Used Thermal Bridges for sale (2,166)

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Gedpfx Aijwbdv Sjvokc Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Godpfx Aefz U Nbjivekc 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, This listing is for 1 of 3 Roche LightCycler II Thermal Cycler Godsxzguhjpfx Aivokc

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Gedpfx Aijfz Nd Isvjkc Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, functionality: unexamined, Used Netzsch thermal analyzer set consisting of a computer with components and software, analyzer (STA 409 EP), controller (TASC 414/3), and power supply (Pu 1.851.405). Manufacturer: Netzsch Model: STA 409 EP | TASC 414/3 | Pu 1.851.405 Gkjdpozv Sniefx Aivjc Voltage: 230V (50/60Hz)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Gksdpfx Asfzccnoivjc ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Gkjdpfx Aefy T H Ieivsc 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Gedpfx Ajzp E T Seivskc Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, This listing is for PCR Max Alpha Thermal Cycler Gsdjy Hw Skepfx Aivskc The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Gjdpfx Asfzb Nijivjkc ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Gksdpjfz I Rxofx Aivjc ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Scheffer Overhead Crane System 500 kg For sale is a high-quality, fully functional overhead crane system (single-girder bridge crane) from the premium manufacturer Scheffer Krantechnik, equipped with top-quality components from Demag. The system features a synchronous dual hoist unit (tandem operation) with two independently movable Demag electric hoists. This design is ideal for lifting long, bulky, or heavy goods (such as profiles, pipes, or plates) absolutely horizontally and safely at two points simultaneously. Technical data regarding load capacity and performance: Total load capacity of the system: 500 kg (0.5 tons) when using both hoist units simultaneously. Load capacity per hoist unit: 250 kg each. Gkedjzrw Awepfx Aivsc Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoist units in a 2-strand operation with a base load of 125 kg each). Crane manufacturer: Scheffer Krantechnik (Leading Crane Technology) Hoists and trolley systems: Demag (BZA electric hoists) Factory number: 22667/15 Power supply: Integrated cable track along the main girder (C-rail with cable carrier) Professional wireless remote control system: HBC-radiomatic micron Condition: Used, fully functional and reliably used in a workshop environment until recently. Steel structure: Heavy-duty steel columns/supports for completely freestanding installation. Condition: Disassembled and ready for loading. Collection: Free of charge by the buyer. Loading service: A forklift is available on-site. We will be happy to assist you free of charge with loading onto your transport vehicle. "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, This listing is for 1 of 2 Roche LightCycler 1.5 Thermal Cycler Gkedpfxsxzgune Aivsc

Condition: used, This listing is for 1 of 2 Roche LightCycler 2.0 Thermal Cycler Gsdexzgt Rjpfx Aivjkc

Condition: used, functionality: fully functional, Year of construction: 1975, machine/vehicle number: CR2360 / 075, Abus / Steel - Year of manufacture approx. 1975 - Abus chain hoist, year of manufacture 2008 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system Load capacity 2000 kg Width approx. 8.4 m, gauge approx. 7 m Crane girder INP240 Godezv H H Hjpfx Aivjkc Includes running gear, complete control system, floor-level operation via control panel, chain hoist Abus GM6-2000.5, 2-strand All cranes can be moved electrically in all 3 axes Lifting height/hook travel approx. 4 m Connection to 400V 16A Year of manufacture approx. 1970/2008 Good used condition Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: - Milling Gjdpfoy Iu Rasx Aivskc - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: used, This listing is for a Roche LightCycler II Thermal Cycler Parts Only Gksdpfx Aoxzguboivoc

Condition: like new (used), Year of construction: 2019, machine/vehicle number: DN-EDL-2500KG, Abus EDL overhead crane, bridge crane, crane system, hall crane, portal crane, suspended crane system Payload: 2500 kg Width: approx. 11.5 m, track gauge: approx. 10.5 m Includes wireless remote control Lifting height/hook travel: 6 m Connection: 400 V, 16 A Gkedpfszv Eluox Aivec Year of manufacture: 2019 Very good condition, almost new. See pictures. Shipping via freight forwarder, collection preferred. Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 060-8433, Cutting length: 3,500 mm Support carriage travel: 3,800 mm Bridge carriage travel: 3,500 mm Vertical adjustment: 400 mm Cutting wheel diameter: 625 mm Maximum cutting depth: 210 mm Blade drive motor: 12 kW, 2 speeds: 950 and 1,450 rpm Rotary table Gjdjzl Hhvspfx Aivekc Laser

Condition: used, Year of construction: 2027, Budget loading ramp 8t Bj 2026 new Capacity 8000kg Wheel width 1990 cm Length mtr 10500 Hydraulic adjustable Immediately available Gjdpfx Aiezxmhvovekc If you are interested in our loading bridge, we can arrange transport for you. Loading ramp loading ramps loading ramp loading ramp loading ramp: Loading ramp Loading ram: Loading ramp Loading ram: Loading ramp Loading ramp loading ramps loading ramp loading ramp entry plate loading bridge: Loading ramp

Year of construction: 2009, condition: used, This listing is for 2009 Applied Biosystems 2720 Thermal Cycler The unit is in full working condition and ready for immediate use This thermal cycler is a high-quality lab instrument manufactured by Applied Biosystems (Model: 2720 Thermal Cycler). A proven and robust PCR workhorse delivering precise thermal control for dependable DNA amplification. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Gsdpfx Aiszqf Nvevekc Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Year of construction: 2006, operating hours: 1,296 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (May 2023) with only 1296 laser hours Gksdpfeyta N Djx Aivjc 2400 dpi Z-speed Total number of plates exposed: 258,861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from right to left with Prinergy EVO 3 workflow, including dongle, Printconsole 5.1, and Dell PowerEdge 7330.

Year of construction: 2003, condition: good (used), functionality: fully functional, Selling GMM Eura 35 2003 Brdige saw. In good working condition. Inclinates cuts. Table rotate and lift. Table dimensions 3500x1800. Available in september 2026. Location Latvia. Gksdpfx Aozku Unsivoc

Condition: like new (used), Year of construction: 1996, Retrofitted: 2023 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1800 mmDistance between columns: 1680 mmZ axis traverse: 800 mm Milling head Head type: Standard vertical spindleTool clamping system: HydraulicTaper nose: ISO 50Speed range: 20 - 2000 r.p.m.Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kgMachine weight: 21500 kgMachine dimensions: 7300 x 2690 x 3400 mm Accessories Guarding: YesCoolant: ExternalElectronic handwheel: HR-330 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Godpfx Aioz Iuk Uevekc

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. Gkjdpfx Aoykqxdjivoc • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.