Used Vacuum Compressor for sale (6,537)

Year of construction: 2026, condition: new, machine/vehicle number: 128, Working area: 3500 x 1500 mm (Frame internal dimensions approx. 3400 x 1400 mm) Folding table with 12 mm table top for space-saving storage Becker vacuum pump with 1.25 kW motor, 400 V, 50 Hz Vacuum pump flow rate: 40 m³/h Tank capacity: 100 l Natural rubber membrane with 700% elongation Max. component height approx. 600 mm External dimensions approx. 3600 x 1850 x 1000 mm incl. chassis with 4 swivel castors Weight approx. 440 kg excluding transport, ex warehouse Seevetal. Gedpfxjd Rzl Uj Ag Tska

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW Gksdezkg Iajpfx Ag Toa

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Godpfx Aszcwitog Teka Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: used, mileage: 32,189 km, power: 170 kW (231.14 HP), first registration: 07/2001, fuel type: diesel, empty load weight: 16,730 kg, maximum load weight: 2,770 kg, overall weight: 19,500 kg, tire size: 12R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: other, number of seats: 2, total length: 9,700 mm, Year of construction: 2001, operating hours: 1,492 h, construction height: 3,470 mm, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, The Mercedes-Benz Atego ZW with the special KROLL 950.50 ZW two-way track cleaning equipment is a used two-way suction and pressure vehicle. This vehicle was first registered on July 25, 2001 and has a mileage of 32,189 km. Powered by a 6,374 cc diesel engine with an output of 170 kW (231 hp), it meets the Euro 3 emissions class. It has a manual transmission with six gears and offers space for two people. The vehicle is equipped with a rail driving device that allows it to drive on tracks at a speed of up to 30 km/h. The body contains suction nozzles for picking up objects from the track bed and a dirt collection container with a volume of approx. 8.5 m². Other features include a pneumatic rake device, a dry filter system and a comprehensive fire monitoring and extinguishing system. The operating time is 1,492 hours. The robust Atego is painted orange and has dimensions of 9,700 mm long, 2,300 mm wide and 3,470 mm high. The total weight is 19,500 kg. With additional safety and control systems such as a sand spreading system, video surveillance and a hand hydraulic pump, this truck is particularly suitable for demanding rail cleaning tasks. Vehicle covered in stickers over a large area. TWO-WAY TRACK VACUUM CLEANER. Self-propelled work machine. Godpfx Asr Uzllsg Tjka ACCESSORIES: 2-axle (4x4) SA rail travel device for rear-axle driven trucks, can be changed to 1,000 mm I 1,435 mm. Rail travel speed 30 km/h Track cleaning structure: suction nozzles for picking up objects of various sizes and weights, from cigarette butts to champagne bottles. The objects are picked up without removing ballast from the track bed. - Dirt collection container (approx. 8.5 m²) - Rake for loosening stuck-on dirt (pneumatic) - Hand suction hose device - Dry filter system - Fan - Fire monitoring and extinguishing system (dirt container) EQUIPMENT: All control elements of the rail travel device in the driver's cab - Position control of the rail chassis - Lighting of the rail chassis - Hand hydraulic pump - Earthing device - Earthing cable and rail clamp - 4-way sand spreading system - Signal light and warning system (DB + BOStrab, bell, compressed air horn M 75l660 UIC) - 4-way work lights - Coupling device - Video surveillance system "ORLACO", Sale only to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, functionality: unexamined, machine/vehicle number: ML-348, Used Hyco ML-348 Vacuum Diaphragm Pump Gksdpfxow Evhzj Ag Tea Model: ML-348-D37-SA Type: p-227/1 | 207/1 | p-173/2 Voltage: 230-400, 50/60 Hz Multiple units in stock.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Gksdpoy Ecuzefx Ag Tsa Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Gjdjy Ecu Ujpfx Ag Tjka Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Plant from spiral freezer. Gsdpfxsvvm Afe Ag Teka

Condition: excellent (used), Table top vertical vac packer. Has come from test kitchen, ideal for packs which can’t be laid down. Gkodpfx Aget R Sm Ie Tea

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Gjdpfx Agjx N Nlzs Tska

Condition: good (used), Laska KU 45 VKAB bowl cutter with cooking and vacuum options. Has come from a pilot plant in a major food company so has not been used very much. Complete contents of pilot plant also available. Gsdpjx Ilqdjfx Ag Teka

Condition: excellent (used), Year of construction: 2004, Lovely Busch RA 0630 vacuum pump which has just come out of a closed factory. Mounted on its own stainless platform and has a control panel fitted. Looks much newer than 2004. Gedpfxei Exf Ao Ag Teka

Condition: good (used), Year of construction: 2008, Seydelmann K754 vacuum and cooking bowl cutter direct from closed pate factory. Bought new in 2008. We can demonstrate the machine running. Godpfoqgfamex Ag Tska

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Gjdpfsptbi Dox Ag Tjka

Condition: excellent (used), As new Vemag HP3 vacuum filler. Has been used for filling tiny chillies and pieces of pasta with cream cheese. Multi depositing system also available with it - as are the entire factory contents. Was last used in March 2026. Gkjdpfx Asyw U Dljg Tja

Condition: good (used), Rotary pouch filler vacuum sealer. Was packing long life retorted meals in pouches for the armed forces. Gjdeyh Rczopfx Ag Tska

Condition: excellent (used), Gernal vacuum tumbler. 2,000 litres, fully programmable. Immaculate condition. Gjdpfex R N Uljx Ag Tjka

Condition: excellent (used), HP30E with loader. Godpjym T Nqofx Ag Teka

Condition: good (used), 400 litre vacuum tumbler in nice condition. Digital controls. Gsdpfx Agoxxd Hcs Tska

Condition: used, fuel type: electric, color: yellow, fuel: electricity, Empty weight: 1.400 kg Dimensions (LxBxH): 193 x 130 x 155 cm - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive: Electric - Working width: 1200mm - Type: Scrubbing machine Gkedpfx Aozlihxeg Tja - Battery information: - └ Brand/Type: 7 HPZS 630 - └ Battery year of construction: 2010 - └ Capacity: 630Ah - └ Battery voltage: 36V - Transport dimensions: 1930mm x 1300mm x 1550mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz Gedpfx Agozt Srie Tska * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: like new (used), Year of construction: 2025, Brand new MV600 vacuum tumblers available for immediate sale. Three available at the moment. Perfect machines for marinating meats, barbecue products, meat free products and mixing cereals, muesli etc. We also have smaller MV300 units in stock. Gksdpoxvt Ikefx Ag Tsa

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Gkodpfx Ajuqckkeg Tsa Serial: 2268 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Serial: 2266 Gkedeuqckdopfx Ag Tea 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. Gsdoziukyjpfx Ag Tska The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.