Used Twin Shaft Shredder for sale (8,451)

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Equipment, detailed description: see documents. Chsdpozd Srdjfx Ap Djd

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, Hydraulic drive, HÄGGLUNDS hydraulic unit, SIEMENS electric motor 132 kW, Cutting chamber approx. 2800 x 1300 mm, shaft length: approx. 2400 mm, feed hopper 4100 mm x 2700 mm, base/frame divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm, Inspection and test run possible by appointment. Cjdjv Hr Nxepfx Ap Dehd

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts Csdpszdf Ruefx Ap Dohd - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, empty load weight: 3,500 kg, working width: 1,400 mm, filling opening length: 1,400 mm, filling opening width: 700 mm, Untha 40 shredder This slow-speed shredder is ideal for shredding large items such as pallets, consumer electronics, televisions, solar panels, and bumpers. Power: 2 x 18.5 kW Electrical cabinet: Siemens Csdpfszmzgpox Ap Dohd Chamber dimensions: 1400 x 700 mm Loading hopper included. Weight: approx. 3500 kg The machine is in perfect working order. Price available upon request. More photos and a video of the machine in operation can be provided upon request. Testing is possible. More information is available by phone.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants ✅ Complete line with conveyor belt and discharge auger ✅ PLC-controlled operation ✅ CE-compliant machine Csdpfsz Dibaex Ap Dohd

Condition: good (used), Year of construction: 2021, operating hours: 7,000 h, functionality: fully functional, overall weight: 46,000 kg, rotational speed (max.): 32 rpm, rotational speed (min.): 18 rpm, power: 566.33 kW (769.99 HP), Equipment: rotational speed infinitely variable, Lindner Urraco 95 DK – Year of manufacture 2021 – Well-maintained condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,000 operating hours. The shredder is in a well-maintained and operational condition. The exact condition can be seen in the pictures. The machine is equipped with the DK4 package and therefore has a reinforced gearbox and a reinforced shredder frame. ⸻ Equipment / Scope of supply Optionally available at an extra charge: * Individual rotor configurations for different materials, e.g. waste wood (A1–A4), household and commercial waste, roots, aluminum, and scrap. * Belt magnet for separating ferrous metals. * Rubber track system to protect the ground when used on sensitive surfaces such as asphalt and concrete. All of the mentioned equipment options are optional and can be purchased additionally at an extra charge, depending on your needs. They are not included in the basic price. DK4 package with reinforced gearbox and reinforced shredder frame. ⸻ Technical data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,000 Engine power: approx. 566 kW (approx. 770 hp) Chsdpfo Afl Nijx Ap Ded Emission standard: Stage V / Tier 4f (depending on the model) Rotor length: approx. 2,500 mm Rotor diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Track-type, hydraulically driven Application areas: Scrap, commercial waste, bulky waste, mixed waste, wood, recyclable materials ⸻ Condition: Well-maintained machine Fully functional technically Sale is made as inspected on site Additional information / Maintenance history The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work has therefore been carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, incompleteness or changes in the information. The sale is made exclusively subject to prior sale.

Year of construction: 2025, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM Codpfoyvhp Sox Ap Dehd MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE Csdpfx Aoz Ayayop Dehd For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Cjdpfx Ajwxmb Esp Dshd Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: used, Year of construction: 2007, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: W0925621972D07090, overall weight: 18,000 kg, We are selling our Doppstadt Buffalo DW2060. This machine is one of the most reliable Doppstadt models. It is in used condition but is in good working order and ready for use. Codps Adnz Sjfx Ap Dehd It can be demonstrated and tested on-site at our facility. It can be transported on the road on its axle with a suitable towing vehicle. This is an exceptionally powerful machine and is available immediately.

Year of construction: 2009, condition: good (used), The device is in working order, was removed from a production line, and is stored in a heated warehouse. Before being removed, it was used for mixing dough. It could potentially be used in other branches of the food industry. Power supply: 400V Capacity: 100 kg/batch Csdpfs Agf S Nox Ap Dehd

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Cjdpfoytdkfjx Ap Dshd Immediately ready for use.

