Used Tube Grinding Machines for sale (66,312)

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: 513, max. tube-Ø: 6 - 48,3 mm max. bending angle: 0 - 360 ° electrical connection: 400 V, 1,8 kW space needed: 4200 x 1300 x 700 mm Nodpfxsrp Ehye Agwekw weight: ca. 300 kg

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg Nkjdpfx Aoya Ihhegwew dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Nkodpfx Agsw U Nzrewew

Condition: good (used), Year of construction: 2005, operating hours: 374 h, functionality: fully functional, machine/vehicle number: 112434, total length: 7,310 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 4,200 kg, input frequency: 50 Hz, type of input current: three-phase, working height: 80 mm, power: 20 kW (27.19 HP), pressure: 7 bar, Straight line bevelling machine for glass with 7 wheels, serviced in 2025. Minimum glass size: 40 x 40 mm. Speed: 0.5 – 4.1 m/min. Glass thickness: 3 – 20 mm. Bevel angle: 3° – 45°. Maximum bevel width: 50 mm. Power: 20 kW. Excluding water tanks and pump (connected to central system). Nkodpfx Ageyg Dhqowow

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, grinding length: 400 mm, grinding width: 150 mm, JUNG JF 415 Jung JF 415 Surface Grinding Machine with Flanges and Coolant Belt Filter * Table length: 400 mm * Table width: 150 mm * Maximum grinding length: 400 mm * Maximum grinding width: 150 mm * Maximum workpiece weight: 75 kg * Distance spindle to table: 400 mm * Table speed: 1–24 m/min Nsdpfjytfbfox Agwokw * Grinding wheel diameter: 25 mm * Spindle speed: 900 – 4500 rpm * Heidenhain digital readout * Year of manufacture: 1990, machine no.: 1566

Condition: used, Year of construction: 1950, width of the strips 150 mm band length 6680 mm Nkedjua Ivcjpfx Agwow volt 380 V weight 800 kg dimensions of the machine ca. 3,2x1,6x1,75 m Wood surface sanding machine Carriage length: table size 2500 x 800 mm Belt length: 150 x 6680 mm Manual processing table, adjustable Table height adjustable

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 Nodpfx Aoyf E Sujgwokw - Splash guard hood for the above - Tailstock with fine adjustment, MK4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842, incl. grinding mandrels (4 pieces, choice) - HJNZ 42 collet chuck - Oil mist lubricator for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock incl. alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet attachment for Schaublin collets B32 - Set of B32 collets, D: 1.0–30.0 mm, increment 0.5 mm (59 pieces) - Dial indicator stop for table swivel with indicator 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table load relief - Swiveling dressing device for external, face, or internal grinding operations - Set of vibration damping pads - New three-color paint finish (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity The machine is currently being overhauled, sample photos shown!

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 +++ Note: This machine is part of an online surplus sale! +++ Nsdpfx Aex Ahg Ujgwokw

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos +++ Note: This machine is part of an online surplus sale! +++ Nedpfjx Ahivsx Agwskw

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min Nksdpfx Aowgnz Aogwew cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: used, Year of construction: 1976, magnetic clamping plate 1.000 x 600 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nkjdpeywnwljfx Agwow Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Number of working hours 1717 h Nodeywnuqopfx Agwjkw

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Nksdjnxi Uuopfx Agwjw Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Nksdjnxi R Uspfx Agwow Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Nodpfx Aeyglhfogwekw Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: good (used), center height: 200 mm, grinding length: 1,600 mm, grinding wheel diameter: 450 mm, grinding diameter: 400 mm, Mostana Horizontal Spindle Grinder Model: 3L722B-80 Capacity: 1600 x 400 x 400mm Long Travel: 1780mm Cross Travel: 430mm VerticalTravel: 415mm Grinding Wheel: 450 x 80 x 203mm Spindle Motor: 11 KW Machine With: Rapid Traverse Vertical Incremental Downfeed Magnetic Chuck: 1575 x 400mm Coolant Clarifier Digital Readout Dimensions: 5940 x 2660 x 2600mm High Nkedpfx Ageyglc Aowow Weight: 8000 KGS

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm voltage 380 V / 50 Hz Nedpjyw Tkkofx Agwjkw motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm Njdpfx Agowzmqrjwskw boring diameter 100-500 mm control Sinumerik 840D

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Nodpfsx H A Rxjx Agwjkw Application Types Cutting

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Nkedoyudtpspfx Agwew Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: used, grinding diameter 250 mm Nsdpfoxzuylox Agwokw grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of Nsdpfxoxmk Eus Agwskw delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Nedpfoxq R Haex Agwjkw subject to prior sale!

Condition: used, Year of construction: 1988, grinding diameter 250 mm grinding length 600 mm max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Njdpfx Ageynnvbewskw Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale! Nedpoxc Nypsfx Agwekw