Used Universal Drilling Machine for sale (66,066)

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). Ncedpfxsywtxbe Agwjp We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Nedpjyghh Usfx Agwjcp

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Nodpfowtdmujx Agwecp Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V

Year of construction: 1983, condition: good (used), KOLB Radial drilling machine NKR 42 machine no.: 10073 spindle diameter 70 mm spindle stroke 325 mm Ncsdpelvtg Nsfx Agwjp throat 1250 mm rpm max 1700 clamping table 2500x4500 mm,10 T-slots Dimensions LxWxH 25000x4500x29000 mm weight approx. 10 to accessories: Steel cabinet with clamping tools Machine vice

Condition: good (used), KOLB radial drilling machine NKR 43 spindle diameter 80 mm spindle stroke 325 mm Projection 1250 mm 5.5 KW Nedjf Ddqgopfx Agwjcp rpm 50 - 2100 Angle bracket LxWxH 610x500x530 mm Dimensions LxWxH 2420x920x2850 mm Weight approx. 3,5 to

Condition: ready for operation (used), machine/vehicle number: 2522, See pictures for condition and details Ncodstxtfvspfx Agwop

Condition: not inspected (used), machine/vehicle number: 42 255 016, functionality: unexamined, table width: 260 mm, table length: 340 mm, overall weight: 400 kg, spindle speed (max.): 4,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Table dimensions: 340 x 260 mm (with two T-slots) Spindle speed: 80 to 4,000 rpm Ncedpfx Agsyr Iwaewep MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 2,100 mm Weight: 400 kg External reference: 52

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8906, table width: 520 mm, table length: 770 mm, drilling depth: 160 mm, rotational speed (max.): 2,800 rpm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires collection within the period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Nedpfx Aeyr Iqyogwjcp Spindle speed: 80-2,800 rpm Drilling depth: 160 mm Table dimensions: 770 x 520 mm Number of T-slots: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 2,100 mm Weight: 1,500 kg External reference: 50

Condition: not inspected (used), Year of construction: 1989, machine/vehicle number: 35232052, functionality: unexamined, rotational speed (max.): 2,500 rpm, rotational speed (min.): 160 rpm, table width: 320 mm, table length: 400 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Spindle speed: 160 - 2,500 rpm Table dimensions: 400 x 320 mm Njdeyr Inropfx Agwecp MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 3.1 A Power connection: 1.1 kW Dimensions & weight Dimensions (L x W x H): 600 x 500 x 1,800 mm Machine weight: 400 kg EQUIPMENT Thread cutting head by manufacturer EDALCO External reference: Lot 14

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, travel distance W-axis: 350 mm, rotational speed (max.): 300 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires collection within the specified period: 04.05.26 to 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions (L x W x H): 840 x 460 x 350 mm Maximum workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Nsdpfeyr H Ttjx Agwocp Rotational speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Machine weight: 2,000 kg External reference: Lot 12

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. Nedpoyr Hukjfx Agwjcp MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Weight: 70 kg External reference: 31

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Njdpfx Aeyk S Hpegwjcp Year of manufacture: 2001

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m Ncedpfx Ajvvnfujgwop DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Ncedpsurk Exsfx Agwep Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: used, Year of construction: 1993, Technical details: x-travel: 7000 mm y-travel: 1200 mm z-travel: 1300 mm rapid travel x/y/z: 10 m/min table-size: 8.000 x 1.300 mm table load: max. 4 t/qm universal head: 5x90° plus manuell 1° tool taper: SK 50 Ncodpfx Agsyvfyyjwsp milling head speed: 20 - 2.000 1/min power capacity: 30 kW max. torque on the spindle: Getriebe 2 stufig , 750 Nm control: HEIDENHAIN TNC 360 total power requirement: 50 KW dimensions of the machine ca.: 9,0 x 3,8 x 4,6 m weight of the machine ca.: 25,0 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only Nsdpfoykca Tex Agwocp - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Very good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz Ncjdpfxjdzp S Ns Agwsp - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Ncodpfxoukf Nce Agwsp very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 Nsdpfx Asyu Snzogwecp >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,347 h, functionality: fully functional, machine/vehicle number: 190347, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 3,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,500 mm Table size (2x): 2,000 x 2,000 mm Table load capacity: 3 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Control: Heidenhain TNC 430 B digital Number of controlled axes: 6 Milling drive: 25 kW Total power requirement: 50 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 26 t Program run time: 22,347 h EQUIPMENT Integrated coolant supply (IKZ) 40-position automatic tool changer Chip conveyor Ncodsyu Rr Eopfx Agwsp High-speed spindle (30,000 rpm) 2 pallets

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,616 h, functionality: fully functional, machine/vehicle number: 184640, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, table load: 5,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,400 mm Travel Z-axis: 1,500 mm Table size: 3,000 x 1,400 mm Table load capacity: 5 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Control: Heidenhain TNC 430 B digital Milling drive power: 22 kW Total power requirement: 50 kW Ncsdpfx Agjyu Rquswjp Dimensions & Weight Footprint: approx. 6.5 x 3 x 3 m Machine weight: approx. 22 t Operating Data Program run time: 25,616 h Machine on-time: 53,291 h Control on-time: 55,029 h EQUIPMENT 20-position automatic tool changer Milling head can be automatically swiveled and rotated in 1.5° increments Chip conveyor Adaptable high-speed spindle (30,000 rpm) Mist coolant system

Condition: not inspected (used), Year of construction: 1986, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 6,000 kg, Heidenhain TNC 426 900x700 mm universal table Travel: 850x700x600 mm Ncodpfxjyt Nxuo Agwjp Max spindle speed: 6000 rpm Weight: 6000 kg

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation Ncodpfju R S Exsx Agwop -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 - new exhibition machine -

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM Nedpfju R Tftox Agwjcp - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement. Nedpox Hn A Tsfx Agwocp