight: 700 kg

Condition: used, diameter div. Cods Ahzhvspfx Ap Dohd number 16x tool adaptor HSK-A 63

Condition: excellent (used), mileage: 147,000 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 71 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, Equipment: AdBlue, Bluetooth, USB port, airbag, central locking, electric window regulation, fog lights, power mirror, sliding door, start-stop system, = Additional Options and Accessories = - 7-inch touchscreen - 12-volt socket - Outside temperature display - Heated side mirrors - Passenger airbag - Passenger seat - Load compartment lighting - Hill start assist system - Car kit - DAB radio - Third brake light - Driver airbag - Cupholders - Height-adjustable steering wheel - Keyless start/go - Front center armrest - Emergency call system - Radio - Rain sensor - Reversing camera - Insulated glass - Immobilizer - Partition without window = Notes = Mercedes-Benz Sprinter 317 CDI – 170 hp | 9G-TRONIC | 3.5T Very well-equipped Mercedes-Benz Sprinter 317 CDI with an efficient 2.0-liter diesel engine producing 170 hp, combined with the comfortable 9G-TRONIC automatic transmission. ✔ 3,500 kg permissible total weight ✔ 170 hp ✔ 9G-TRONIC automatic transmission ✔ Euro VI ✔ High roof ✔ Wheelbase 3,665 mm ✔ Reversing camera ✔ MBUX multimedia system with 7" touchscreen ✔ DAB digital radio ✔ Crosswind assist ✔ Rain sensor Cjdpfx Apjycvx He Djhd ✔ Electrically adjustable and heated exterior mirrors ✔ Electric sliding door on the right ✔ Double rear doors 270° ✔ Comfort driver's seat ✔ Driver and passenger airbags ✔ M+S tires ✔ Cruise control ✔ ECO Start/Stop ✔ HVO compatible ✔ 71-liter fuel tank A professional, comfortable and versatile Sprinter, ideal for transport, distribution and daily commercial use. Interested? Contact Auto Viger for more information or to arrange a viewing. Refrigeration unit brand: Webasto = Further Information = General Information Year of construction: 2022 Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Transmission: 9G-Tronic, 9 gears, Automatic Front axle: Steered Weights Unladen weight: 2,675 kg Payload: 925 kg GVW: 3,500 kg Functional Refrigeration engine: Diesel Maintenance APK (Technical Inspection): New TÜV upon delivery Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: 12 months Further Information Please contact Lorenz Schoutteet for more information.

Condition: good (used), MEYER tine adjustment with load holding clamp Condition: used Size: FEM 2 Cjdown Ic Nopfx Ap Dehd

Condition: good (used), NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection Codpfxerh Et Ds Ap Dehd

Condition: good (used), Various quick-change tool holders, a total of 32 pieces: 7 pieces WDL 4/50 10 pieces WDR 4/40 6 pieces WDL 4/40 3 pieces WB 4/60⌀ 3 pieces WBW 4/60⌀ 1 piece WBW 23/60⌀ 2 pieces, type unspecified Please let us know which items you are interested in so we can provide you with a quote. Cedpfx Apsy N S Ifj Djhd

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece Cedpfx Apeyk Dipe Dshd -Dimensions: 280/205/H135 mm -Weight: 2.4 kg/pc.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Codpfx Aszr T Dkep Dshd Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 2007, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and Chsdpfjvnux Eox Ap Ded plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Chsdpfezdkc Usx Ap Dod Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Quantity: 18 units Tool holder: SK50 MACHINE DETAILS Dimensions Length: 800 mm Width: 600 mm Height: 500 mm Chsdpfxs Ad Aflj Ap Dod Weight Weight: 100 kg

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change turning tool holder -Type: unfortunately without a type designation -Recording dimensions: see photos -Tool holder: H35 x 125 mm -Number: 4x steel holders available -Price: per piece Cjdps Ah Emzefx Ap Djhd -Dimensions: 125/55/H130 mm -Weight: 2.3 kg/pc.

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder Cede Ah D A Ujpfx Ap Dehd -Quick-change tool holder: Quick-change turning tool holder -Type: B2D 25120 -Recording dimensions: see photos -Tool holder: H25 x 120 mm -Number: 13x steel holders available -Price: per piece -Dimensions: 120/50/H100 mm -Weight: 1.5 kg/pc.

Year of construction: 2018, condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood warmer The unit is in full working condition and is ready for immediate use The Transmed Sahara III Maxitherm is a high-performance, dry-tempering system engineered specifically for the safe and efficient warming of blood products, plasma, and infusion solutions. Unlike traditional water baths, the Sahara III utilizes dry heat technology to eliminate the risk of waterborne contamination, making it a superior choice for sterile clinical and laboratory environments. Chsdpsyuy Ipefx Ap Ded

Condition: used, Year of construction: 1987, Dematic roller curve left 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° counter-clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Codpfx Aov Dyymop Dshd Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Codpfsf Dlzqjx Ap Dshd Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.