Thermo Heraeus Incubator Warming Cabinet 30 L 50°C B 6030

Heraeus B 6030

Condition: used, Year of construction: 2023, Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours. Iedpfxszwfr Rs Afusbc

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) Ibodjzzz R Dopfx Afuec - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Iedpfx Aezzz Rdjfusbc Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Ibjdjz Dnu Espfx Afuoc Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: used, Year of construction: 2004, The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system. Additional title: Repackaging of full pallets containing modular crates into pallets containing pi Capacity approx.: 200 crates/h Isdpfx Afey Nm Hvsujbc Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm) Running direction: right -> left Operation / Control: on-site control unit / Siemens PLC Position: free standing Base construction: Square tube construction bolted to the floor Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 32-00-0153-5 / 32-00-0114, type of input current: AC, total height: 2,622 mm, total width: 1,911 mm, total length: 3,764 mm, overall weight: 1,150 kg, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, 2x ETT Packaging Technology Tray Erectors (Cardboard Tray Erectors) – TF 30 L (2014) + TF2 (2020) – including complete documentation For sale are two used, high-quality tray erectors from the renowned German manufacturer ETT Packaging Technology (Made in Germany). Both machines come from a company liquidation, have been dismantled, and properly disassembled. They are in good, functional condition (only dusty) and come with complete documentation (layout, CE declaration of conformity, parts lists, electrical diagrams, operating manual, etc.). All format tools are available. Machine 1: Tray Erector TF 30 L • Machine No.: 32-00-0114 • Year of manufacture: 2014 • Weight: 2,600 kg • Power: 15 kVA • Connection: 3x400 V/N/PE 50 Hz • Air consumption: 30 NL/min at 6 bar • Dimensions (L x W x H): 3,677 x 1,603 x 2,408 mm Negotiable net price: €25,000 Isdpfxez R Ucxj Afuobc Processable formats (Fefco 0453, hot glue): 1. 292 × 187 × 218 mm – approx. 25 pieces/min. 2. 396 × 286 × 241 mm – approx. 23 pieces/min. 3. 592 × 388 × 300 mm – approx. 18 pieces/min. Equipment (excerpt): Control cabinet Rittal, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens S7-300, operating panel Siemens. Machine 2: Tray Erector TF2 • Machine No.: 32-00-0153-5 • Year of manufacture: 2020 • Weight: 1,150 kg • Power: 11 kVA • Connection: 3x400 AC/N/PE 50 Hz • Air consumption: 300 NL/min at 6 bar • Dimensions (L x W x H): 3,764 x 1,911 x 2,621.5 mm Negotiable net price: €35,000 Processable formats (Fefco 0453, hot glue): 1. 320 × 235 × 120 mm – approx. 25 pieces/min. 2. 395 × 290 × 243 mm – approx. 23 pieces/min. 3. 590 × 385 × 309 mm – approx. 18 pieces/min. Equipment (excerpt): Control cabinet Rittal/ETT, frequency inverter SEW, hot melt gluing device Nordson, control system Siemens 1512SP, operating panel Siemens KTP700. Both machines are Made in Germany, with high-quality components (Siemens, Nordson, SEW, Rittal) and are ideal for professional use in end-of-line packaging. Condition: good and functional, only dusty. All format tools are available. The machines have been dismantled and properly disassembled. Terms of sale: Commercial sale. Delivery and collection possible by arrangement. Location: 41564 Kaarst-Holzbüttgen. Upon request, we will gladly send you further documents, detailed layouts, parts lists, and current pictures of the machines. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210182, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2026, F2010 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 350 mm - max. 1,000 mm - Width: min. 150 mm - max. 650 mm - Height: min. 200 mm - max. 650 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 840 cartons/min (depending on length and quality of the carton) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photocell - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Protection class IP 54 - Compressed air 6 bar - Air consumption 22 nl - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable by +30 mm - Weight 490 kg - Dimensions of erector including sealer in mm (l x w x h): 3,480 x 2,426 x 2,413 - CE safety protection The system includes a GEM B670 carton sealer. GEM B670 CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 150 mm - max. 670 mm - Height: min. 100 mm - max. 670 mm TECHNICAL DATA: - Drive and guide belts, vertical - Carton format adjustment, manual - Sealing unit, bottom - Standard version T22 / T23 - Adhesive tape width: from 38 to 50 mm, depending on the unit - Tension adjustable Iodpfx Aez Dwn Uofuobc - Max. adhesive roll diameter: 360 mm - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Consumption 0.25 kW - Protection class IP 54 - Operating environment +5° C - max. +35° C - Transport speed 22 m/min - Average production: 1000 cartons/hour - Working height 650 mm - Weight 168 kg - Dimensions of erector including sealer in mm (l x w x h): 3,480 x 2,426 x 2,413 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) Image may include optional features that incur an additional charge.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Ibjdpjz Rvpfjfx Afuec Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 550 cm x 110 cm, disassembled. - 216 x crossbar approx. 270 x 14 x 5 cm, T30. - 432 x safety pins. - Levels: Floor + 3 - 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 14.930,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.