Used Universal Hardness Tester for sale (5,413)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Rotating viewing window Rcsdpj Aaz Nnjfx Akioh Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Service Agent (Celeos) Messenger (Celos)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Rcodpfxsz Diq Ue Akieh Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Rodpfxevvi I Ro Akioch

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Rsdpfx Akevvi Nzeioch

Condition: used, Year of construction: 2002, x-travel 3000 mm y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm control TNC 430 B Rjdszrpnrepfx Akiech spindle turning speed range 60 - 3600 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 28 kW total power requirement 48 kW weight of the machine ca. 47 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.

Condition: used, Year of construction: 2013, functionality: fully functional, POSmill H800U – 5-Axis CNC Machining Center Year of manufacture: 2013 Manufacturer: POSmill Model: H800U Machine number: 20130408 Control system: Heidenhain iTNC 530 Technical data Rcsde Afz S Tjpfx Akish - Travel range X-axis: 700 mm - Travel range Y-axis: 820 mm - Travel range Z-axis: 600 mm - Number of axes: 5 - NC rotary table: Ø 800 mm - A/C axes: Kessler torque drive - Swivel range A-axis: ±120° - Maximum spindle speed: 18,000 rpm - Tool holder: HSK-A63 - Tool magazine: 96 tool positions - Internal coolant (IKZ): 80 bar - Measuring systems: Direct absolute measuring systems in all axes, with air purge Equipment - Heidenhain handwheel HR 410 - Kessler A/C axes with torque drive - NC rotary table Ø 800 mm - Internal coolant 80 bar - Paper band filter system - Coolant gun - External cooling of the milling head via nozzle ring - Compressed air via nozzle ring and spindle center - Heidenhain 3D probe - BLUM laser for tool measurement - Automatic cabinet roof - Operating mode 4 - Signal light - Bed flushing - Coolant temperature control Operating hours - Control system switched on: 40,822 h - Machine switched on: 40,073 h - Program run: 20,017 h - Spindle S1: 17,354 h Condition / Notes The machine has two tool magazine chains with a total of 96 tool positions. One of the two magazine chains is defective. The further technical condition and functionality must be checked during an inspection. Inspection possible by arrangement. All information is without guarantee. Subject to prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 274 mm, spindle bore: 82 mm, turning diameter: 460 mm, turning length: 1,500 mm, total length: 2,720 mm, total width: 1,040 mm, total height: 1,340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 2,080 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1500 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 82 mm spindle bore, 5.5 kW main motor and 1500 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1500 mm, spindle bore 82 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Swing over cross slide: 274 mm Swing in gap: 690 mm Maximum turning length: 1500 mm Bed width: 300 mm Spindle nose: D8 Spindle bore: 82 mm Spindle taper: Ø90 (1:20) Spindle speed: 25 – 2000 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Top slide travel: 120 mm Cross slide travel: 290 mm Main motor power: 5.5 kW Coolant pump power: 0.09 kW Dimensions (L × W × H): 2720 × 1040 × 1340 mm Weight: 2080 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Rjde Af Uncepfx Akisch Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Rcodpfx Akjxfkm Aoioh Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Offered: Universal milling machine. Equipped with: Vertical milling head, overarm, machine table, manual adjustment and clamping elements and vertical machine guideway with bellows cover. Inspection possible by arrangement. Rcodps Agwqzofx Akieh

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD Rcjdsy Nmg Aspfx Akioh RANGE OF TOOLING

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request. Rodpfozxhggsx Akiech

Condition: excellent (used), max. grinding diameter 175 mm Rcodpozxh Tmefx Akish

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! Rcedpfjzxiv Nsx Akish You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine number: 70 Travel distances: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm (horizontal) Z-axis: 990 mm (vertical) NC swivel head, continuously adjustable: +/- 105 degrees Tool magazine: 40 positions Tool holder: SK50 Motor spindle: 8,000 rpm / 68 kW Accessories: - Chip conveyor - Prepared for partition wall - Electronic handwheel - Internal coolant supply 20 bar (paper band filter 450 l) - Complete enclosure for the working area with roof - Flushing gun - Oil central lubrication system Rcsdpjzxp A Njfx Akieh - Oil mist extraction system - 3D measuring probe with wireless transmission (Renishaw RMP60)

Condition: used, Year of construction: 2014, functionality: fully functional, Milling swivel head: - with torque motor and hydraulic clamping - Swivel range +30/-120°, stepless - 14,000 RPM - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with air blow-out function Integrated rotary table: - with torque motor and hydraulic clamping - Ø 610 mm - Extended clamping area 1,100 x 610 mm General: - 40-position tool changer with dual-arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light Control system: Heidenhain iTnc 530 SmarT.NC HSCI - 15.1'' TFT screen - Ethernet interface - 2x USB port - SmarT.NC-guided programming - Plain text programming - Short sentence processing time - Create a new program while another is being processed - Proven Heidenhain machining cycles - CE certification Options: - Internal cooling system (IKZ), 40 bar, including band filter system Rcjdpfx Aszzp E Nskioh - Heidenhain TS640 for DIN SK40 workpiece probing system with infrared transmission - Heidenhain software option 40: DCM Dynamic Collision Monitoring for iTNC 530 - Heidenhain KinematicsOpt incl. Heidenhain calibration sphere KKH 250

Condition: used, Year of construction: 2010, Milling machine, manufacturer Knuth, model UFM 3 Plus. Digital display, numerous accessories included. Rodpfez Aff Uox Akiech

Condition: excellent (used), Year of construction: 2008, Control system: Heidenhain MillPlus IT Travel ranges X/Y/Z: 1250 x 710 x 710 mm Spindle speed: 12,000 min-1 Tool magazine for 60 tools, SK 40 Rcjdpsz Albvjfx Akieh NC rotary table integrated into a fixed table, diameter 800 mm / 1500 mm x 800 mm Controlled NC swivel milling head (B-axis) including hydraulic clamping Swivel range -120/+30° Measuring probe, infrared, manufacturer: Heidenhain TS 649 3D quickSET expansion package Production package 40 bar/23 l/min (theoretical pump output), tank 600 l, paper band filter, rotating viewing window Chip conveyor

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Rcedpfxezz Hq Ao Akish Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Rodpozzmirjfx Akioch Tool holder: HSK 63 Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l - Internal cooling lubricant system, 25 bar - Chip conveyor - 1x flushing gun - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine Rjdpfx Akszyy Rmjijch - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Rcjdpfxozrt Ipo Akioh Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m Rcsdpfx Aszuxx Sskioh 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Rcedpfszuma Rex Akijh Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: good (used), Year of construction: 2006, For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board 1 VP board 1 VP Expander board 1 VXI-MXI-2 1 High voltage PRISM board 10 CC2a master and expander boards Maintenance documentation and CE declaration available. Rcedpfezh Txtox Akish

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Redpfoytpy Esx Akiech