Used Timber Drying Kiln for sale (3,453)

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 price: 10.900 € Podpfjity Adox Ac Aorb contact: Mr. Rainer Eckerle

Year of construction: 2001, condition: excellent (used), I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Pjdpfxji Eup Ej Ac Aerb Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately.

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Prodob Hu S Tepfx Ac Aeb

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Peded I T Exopfx Ac Ajrb Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Prjdpfx Asq Igyvoc Ajb Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. Prjdpfx Acsq Nfuze Ajb 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 Podord Acpjpfx Ac Asrb -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Year of construction: 2010, condition: excellent (used), Wachtel Compact 1.8 rotary stove - used - year of production 2010 - with STIR system - gas burner - for metal sheets 58 x 78 - fully assembled Psdpforgn Tvex Ac Aorb - digital control - good technical condition - 3 pieces on offer - Price for inquiry

Condition: good (used), Year of construction: 2003, machine/vehicle number: 3101, Kaeser TD51 Refrigerated air dryer Serial: 3101 Psdpfoqqhkpsx Ac Asrb 2003, Refrigerant R34A, 18Bar

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Prjdpfxjt S Efge Ac Aob Total power 37,7 kW Very good condition, available immediately.

Condition: good (used), Year of construction: 2013, Hein Luxrotor rotary furnace - used - year of manufacture 2013 - for sheet metal 58 x 98 - electric - total power approx. 70 kW - computer control with touchscreen Prsdpfxjzly Eze Ac Ajb - fume hood with fan - ceramic wall - 1 trolley - trolley top locking system - technical condition good / device inspected and cleaned - collection from warehouse - price on request

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Total length 2,00m Predpfxoyzr Ago Ac Aeb Very good condition, available immediately.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Prjdpfsy Iamtsx Ac Aob

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Prjdpfxszbypys Ac Aeb Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Pjdpfx Ajy Nkqxec Asrb Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: used, The device is in good working order and ready for use; it can be used to dry fruits or vegetables after washing. Length: 6000 mm Prjdpey Uaxisfx Ac Aob Working width: 700 mm Overall width: 950 mm Height: 900 - 1300 mm Please check out my other listings.

Condition: excellent (used), functionality: fully functional, Schomaker STWC-600 | Dry Breader Manufacturer: Schomaker Type / Model: STWC-600 Serial Number: 280515 Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 2900 × 900 × 1930 mm Equipped with an integrated, upper hopper for breading material (e.g., breadcrumbs, flour, or fine-grained spices). The STWC-600 is a fully professional, industrial dry breader designed for the automatic and continuous coating of food products with dry breading. This machine is a key component of "convenience food" production lines, working directly with formers and liquid breaders (which apply batter or dough). It is an ideal solution for the production of nuggets, cutlets, fish sticks, poultry wings, and vegetable-based and molded snacks. The 600 mm working width of the mesh belt guarantees excellent throughput, allowing for smooth synchronization of the device with efficient frying or freezing tunnels. Key features and operating principle: - Full coating system (360°): The device evenly applies breading to all sides of the product. The bottom part of the product is coated by passing over the so-called "breading bed" on the belt, while the top and side sections receive a uniform flow of medium from the integrated curtain system. - Recycling and breading saving system: The machine has a built-in internal transport system (e.g., screw conveyor or vertical conveyor) that collects excess unused breading from the lower trough and transports it back to the upper hopper, operating in a closed loop. - System for removing excess breading: The equipment is fitted with an adjustable air blower or a vibration system, which effectively removes loose, excess amounts of breadcrumbs or flour from the product before it enters the fryer, preventing oil from burning and improving the appearance of the product. Podjy Ub S Rjpfx Ac Aerb

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 4 m³/h, overall weight: 110 kg, type of input current: DC, input voltage: 230 V, warranty duration: 12 months, operating pressure: 7 bar, noise level: 85 dB, hose package length: 5,200 mm, We offer new and used Cold Jet machines for sale. I am an authorized dealer in Poland. Our range includes all available models of dry ice cleaning machines. Financing options available through leasing. The set includes a dry ice applicator, a 5.2-meter hose, one selected nozzle, and a hose for compressed air supply. Also included are hose clamps, holders, transport straps, and a user manual. Prsdpfxey D Enno Ac Asb

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1/12 Block The unit is in full working condition and is ready for immediate release Predpfx Aey Iw D Njc Asb The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, Manufacturer: STT Type: Dryer 1500 Factory/Manufacturer number: 930671 Device type: Refrigerant dryer / Compressed air dryer Supply voltage: 400 V Phases / Frequency: 3-phase / 50 Hz Control voltage: 230 V Power consumption: 5,505 W Current consumption: 10 A Refrigerant: R134a Refrigerant charge: 830 g Predpfx Aezx Tiyoc Ajb Design: Stand-alone unit

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food processing, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2004 Dimensions: (H x W x D) 2000 x 600 x 800 mm Prjdpezwl Rgsfx Ac Aob We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically designed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g Pjdpszwmacsfx Ac Aorb - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2002 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, overall weight: 35,000 kg, axle configuration: > 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, trailer brake: trailer braked, Year of construction: 2012, Log carrier semi-trailer, designed for transporting timber, manufactured in 2012, in good working condition, with half-leaf spring suspension and air suspension, and drum brakes. Prodjzlbwrspfx Ac Aob

Condition: used, functionality: fully functional, Year of construction: 2003, Used Ammann rotary drum dryer Year of manufacture: 2003 Podpfx Acjzxbn Dj Aerb Burner: Oertli, year of manufacture: 2003, output: 9.74 kW Infeed conveyor belt

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Prjdpfx Acezc Hvps Ajb Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.