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Codpfx Apexx Tfze Dshd Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: new, Year of construction: 2026, functionality: fully functional, rotor length: 900 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits ASCO DS 600 and DS 900 double-shaft shredders deliver reliable shredding performance for recycling, waste management, municipalities, and construction logistics. Designed for wood, green waste, plastics, foils, pallets, packaging, and production residues, they ensure high throughput, low maintenance, and efficient material reduction-even with heavy or resistant waste. Key Features: • Compact yet powerful double-shaft shredders for diverse materials • Robust, durable construction with maintenance-friendly design • Counter-rotating shafts for secure and controlled shredding • Large filling opening (DS 900) for bulky and heavy materials Chjdpfxow Dc S Ds Ap Dod • Intuitive control system with automatic reversing to prevent blockages Tech Highlights Rotor Ø 200-350 mm · Rotor L 900 mm · Rotor n 10-60 rpm · Power 8-60 kW

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Chsdpfjzgblrox Ap Ded Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, rotor diameter: 500 mm, rotor length: 2,962 mm, V(V/N)Z300 Codpfxs Ah Hgaj Ap Dohd

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Chsdpfoy D Nicsx Ap Ded Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,580 mm, total width: 2,320 mm, total height: 2,600 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits The ASCO DS 600 is the ideal double-shaft shredder for recycling companies, municipalities, construction logistics, and industrial waste management. It reliably shreds wood, green waste, plastics, foils, pallets, and packaging with compact efficiency, low maintenance, and flexible stationary or mobile operation. Key Features: • Robust counter-rotating shafts for powerful shredding • Versatile material handling across industries • Space-saving compact design • Easy operation with automatic reversing • Fast, user-friendly maintenance Tech Highlights: W 2.32 m · L 1.58 m · H 2.60 m · Cutter Ø 200–350 mm · Speed n 10-60 rpm · Power 8-60 kW · Weight 1870–2590 kg · Infeed 0.95 × 1.18 m · Discharge 0.60 × 0.60 m Chodpsw Afvpefx Ap Dsd

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Chjdex Td Npepfx Ap Dsd Please feel free to contact us – we are happy to advise you.

Condition: used, Year of construction: 2021, operating hours: 4,119 h, functionality: fully functional, machine/vehicle number: 7187, overall weight: 20,000 kg, year of last overhaul: 2026, fuel type: diesel, We are offering this used Lindner crusher, model Urraco 75D, manufactured in 2020, for sale. Cedpfx Apjzc Izms Djhd The installed grinding unit has been completely refurbished. An additional grinding unit (unrefurbished) is included in the price. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Chedpfxez Hw Nqj Ap Ded Diesel engine: 350 hp Discharge height of discharge conveyor: > 4.50 m

Condition: excellent (used), Year of construction: 2022, operating hours: 1,850 h, functionality: fully functional, machine/vehicle number: 220, total length: 13,000 mm, total width: 5,700 mm, total height: 4,200 mm, overall weight: 37,000 kg, power: 404.52 kW (549.99 HP), TITAN 950 ARJES, in very good condition and with very few hours of use. Equipped with a shredding rotor and a magnetic pulley on the cross conveyor, this shredder completely removes ferrous materials. Chsdpfx Apsz D Dqce Djd

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Diesel engine: 551 HP Folding discharge conveyor Overbelt magnet (neodymium) Cedpfx Aou R Uaxjp Djhd Radio remote control Detailed description: see pdf-file

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks Chodpezhu Atefx Ap Djd

Condition: used, Year of construction: 2014, two identical machines available, were in production until April 2025. Can be supplied with or without loading hoist for 200 litre tote bins. Machines were supplied new by Multivac UK and have come from a bakery where they were mixing fillings for pasties and sausage rolls. Chjdswd Un Repfx Ap Dsd