Used Tubesca Scale for sale (2,263)

Condition: used, Year of construction: 1997, Cutting length 3060mm Max. cutting capacity 6mm Manual adjustment of the cutting gap 750mm rear stop Fold-up finger guard Support arms with scale Additional blade Djdpfx Acj Aivp Royjwd

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Dsdsxw N Sbjpfx Acyswd Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer Dwodpfx Asyyp Hyecyed The unit is in full working condition and is ready for immediate use The Sartorius Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: used, BÜHLER Laboratory Stirred Ball Mill / Wet Grinding System BÜHLER FPML2 Premium Universal laboratory stirred ball mill for process development and product optimization For sale is a used laboratory stirred ball mill from the manufacturer Bühler AG, Switzerland. The PML 2 is a modular laboratory stirred ball mill for the research, development, and optimization of wet grinding and dispersion processes. It is suitable for low to medium viscosity products, as well as for the development and scaling up of industrial production processes. Technical Data Manufacturer: Bühler AG Type: FPML2 Premium Model: PML 2 Machine No.: 10425639 Year of Construction: 2007 Power Connection: 400 V Frequency: 50 Hz Connection: 3+N+PE Rated Current: 16 A Dsdszhkcpepfx Acyewd Active Grinding Chamber Volume: 0.2 - 1.2 dm³ Volume of Inert Liquid Tank: 2.4 dm³ Inert Liquid Pressure: max. 7 bar Motor Power: 2.2 kW Rated Motor Speed: 3,000 rpm Rotor Speed: 500 - 4,500 rpm Machine Dimensions: Width: 617 mm Depth: 458 mm Height: 862 mm Cooling Water Inlet: G 1/2" Cooling Water Outlet: G 1/2" Compressed Air Connection: G 1/4" Machine Weight: approx. 150 kg Hose Pump Weight: approx. 30 kg Gear Pump Weight: approx. 25 kg Laboratory Hose Pump Weight: approx. 8 kg Attachment Container Weight: approx. 5 kg Vat Weight: approx. 1.5 kg Application Areas Automotive OEM & Refinish Paints Anti-Corrosion Paints Industrial Paints Display and Electronics Materials Color Filter Technologies Metal Pastes Ceramic Pastes Glass Pastes Inkjet Inks Liquid Printing Inks Liquid Toners Agrochemicals Pigment Concentrates TiO₂ Dispersions Adhesives and Sealants Equipment Modular Laboratory Stirred Ball Mill Integrated Grinding Chamber Cooling Connections Control Unit Industrial Design Accessories according to scope of delivery and images Condition Used Optical condition according to images Signs of wear and tear due to age and use Scope of delivery as shown in the images Scope of Delivery 1x Bühler FPML2 Premium 1x Laboratory Stirred Ball Mill PML 2 Existing accessories according to images Important Note: A complete technical functional test has not been carried out. Sale according to condition and scope of delivery as shown in the images. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Changes and errors in the technical data and information are reserved. We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, machine/vehicle number: D222E02722T, Year of construction: 2019, operating hours: 14,970 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 261 kW (354.86 HP), empty load weight: 83,700 kg, drive type: Diesel, Full container reach stacker Chassis number: D222E02722T Dodpfszighwsx Acyewd Mast type: Telescopic Transmission: Dana TE32 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 40 - 60% Side shifter, Full cab, air conditioning, joystick, Piggyback pile slope power dumping camera, central lubrication, movable cabin, SOLAS scale.

Condition: used, EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating hours: 6735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform The Multibox is a typical accessory for powder handling in EOS systems. It is used for the transport and temporary storage of the material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Control terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-cooled – High-pressure pump Technical data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Djdpfx Acjzimhqoyjwd Connection: NPT version ("AN") Supply: 200–230 V AC, 1-phase Refrigerant: R407C Weight: approx. 1110 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-AXIS CNC MACHINING CENTER WEMAS VZG 72-5A (YEAR OF MANUFACTURE 2019) Travel ranges: X = 720 mm, Y = 600 mm, Z = 520 mm. 5-axis milling and drilling. Multi-sided machining in conjunction with a rotary table, ø 720 mm. 60-position tool changer, automatic workpiece measuring probe. Glass scales in all axes. SK 40 with 12,000 rpm and 80 bar internal coolant. Dwsdpfez Ri Stjx Acyod

