Used Vertical Pack Wrapper for sale (10,567)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Pedpjh Ek H Sofx Adzsra Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Prsdpfx Aszhx A Rjdzoa Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Prsdpfozwl N Nsx Adzoa Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Prsdezv Tlvspfx Adzoa Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Year of construction: 2012, condition: ready for operation (used), A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible. Podpfsv Ubqhsx Adzjra

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Predpsv H Dgpjfx Adzsa

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Prjdpfx Adovva Hkezoa

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M. Prodpfxjtufb So Adzja

Condition: ready for operation (used), Year of construction: 2006, A Sema wrap-around packer for Tetra Rex soft packs is available. Output: single pack: 6000/h, 6-pack tray: 1000/h & 3.6s/tray, 10-pack tray: 600/h & 6s/tray. Documentation available. On-site inspection is possible. Pjdpfxsttbdts Adzora

Year of construction: 2002, condition: ready for operation (used), Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment. Prjdpfx Adjzukr Rjzja

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Podpoyddy Ujfx Adzera

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Podpfxjxwyvqo Adzsra

Condition: ready for operation (used), Year of construction: 2009, Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible. Pjdsxrui Iopfx Adzora

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Podpfexyk Upox Adzjra

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Psdpou Rc R Sjfx Adzera

Condition: ready for operation (used), Year of construction: 2000, A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible. Predpjwtg Hkjfx Adzsa

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Predsyw Sv Sspfx Adzja

Year of construction: 2023, condition: ready for operation (used), Offered is a semi-automatic metal circular saw. Saw blade diameter: 350mm, vise opening max.: 170mm, control: semi-automatic. Equipped with hydraulic vise, integrated coolant system, control panel. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1000mm/1200mm/2000mm. Inspection possible by arrangement. Predpfxsy Uyfce Adzja

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS Podpfx Asq Nqkxjdzera MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Pjdewl An Ijpfx Adzora Weight approx.. = 12.5 t

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Prjdpfx Adjwwau Nozsa Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, Pedpjzg Enqsfx Adzjra table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, 30 station tool changer, coolant, swarf conveyor

Condition: used, Year of construction: 2014, Mazatrol Smart Control Serial Number 249154 30 Tool Magazine EIA & Mazatrol Programming USB Ports No swarf conveyor No thru coolant UK Buyers - Price £32,000 +VAT Prjdpjzillhsfx Adzea Carriage/delivery is additional

Condition: used, Control system: Siemens 3-T Faceplate: 1500 mm Max. turning diameter: 1800 mm Max. turning height: 600 mm X-axis travel: 1995 mm Z-axis travel: 750 mm Predpfx Aozl D Rhsdzja Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Tool changer: 26 positions Machine is disassembled. Many tools and spare parts included.

Condition: used, Year of construction: 1999, total length: 4,850 mm, total width: 1,350 mm, total height: 2,830 mm, Colour: Grey Weight: 850 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 905312 - Max. cutting height vertical [mm]: 2150 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 380 - Current consumption [A]: 6 - Power [kW]: 2.2 Psdpozcb Sxsfx Adzsra - Transport dimensions: 4850mm x 1350mm x 2830mm (l x w x h) - Transport weight [kg]: 850kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels