Used Textile for sale (717)

Year of construction: 1985, condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Godpfx Aaorm S Exofouf

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Gsdpfxoyz An Tj Aafsuf

Year of construction: 1990, condition: ready for operation (used), A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement. Gujdozcfizspfx Aafjf

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Gsdpfxszhntro Aafeuf

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Gsdpfx Ajw Sxyrsafeuf

Year of construction: 1991, condition: ready for operation (used), These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible. Godew Tl Irjpfx Aafouf

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Godpeyt N Dqsfx Aafeuf

Year of construction: 1999, condition: ready for operation (used), A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible. Gsdpowhp Nqefx Aafsuf

Condition: ready for operation (used), Year of construction: 2001, Five Picanol rapier weaving machines are available. Working width: 1900mm, weft colors: 8. Including 8 weft yarn feeders (feeders) and 8 heald frames. Documentation available. On-site inspection is possible. Gjdpfx Aaoyhgn Nefsuf

Condition: ready for operation (used), Year of construction: 1990, Two jigger dyeing machines from various manufacturers are available. 1) Thies type NT 2300, year of manufacture: 2015, max. working temperature: 98°C, max. fabric width: 2850mm, roller width: 3000mm, max. fabric length at thickness from 0.3mm: 3177mm. 2) MCS Maxi Jigger 98°, year of manufacture: 2021, batch liquor ratio: 1:2, roller diameter: 320mm, lower roller diameter: 139.7mm. Documentation available. An on-site inspection is possible. Individual sale is possible. Godoyhqb Hspfx Aafouf

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Gusdpfxoyhqb Ts Aafof

Year of construction: 2019, condition: ready for operation (used), A fully automatic rubberized 90° fitted sheet production line (fitted sheet) Automatex Canada is available. Orientation: W/L and L/L, material feed: unwinder, sewing heads: 4, sewing head distribution left/right: 2/2, end product: fitted sheet corners/box formation, corner angle: 90°. Including tension control, edge and web guiding, longitudinal hemming station with elastic band insertion, length measurement, cross cutting and conveying units. Documentation available. An on-site inspection is possible. Godpfoyhqcqex Aafsuf

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Gujdpfx Aajzcfhdsfef

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Gujdpfx Aozc Rdqsafof

Condition: ready for operation (used), Year of construction: 2013, Various Veit ironing tables including Reverberi steam generators are available. 1) 7x Veit Varioset flat ironing table, ironing surface: 1300mm/650mm, height adjustment range: 830mm-990mm, weight: approx. 120kg. 2) 5x Veit pointed ironing table, ironing surface: 1100mm/380mm, weight: approx. 120kg. 3) 3x Reverberi GAK5DP steam generator, year of manufacture: 2013, version: Duplex, heating capacity: 5kW, operating pressure: 3bar. In addition, two steam generators and one flat ironing table are included as defective units. Documentation available. An on-site inspection is possible. Sale only as one complete package. Guodpfx Aajzi Ehpsfef

Year of construction: 2021, condition: ready for operation (used), The machine is designed for foam mattresses, the cores to be processed can also be wrapped with wadding fleece or tricot material, mattress dimensions: 100 to 780x100 to 200mm, compressed air connection: 6 to 8bar, connected load: 1.5kW, weight: 850kg, operating hours reading: 10h, with control system and roller conveyor table. An inspection on site is possible. Guodpfxezbb Sie Aafjf

Condition: ready for operation (used), Year of construction: 2000, A complete braiding line with peripheral devices and a total of twelve Krenzler braiding machines is available. 1) 7x Krenzler SKZ 8E/54H braiding machine, years of manufacture: 2002-2004, control: Krenzler SmartCard, number of carriers: 52, max. working speed: 240rpm, weight: approx. 750kg. 2) 5x Krenzler SKZ 8E/62H braiding machine, years of manufacture: 2000-2005, number of carriers: 64, max. working speed: 240rpm, weight: approx. 1000kg. 3) Herzog SP 280E winding machine, year of manufacture: 2018, winding positions: 4, max. spindle speed: 3300rpm, bobbin diameter range: 39mm-120mm, bobbin width range: 1100mm-280mm. Including 76x mandrels and flanges, approx. 2000 bobbins, approx. 700 carriers, 545 production cards, Mirage software, collection books and sample inventory. Documentation available. An on-site inspection is possible. Gusdpfx Aajzbl N Esfof

Condition: ready for operation (used), Year of construction: 1997, A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible. Guedpfx Aaeyz Apdefjf

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Guedpfxozukrds Aafef

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Gjdpfx Aezqhdieafeuf Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material Guodpfxsif Ek Rj Aafjf • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization Godpefnlkwofx Aafsuf (Product photo as an example) The machine is CE certified.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, power of the servo motor: 5 W, pneumatic connection: 6 bar, Production capabilities and applications This automatic edging machine centralizes the complete finishing of quilts into a single operation. In practice, on your production line, you move from the quilted panel to the finished product without multiple handling steps between workstations. Gedpfx Aajzmpvljfjuf You can process white or colored quilts in various formats, with few intermediate adjustments. What truly changes in production is the consistent pace and the reduction in handling, which minimizes edging defects. Automated bias tape application system This machine is equipped with 2 MAR180059 devices dedicated to bias tape application. The bias tape is guided consistently thanks to the compensated foot-driven system, which ensures secure stitching on the varying thicknesses of a quilt. Indicative production rate: 60 sec/piece Bias tape width: with Pegasus head, max 45mm / min 30mm Quilt dimensions: from 1x1m to 2.6x2.6m (standard) Table dimensions: 3000x4000 mm Power supply: 380V 50Hz Installed power: 5 kW Compressed air: 6 bar, approx. 6-8 L/piece Two versions available: lockstitch (Dürkopp 867 head) or chain stitch (Pegasus EXT3216H head modified by Rimac) Programming via touchscreen, automatic dimension recognition, application of one or two labels, thread/label/bias tape monitoring with alarm, integrated waste suction.

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Guodpfx Aasvvi Iqofof

Condition: used, Year of construction: 2010, color: blue, overall weight: 16,000 kg, maximum load weight: 12,600 kg, empty load weight: 3,400 kg, loading space volume: 51 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,700 mm, first registration: 06/2010, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference no. for inquiries: 77889911 Krone, swap body / container * Year of manufacture: 2010 * 7.82 m length * Fixed roof * Portal doors * Textile specification * Full double-deck incl. support beams * Rail-loadable – craneable * Other / miscellaneous * Gross vehicle weight: 16,000 kg * Tare weight: 3,400 kg * Payload: 12,600 kg * Permissible total weight: 16,000 kg Gjdpfx Aoyib S Nsafsuf * Internal dimensions: L = 7,700 mm, W = 2,480 mm, H = 2,700 mm * Internal volume*: 52 m³ * Corner fitting dimension E = 5,853 mm * Overhang dimension = 983 mm * Coupling (parking) height: 1,120 mm * Pallet positions: 19 * Manufacturer: TULO swap body 7.82 * Double-deck with beams Disclaimer: Subject to changes, prior sale, and errors excepted. Further photos and videos can be found on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, paintwork etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation / transfer of commercial vehicles Please contact our trained sales team – we will be pleased to advise you.