Used Vacuum Table for sale (19,172)

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Chjdpfx Ageukrcpjksa Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Chsdozq Aqwopfx Agksa Delivery terms: ex warehouse

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm Cjdpfxozqbg Ds Agksha W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, Resta Automatic Mattress Packaging Machine: Integrated Compression and Decompression The Resta mattress packaging machine is an automatic packaging machine designed for the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with mattress compression followed by decompression, while also protecting it in a suitable film. Advantages of Mattress Packaging in Production and Distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated Compression: Mattresses are bagged in PVC or plastic film, without manual intervention. Easy Decompression: The mattress returns to its normal shape in the store or at the customer's location. Optimized Transport: Significant reduction in volume, with more space in the truck and in storage. Presentation for Sale: Final presentation of the mattress in suitable commercial conditions. Vacuum Packaging Machine: Protection and transport of the mattress. What truly changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, including PVC film and plastic film, and ensures an airtight seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Chjdpfx Aozmpvregkea Compatibility with Spring and Foam Mattresses This is particularly beneficial when your production involves both spring mattresses and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment can accommodate both bagged mattresses and compressible structures, which simplifies workshop organization. Spring Mattresses: Compression without damage to the springs, thanks to a progressive hydraulic system. Foam Mattresses: Adaptation tailored to the product, with rapid shape recovery after compression. Compatibility with PVC film and other specialized packaging films. Professional Sealing: Airtight closure of the film to protect the mattress during transport. Industrial Applications and Mattress Packaging Processes In practice, on an industrial mattress packaging line, this automatic Resta packaging machine integrates after the… Special Feature: Enables double, independent packaging (two separate bags) within the same footprint as a standard packaging machine, thanks to two superimposed polyethylene rolls. Also allows for single or customized packaging (two different rolls, automatic change according to programming). The feed conveyor and disconnectable press also allow for packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official Technical Specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available Options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for disposal of polyethylene waste

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Chedpfey Emthsx Agksa The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction Chsdpfxeznr Srs Agkea - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position Codpfx Aozpbrqsgkeha - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Cjdpsya Dtmjfx Agkeha

Condition: used, loading : max. 50 to 55% (± 1.800 kg) Chedeziabwepfx Agksa all stainless steel Lutetia control adjustable speed (frequency inverter) 2 main motors (6,6 kW) dimensions (l x w x h) : ± 3.500 x 1.500 x 2.000 mm loading height : ± 1.150 mm weight 1.400 kg vacuum pump not included

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, GRAFFENSTADEN ARF 114 Z boring machine, photos and descriptions attached Machine in perfect mechanical and electrical condition Longitudinal travel: 2 m Cedjyzm Dfopfx Agkoha Transversal travel: 2 m Vertical travel: 1.75 m Spindle diameter: 115 mm Spindle stroke: 900 mm 1 Graffenstaden universal head 1 Andréa rotary table 1 extension 1 3-axis digital readout 2 feed ranges via variator for all movements Numerous tools included Machine can be seen in working condition Machine to be dismantled on site Tel: 03.80.92.23.28 or 03.80.92.34.03 or 06.79.58.06.79

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm Cjdpfx Aoznph Regkoha - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: excellent (used), Volume flow 3000 Codpoilug Sefx Agkeha Pressure 3400 Pa Filter 30 m2 Spindle speeds 2850

Condition: used, mileage: 158,175 km, power: 301 kW (409.25 HP), first registration: 09/2004, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Chsdpfxszp Dawe Agksa Internal number: #667 Wiedemann Super 2000 water recycling unit MAN TGA 26.410 6x2 Superstructure * Wiedemann enviro tec, stainless steel * Water recycling unit, 6.0 / 5.0 / 2000 * Approx. 12,000 liters total volume (air), of which 6,000 liters sludge / 5,000 liters flushing water volume * Unloading: Tipper * CAN control with wireless remote control * Outrigger arm (telescopic) with suction and flushing hose guide High-pressure system Uraca KD 716-G REC * 170 bar at 333 l/min * Flushing hose 1: approx. 150 m, reel for approx. 200 m DN 25, mounted on the outrigger * Flushing hose 2: approx. 60 m * Flushing hose 3: approx. 20 m Vacuum system * Wiedemann enviro tec * Approx. 2,000 m³/h at 1,300 rpm * Rotary vane pump * Suction hose approx. 6 m, reel on the tank, dirty water can be pumped out via the suction hose Special features * Equipment cabinet on both sides with two flaps * Soundproofing cladding in front of the pumps, extended upwards on the left and right * Tool box 2x aluminum * Advertising boards L+R integrated into the side paneling * Rotating beacons: cab 2x, superstructure 2x * Work lights: 2 halogen lights at the rear * Trash can / scrap box, vise, hand washing facility available * Air conditioning Technical data * MAN TGA 26.410 * 6x2 * EURO III * 409 hp / 301 kW * Manual transmission * Fuel tank: approx. 300 l * Color: Orange * Tare weight: 16,705 kg * Length x width x height: 9.74 m x 2.55 m x 3.50 m * First registration: 13.09.2004 * Mileage: approx. 158,175 km For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively under our general terms and conditions and with the exclusion of any warranty.

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Csdpfx Asvvi Nnjgkeha Storage location: Supplier

Condition: used, Year of construction: 1995, Storage location: Supplier Chsdjvvi Sijpfx Agkoa

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg Cjdpfx Agszlyp Hskeha

Condition: used, x-travel 2000 mm y-travel 1500 mm z-axis 3000 mm spindle diameter 100 mm table surface area 1.400 x 1.300 mm tool taper MK | dimensions 6,4 x 3,2 x 3,4 m weight of the machine ca. 11,0 t used table borer. - some tool holders Cedpfozmitdsx Agkjha - turntable with motor - coolant system - facing plate Ø 660

Condition: used, Year of construction: 1978, x-travel 1000 mm Chsdpezmir Tefx Agksa y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale Cedpjd E A I Nsfx Agkoha - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Chedpfx Agsthuzpekoa Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm Chjdeznn Hlepfx Agkja - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Cedpey Tlcwefx Agkjha BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Chsdpfx Ajy Tliwjgkja Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Condition: used, Year of construction: 1988, Immediately available from prototype construction: Table drilling machine Pfeifer Year of manufacture 1988, in absolute top condition Type F 105 Spindle diameter 105 mm Milling spindle mounting SK 50 Drilling spindle mounting SK 40 Travel distances X/Y/Z 1000/1000/1500 mm Table 1000 x 850 mm Table load capacity 4 tons Spindle speeds 14 – 1500 rpm Spindle stroke 500 mm Rapid traverse 2500 mm/min Spindle drive 7.5 kW, total 12 kW Weight 9 tons Chsdpfx Agjzrbyaskea Stop block Digital display Cabinet with many tools Price: Euro 8,500.00 plus VAT, ex works

Condition: ready for operation (used), Available immediately, ex works: Scharmann boring table Year of manufacture approx. 1985 Table size 1800 x 1600 mm Cjdpfezrbx Njx Agkjha Table load capacity 20 tons Travel distance (X-axis) 1250 mm Electric drive 4 kW Weight 9 tons Price: EUR 8,500.00 plus VAT, ex works.