Condition: used, This listing is for a IKA RCT CL S2 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. Dedpfx Asxxz Udscyswd The IKA RCT CL S2 Heating Magnetic Stirrer is a reliable laboratory device designed for efficient stirring and heating of various substances. Part of the IKA RCT series, it combines precision, safety, and durability to meet the demands of modern laboratories. Key Features: Precise Temperature Control: Offers a temperature setting range of 0 - 310°C with a resolution of 1 K, ensuring faster and accurate heating of the medium. Wide Speed Range: Adjustable speed from 50 to 1500 rpm, with a setting accuracy of 10 rpm, making it versatile for different stirring needs. Safety Features: Equipped with a hot top indicator, digital error code display, and an adjustable safety circuit for heating plate temperatures (50 - 360°C) to prevent overheating and ensure safe operation. Efficient Magnetic Stirring: Utilizes a strong motor, capable of stirring volumes up to 20 L (H₂O), suitable for large-scale or intensive laboratory tasks. Durable Heating Plate: Constructed from aluminum alloy, the heating plate delivers optimal and homogeneous heat transfer for consistent results. Advanced Connectivity: Includes USB and RS232 interfaces for easy control and documentation of test parameters using a PC, and compatibility with labworldsoft laboratory software. Technical Specifications: Dimensions: 160 x 85 x 270 mm (W x H x D) Weight: 7.29 pounds Wattage: 600 watts Material: Aluminum alloy Brand: IKA Manufacturer: IKA WORKS, INC

Condition: used, This listing is for a Analytical 200g Weight. Dedpfxoxx Acvs Acyowd The unit is in full working condition and is ready for immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. Dwodpexv Aavjfx Acyed This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance

Condition: used, This listing is for Akta Process sample pump. The unit is in full working condition and ready for immediate use. High-performance liquid chromatography sample automation pump optimized for scaling up biopharmaceutical manufacturing and reliable laboratory fluid delivery. [[1](?selectedProduct=28956095), [2](), [3]()] Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Dwsdpfx Asxhga Rscyed Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Condition: Direct-from-Bench (Decontaminated/Original) • Source Pedigree: Biotech / Research Facility

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. Djdpoxl Dy Nsfx Acyewd The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately - Dwedpfx Acsvk Sfbsyjd

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Dodpfxocnxrcs Acyswd Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal Dwsdpocnz Rvjfx Acyjd 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Dedpfsw Tcncex Acyewd Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: refurbished (used), Testing device with test forces of 1-250 kg - Vickers HV1 - HV120 Dwjdpsc Nl Ecofx Acyjd - Brinell 15.625 / 31.25 / 62.5 / 187.5 / 250 kg - Rockwell HRA / HRB / HRC Scope of delivery: - Hardness testing device - LED lighting system - Objectives 70X / 140X - Scales 70X / 140X - Diamond indenter 136° Vickers - Diamond cone 120° Rockwell - Ball holder with ball Ø2.5mm Brinell - Test table, flat, Ø80mm - Test table, flat, Ø235mm - Prism support Ø80mm - Power cable - Operating manual with conversion tables Optional: - BVMS3 software - Delivery / Installation / Calibration & Training

