Used Tube Grinding Machines for sale (65,977)

Condition: ready for operation (used), Tubebender equipped with 2 different tools for bending profiles for guide wheels of sectional doors. Bwjdpfswxzzyex Adxow CBM rollforming line for making sandwhich panels for sectional doors click here Manni / Cannon PU press click here Rollforming line for making different profiles for installation sectional doors click here Bonnamy tubebender click here

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Bodpspugwijfx Adxjww The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 150950303003, pipe diameter (max.): 42 mm, tube wall thickness (max.): 2 mm, empty load weight: 2,700 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item by 31/10/2025! TECHNICAL DETAILS Working area: - Maximum tube diameter: 30 mm - Wall thickness: up to 2.5 mm Bwodpjxdbu Uofx Adxjw MACHINE DETAILS - Weight: 2,700 kg - Voltage: 380 V - Frequency: 50 Hz EQUIPMENT - Collet holder for accommodating collets up to 40 mm - Collet with extended opening for tube diameters up to 35 mm - Bend angle measuring and correction unit - Safety light barrier Note: The tools shown in the photos are included. Additional features can be found in the order confirmation (photos). According to the functions used, the machine is fully operational. The seller has not tested any unused functions (e.g., second tool level or Q-axis).

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz Bsdpfehrkrwsx Adxsww - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: used, Year of construction: 2012, machine/vehicle number: 202, Fully functional, slightly rusty. I also have a VWM40U for sale. Bsdpfx Adoxp N Nwexeww

Year of construction: 2024, condition: used, Grinding wheel holder:: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm max. width of grinding wheel: 70 mm Grinding wheel bore diameter: 20 mm Bwodpfxolfil Sj Adxjw Speed of the diamond / CBN disc spindle: infinitely variable 100 - 1000 rpm., Radius of the grinding wheel: 0-30 mm Dimensions of the dressing wheel: 180 x 25 x 31.75mm, Speed of rotation of the dressing wheel: 200 - 2000 rpm., Oscillation stroke of the dressing wheel: 0-70 mm Connected load of the motor of the dressing wheel: 2,2 kW Weight approx: 1400 kg Dimensions L x W x H: 1850x2300x2100mm, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure. Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual,

Condition: excellent (used), dimensions of the machine ca. 380 x 200 x 134 mm weight of the machine ca. 24 kg baseplate-clamping range 110 x 70 mm workpiece sizes max. 56 x 70 x 25 mm profile depth max. 15 mm angular adjustment 0-2 ° Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Bwedpfju Twcfox Adxsw Machine dealer with own stock of 1600 m².

Condition: good (used), – Capacity 2" (60.3 mm) Bwodpfjwpm Tvsx Adxsw – Hydraulic – Adjustable stroke – Foot operation – With bending die for 38 mm pipe – 380V

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. Bwsdpfx Adjg Rgt Usxjw 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Bodpfsqy E R Tex Adxeww Without protective grid

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body Bwjdpowvrazsfx Adxsw - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Year of construction: 2024, condition: new, Specifications: Wheel spindle taper: HSK50E (alternatives possible), max diameter diamond wheel: 250 mm, Min diameter diamond wheel: 50 mm, max wheel width: 70 mm, wheel hole diameter: 20, wheel speed: 100 – 1000 RPM (infinitely variable), Wheel motor power: 4 KW wheel cross stroke 200 mm, wheel longitudinal stroke 140 mm, wheel radius: 0 – R30 mm, dressing wheel (SiC) 180x25x32 mm, dressing wheel speed 200 – 2000 RPM, dressing wheel oscillating speed 3400 mm/1 min (infinitely variable), dressing wheel oscillating stroke 0‐70 mm, dressing wheel motor power 2,2 KW, dressing wheel swivelling speed 360° / 1 min (infinitely variable), weight approx. 900 kg, dimensions w x d x h 1165 x 1150 x 1950 cm, connected load (380V – 50 Hz), colour RAL 9003. Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs. Accessories: Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel), Wheel motor strengthened to 4 kW, Dressing wheel motor strengthened to 2,2 kW, 2 Machine lights 12 V, Optical linear scale with digital display counter (0,001 mm) X, Z Axes, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included), High performance swivelling angle reader (0,05°), Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm, Bwsdofpxd Ajpfx Adxsw Stepless oscillation speed, Automatic central lubrication, SIC Wheel dresser manual, Protection cover.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Bodpjwlpt Defx Adxsww Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: new, – Capacity 42 x 3 mm – Hydraulic – Adjustable stroke – Emergency stop – With 3 tool sets 33.7 mm, 26.9 mm, 21.3 mm – Documentation Bedpfxepivd Ao Adxjww – 400V

Condition: new, Ercolina TB 050 T mandrel-less bending machine Simple control for perfect bends We are ERCOLINA dealers - PLEASE SEND US YOUR INQUIRY - or would you like a telephone consultation ? Technical data: Three-phase mandrel-less bending machine up to 60 mm Control: Soft touch control panel in 8 languages Bending radii: R10 to R300 (min. R= 2xD) Max. bending speed: 1,25 / 2,5 rpm Dimensions (W x H x D): 595 x 900 x 363 mm Mobile due to mobile device Weight: 130 kg Output: Hard copper and aluminum : 64 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 3 mm Solid material : 35 mm SCOPE OF DELIVERY: TB050T Bodpfx Asd Tbpqodxeww Standard accessories (a. o. foot switch, instruction manual, 2 hexagon)

