Used Veneer Peeler for sale (564)

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Lrsdpfx Adjuvdzuoqji

Condition: good (used), functionality: fully functional, with heating wire, Ledpfxeyayzaj Adqori outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost!

Condition: excellent (used), functionality: fully functional, Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Ledpfxeyvtypj Adqjri Clearance 400 mm Water heating

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Lrodpfx Adsyfw D Aeqei Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg Lrjdjr I E Hcspfx Adqsi

Condition: excellent (used), Catalogue number 7740 Lrjdpfx Aeyk E Nqodqsi TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Ledpfx Adjyg N Enjqeri Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Weight kg 200

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Lodpfxsyg N Dws Adqsri Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm Lrsdpfx Aoh Elztodqoi -Weight: 24 kg

Condition: used, BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Lrodpfxjymb U Us Adqei Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min Complete line with : Loading table with chain transfer Entry Roller Way, adjustable Exit Roller Way, adjustable Electric equipment Hydraulic power pack Bar diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Lrjdpfxeymb Uus Adqsi Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: refurbished (used), functionality: fully functional, Refurbished six-piston hydraulic platen press of Italian manufacture. Branded multi-layer press designed for easy wood veneering, supplied with warranty and service support. Lsdpfsvvbbcox Adqeri Veneering plate dimensions: 3000 x 1300 mm Pressure at full surface: 2.2 kg/cm² Total maximum pressure: 80 tons Number of hydraulic pistons: 6 Teflon MYLAR film on the plates Piped for water-based heating of the plates Option to install a hot water boiler Price includes a fully refurbished machine Price: 10,000 EUR excl. VAT The machine will be refurbished, set up, and tested. The refurbishment status and machine readiness for collection must be confirmed in advance! In stock at Telnice near Brno, Czech Republic Testing, demonstration, and operator training included as standard.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). Lrjdpfx Asxuhw Dodqji ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: good (used), Year of construction: 2000, total width: 4,000 mm, total length: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, type of input current: three-phase, temperature: 160 °C, pressing force: 500 t, continuous press with mylar belt dimensions: 2700 x 3200 mm Lredpfxjycxvuo Adqei

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Lsdpfewx Rrnex Adqori Heating-up time approx. 20 min. Price ex works.

Condition: excellent (used), Fully functional veneer press by OTT, model JU60. Plates: 225x120 cm. 2x6 kW electric heating. Test run possible at any time. Lodsytyk Ijpfx Adqori

Condition: excellent (used), Fully functional veneer press by OTT, model JU2511/70. Plates: 255x110 cm (excellent condition). 2x6.8 kW electric heating. Test run possible at any time. Ljdpfxoytykus Adqori

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Lsdsw I E Dvepfx Adqjri

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Lredpsyf Eucefx Adqei Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: excellent (used), thread gluing machine zigzag stitching clearance 630 mm Lrjdpfx Aoyufgkodqji temperature control of heating element foot pedal operation power supply 230V year of manufacture 2000

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. Lredjdx R Tfepfx Adqei - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW Lsdsxgbxfjpfx Adqori - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Lredpfx Adextat Usqsi Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Number of pistons: 6 Electric heating Piston diameter: 75 mm Ljdpfxsyt I Ibj Adqjri Teflon film on the shelves External dimensions: 3700x1700 mm Year of production: 2001

Condition: like new (used), glue thread sewing machine Ljdpfxjyr Nmve Adqeri zigzag stitching pedal control arm clearance 650 mm 230V power supply