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock Dedpok Dpp Sjfx Acyowd - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2026, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 400 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, The highest precision of this press brake guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding machine 3.14m/0.8mm Dwsdob Hqa Nepfx Acyod Technical specifications: - maximum working width: 3140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The cutter (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: PLEASE ASK Cash on delivery and bank transfer in advance Delivery within 1 week from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2026, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, overall weight: 540 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg Dwedpsci R Exefx Acyod - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier Dedpo Ah Adisfx Acyswd C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: used, mileage: 289,276 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 530 SC PXP Desert Yellow Headlight beam pattern for right-hand traffic Electrical trailer connection 24V/15-pole, cable: 15-pole + EBS Front mirror Left-hand drive OBD, Euro VI Step E Auxiliary heater with waste heat recovery and timer Scale speedometer display in km/h Automated gearbox with manual override – full version Basic immobilizer Kingpin diameter 2 inches Rear lights with incandescent bulbs Stabilink rear axle suspension Halogen headlights Max. permissible gross vehicle weight of tractor 50,000 kg, class 3 Traction control system (TCS) EAS unit on the right-hand side Driven rear axle with disc brakes Rear fender Splash guard Front underrun protection Convex main mirror Pneumatic connection for trailer, swivel coupling Walkway with step, standard Exhaust pipe, horizontal, low Body connector on the front of the cab Cold foam mattress for lower bunk Walkway step on the left Work light, LED Automated gearbox, TraXon, 12 gears Interior trim color: Dark Sand DAF Connect Co-driver seat: Basic Fuel tank, left Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load capacity index 149 Standard maintenance interval Luxury speaker system with 6 speakers Cab, interior trim Delta black Door panel: loosely woven fabric Pleasant-to-grip steering wheel, color black Electronic Stability Control (VSC) Armrest, driver's seat Preparation for toll system Fog lights Lane change warning system Power windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connector Driver Performance Assistant Storage compartment for trailer connections H3296 Desert Yellow Central locking Sealing, lower part, cab structure and fender on driver's side Antennas: DAB-ready, radio, 2x mobile phone, GNSS extra: CB Sun visor, external, green, translucent Cab air-suspended Driven rear axle(s): 315/80 R22.5 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Rear warning system 12-speed TraXon gearbox 12TX2620 DD, 16.69-1.00 Aluminum fuel tank 430 l, height 620 mm ZF Intarder Aluminum wheels, Alcoa Dura-Bright Auxiliary power supply: Standard + 2x 40 A Digital tachograph, VDO 1C Vertical battery box, left, no spare wheel holder Auxiliary engine, rear, 13 hp, continuous, pump drive KA saddle plate dimension 470 mm Preparation for compressed air system Front axle(s): 385/65R22.5 Emission standard Euro 6 Air intake, top with cyclone filter Space Cab - cab Rear axle ratio 2.69 First gearbox auxiliary drive NH/4c-R-32/25 Curtains with partition curtain Headlight design and bumper: cab color Cool box or refrigerator Dust protection shield Rear: 13.00 t, air suspension, SR1347 Speed limiter setting 90 km/h Automatic cab climate control ECO mode AdBlue® tank 75 l, left chassis side Wheelbase 3.60 m / rear overhang 0.75 m Truck phone Chassis preparation with hydraulic front axle from PXP Front: 8.00 t, parabolic, 187N ECAS remote control with extended functions Preparation for navigation system Driver's seat: Luxury Air Analog body signals and warnings Dsdpfx Acozahcxsyewd Axle load monitoring Battery energy monitoring Aluminum compressed air tank Safety net on lower bunk CAN J1939 functions in the body connector Lower bunk with drawer, 65 liters PAUL PXP (GER) for CF or XF Loading camera, FHS roof Wind deflectors, side windows 2 rotating beacons on lamp bar from Truckline 24V socket on chassis (NATO socket)

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC407, overall weight: 13,400 kg, spindle motor power: 18,500 W, spindle speed (max.): 1,300 rpm, table length: 1,100 mm, table load: 3,000 kg, table width: 1,000 mm, number of axes: 4, This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996. It features a longitudinal travel of 1250 mm, transverse feed of 1000 mm, and vertical travel of 1100 mm. The machine has a robust table size of 1000 x 1100 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details. • Spindle diameter: 100 mm • Table size: 1000 x 1100 mm • Machine was rebuilt in 2018, the scope:- parts intended for grinding: machine bed, foundation slide, transverse slide, column, pallet,- inspection of gears, shafts, replacement of faulty and worn parts,- replacement of all bearings,- New Spindle- replacement of tubular shaft bushings,- Replacement of the bearing of the bearing ball screw- Belt replacement.- repair of the rope line that holds the counterweights,- replacement of the strap,- checking the hydraulic system,- Eliminate oil leaks- checking the oil system, cleaning, replacing faulty elements,- Grooving and processing of sliding surfaces with Diamant Moglice glue (base slide, spindle housingcross table), processing of oil grooves.- New production of conical lamellas,- interior painting,- repairs of covers, Henning protectors,- replacement of wire wipers,- repair of the cooling water system,- replacement of levers, buttons, scales, inscriptions,- grinding and adjusting the slats of mechanical fasteners,- the entire paintwork of the machine is RAL 601 Technical Specification Dwsdpfxe Adtm Hs Acyjd Taper Size ISO 50 Through-spindle Coolant No

Condition: used, Used Machine Features and Technical Specifications: Precision drill press, AC model Stepless electronic speed control from 400 to 4,500 rpm Drilling capacity in steel and gray cast iron: 13/15 mm Drilling depth: 60 mm Drilling depth indicator with mm scale via a quickly adjustable stop ring Drill head height adjustment: floating adjustment via a gas spring Motor: 0.5 kW Dodjzk N N Tspfx Acyewd Dimensions: 120x80x90 Weight: approx. 75 kg Availability: available shortly Location: 63934 Röllbach

Year of construction: 2021, condition: used, Offered is a lightly used edge sander with pneumatic belt tensioning. Operating pressure: 6bar, pressure limit: 7bar, tiltable sanding unit with angle scale, front worktable, additional table at the idler roller, dust extraction connection, compressed air filter regulator with pressure gauge, an operating manual and additional sanding belts included. Inspection possible by arrangement. Dedpfxe Aiu S He Acyowd