Used Tenon Cutter for sale (3,207)

Condition: good (used), amount 1 STK Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm HSS hob for high wear resistance Bodpfxozuumxj Akisdi

Condition: used, Year of construction: 2000, working width: 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,000 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 180 mm Bdodpfx Asz Ekiujkisi Type of processing: Grinding and finishing Number of processing units: 2 Processing unit 1 Design: Combined roller-pad unit Roller: Rubber roller Processing unit 2 Design: Pad unit Pad orientation: vertical The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6385

Condition: good (used), Karl Tranklein EK-100 Corner Rounder Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Bjdez Rk Rqepfx Akiedi Replaceable blades. Adjustable margins. One set of blades with a 12 mm radius is included. Stack height: 100 mm Weight: 130 kg Cycles per minute: 50 cycles/min Power supply: 400 V Waste is directed outside the machine to the chutes. This is the model currently in production.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake Bdodez Sualepfx Akiei – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. Bdodpfx Aezyc T Rjkiei In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter Bodpfx Aezqyr Sokiodi -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg

Condition: good (used), Tranklein EH I corner cutter Made in Germany. Perfect condition. This is a professional device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 4 mm is included. Stack height 55 mm Bdjdpfxjz N Si Se Akisi Weight 32 kg This is the currently produced model.

Condition: new, functionality: fully functional, MARCELISSEN SHC (Compact Hydro Cutter) | Hydro Cutter for cutting fries and root vegetables Manufacturer: Marcelissen Food Processing Machinery Model / Type: SHC / Hydro Cutter (Compact Hydro Cutter) Condition: New Power supply: 400 V, 50 Hz, 3-phase Capacity: up to 10,000 kg/h (10 t/h) Working area: approx. 7.5 m² Overall dimensions: modular line with a total length of approx. 6000–7500 mm x width 1500 mm x height 2200 mm The industrial Marcelissen SHC (Compact Hydro Cutter) is an advanced line designed for hydromechanical, continuous cutting of potatoes and other root vegetables (carrots, beets) into fries, sticks, wedges, and slices. The operating principle is based on the use of a water jet as a pressure medium: the product placed in a buffer tank is drawn in and accelerated in a closed pipe system, and then passes through a stationary knife block under high pressure. Thanks to the hydraulic guidance of the raw material in the pressure channel, the product hits the knives perfectly axially, which eliminates mechanical damage and cracking of the fries, guaranteeing a uniform, smooth cross-section and maximum yield. The device is ideal for large fruit and vegetable processing plants, french fry factories, frozen food factories, as well as established butcher shops and catering companies that produce ready-to-eat products. Bodpfx Asz N S E Hokijdi The well-thought-out, modular compact design ensures that the line occupies less than 7.5 m² of floor space while maintaining a very high capacity of up to 10 tons per hour. The quick-change system for knife cassettes allows the machine to be reconfigured for a different cutting format in less than a minute, which minimizes production downtime.

Condition: used, functionality: fully functional, machine/vehicle number: 27673, We offer for sale a used industrial cutting machine, an assyst bullmer procut XL 7501. The machine is fully functional and was in regular, full operation until yesterday. We are selling it exclusively because we have acquired new equipment. This is an excellent opportunity for a company looking for a proven and operational cutting machine without having to wait for the delivery of new equipment. Key features: • Manufacturer: assyst bullmer • Model: procut XL 7501 • Used, fully functional machine • Recently in daily operation • Available after upgrading our machinery • Possibility of quick handover Bdodjz R Ntlspfx Akiei Price: The estimated price is €15,000. We are prepared to discuss the price during serious negotiations. If you are interested, please contact us. We will be happy to provide further information, photographs, or arrange a machine inspection.

Condition: good (used), End mill, milling cutter, shank thread milling cutter, thread cutter Bedogfcm Repfx Akiedi -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool Bodpeb A Npwsfx Akiedi -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg

Condition: good (used), Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Bsdpfx Akob A Rg Ueiodi Type: HSS -Sale: only complete set -Weight: 8 kg

Condition: excellent (used), Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever Bdedpfxsb A Rz Aj Akiji -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum Bdedpfx Asr H Nlhskiji -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm² Bodebicbzopfx Akijdi

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter Bdodpfxob A Hv De Akioi -Saw blades: 2 pieces -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Bdjdpfx Aeb A H Ihokiji -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Condition: excellent (used), Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg Bedpsb A I Sfsfx Akisdi

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Bedsciv Tcopfx Akiedi -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Bdsdsr Ha Dvepfx Akisi Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Bdedpjzvvc Dsfx Akiji Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, Seydelmann K504 VA-DC Vacuum Bowl Cutter Bsdey Hl D Uopfx Akisdi Brand: Seydelmann Type: K504 VA-DC Year of manufacture: 2008 Bowl capacity: 500 liters Overall dimensions: 2600 mm x 2250 mm x 2200 mm Complete technical documentation The unit is equipped with a 500-liter bowl and an integrated vacuum system, which enables processing of the filling without air access. Vacuum operation ensures better binding of the mixture, improves color stability, and extends the shelf life of the final product by eliminating oxidation.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Bedpfx Akow Evq Asiedi Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z8 V8 Bdodezrykdjpfx Akisi - Flight circle (ø): 220 mm - Bore: 70 mm - Length: 30 mm - Material: Steel

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Size min.: 40 x 70mm - max. 260 x 380mm Bdjdpfsztzp Rex Akisi Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test