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 2009-0030, pipe diameter (max.): 51 mm, pipe length (max.): 4,500 mm, bending angle (max.): 180 °, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Primary application: Production of titanium tubes (2 inch). Tube properties Dimensions: 2" (50.8 × 0.71 mm) Material: Titanium Ti - P99002 (welded tube, not for hydraulic applications) Bending ratio: 1.5 x D (1.0 x D technically feasible) Tube retraction length: 4500 mm Bwodpfxsu Tqple Adxew Bending properties Operation: In one plane or as rotary draw bending of tubes and profiles. Bending angle: max. 180° + springback (with overbending of 20-30° due to springback of the titanium). Axes and control Bending axis CNC axis with bending angle: 0 - 180° + springback Accuracy: ±0.1° Bending speed:

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Bwjdpotmqi Dofx Adxsw The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2024, condition: new, Specifications: Wheel spindle taper: HSK50E, max diameter diamond wheel: 50 - 350 mm, max wheel width: 70 mm, wheel speed: 100 – 1000 RPM (infinitely variable), wheel radius: 0 – R30 mm, dressing wheel (SiC) 180x25x32 mm, dressing wheel speed 200 – 2000 RPM, dressing wheel oscillating stroke 0‐70 mm, dressing wheel motor power 0,75 KW, weight approx. 1520 kg, dimensions w x d x h 1340 x 1300 x 1900 cm, connected load (380V – 50 Hz), colour red / RAL 9003 signal white. Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs. Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic Bwsdpjd S Tbnjfx Adxew include : - PC - Screen : upgrde to 22" - Backlight : upgrade to vertical light

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 172, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Weight: 1 t Bodpfov Nhimjx Adxeww Motor power: 6.5 kW Further information according to the manufacturer - without guarantee Front roller spacing continuously adjustable: 200 - 1000 mm Number of driven rollers: 3 Drive type: Electric motors Maximum speed: 22 rpm Roller height: 300 mm Torque: 1,600 Nm Works on both sides: rolling at the front, bending at the rear Length: 1.6 m Width: 1.3 m Height: 1.4 m Weight: 1.2 t

Year of construction: 2021, condition: new, Graver Grinding Machine Make: HERZOG (AMA) Model: Pregraph U2 Condition: New machine with warranty - for grinding of gravers, pins, punches and round parts - robust, durable construction - versatile application possibilities - motor protection and restart protection accessories: - Extraction tool, through axial adjustment Bodpfx Asgllp Uodxjww of the disc, the previous setting is setting is retained - Machine light - Operating tool - Grinding wheel with flange - Operating instructions

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Bsdou Rf E Eepfx Adxjww Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 110 h, pipe length (max.): 4,000 mm, Free-form bending machine J.Neu GmbH NFB 030S-4000 6-32mm Year of construction: 2020 only approx. 110 operating hours 5 axes CNC-controlled simultaneous control Mitsubishi 750 Min. tube diameter: 6 mm Bjdpeu Trxhefx Adxeww Max. pipe diameter: 32 mm max. tube length 4000 mm INCLUDES 1 tool set 32 mm max. Max. feed speed 300 mm/sec Mandrel bending device with manual adjustment for NFB030S-4000 with mandrel lubrication Stainless steel oil pan with grids 2200x1400x4mm Additional tool sets for NFB030S-4000 consisting of movable tool coated steel insert Fixed tool with coated inserts tool holder tube holder feed rod 22,x2,5mm

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Mimu machine-tools (Italy) Bwsdpfophvlaox Adxjw

Condition: used, Year of construction: 2005, Traverse X-axis: 450 mm X axis travel: 450 mm Z-axis travel: 250 mm X-axis resolution: 0.001 mm X axis resolution: 0.001 mm Z-axis resolution: 0.001 mm Resolution Z axis: 0.001 mm Resolution C-Ache: 0.001° X-axis rapid traverse: 15 m / min Rapid X axis: 15 m / min Rapid traverse Z-axis: 30 m / min., Rapid Z axis: 30 m/min., Workpiece length max.: 320 mm Workpiece diameter max.: 32 mm Workpiece weight max.: 2.5 kg tool holder cone: ISO 50 Tool holder cone: ISO 50 Grinding spindle speed stepless: max. 7,500 rpm Grinding wheel diameter: max 350 mm Connected load approx.: 25KVA (400V /50Hz) Dimensions L x W x H: 1900x1900x1900mm Weight approx.: 4000 kg Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software Software NUMROTOplus touch cycles workpiece (RS/SF) Software NUMROTOplus SF cycles Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor) Chuck clamping cylinder pneumatic Balancing system SA (semi-automatic) EB 500 Pneumatic workpiece clamping Oil collecting pan Bjdsku Hwpjpfx Adxoww Electrostatic mist extractor.

Condition: refurbished (used), Year of construction: 1989, I am selling modernized machines for grinding rings for rolling bearings. Bjdpfow Tiitox Adxoww For all further information and details, please contact us.