Used Tape for sale (520)

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm table height 480 mm saw band length 3350 mm width of saw-band 10 mm Bsdpowhqtdofx Afmolp total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: used, Dough laminator Manufacturer: Seewer Rondo Model: SSO 62 Blsdpfxew Nw A Tj Afmjp Dimensions: 305x115x120cm Electrical power: 1.1kW Voltage: 380V 50Hz Tape dimensions: 62x130cm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 163 h, functionality: fully functional, Roland R704 3B Attribute Specification Colors 4 Max. Paper Size 74 cm x 104 cm (approx. 29 x 40 inches) Max. Print Area 71.5 cm x 102 cm Max. Speed 15,000 sheets per hour (sph) Paper Thickness 0.04 mm - 1.00 mm Machine Length 9573 mm Bedpfxjyfg N Ue Afmolp Year: 1999 Color 4 0 / 2 2 Imp count: 163 mil Max speed: 15.000 sh/h APL Blanket Washing System - with Brush Ink Roller Washing Ink Temp control - Without Chiller Tehnotrans Steel plate in feeder and delivery Suction feed board powder sprayer Technotrans Beta refrigeration Axial circumferential diagonal register remote control Automatic format adjustment Color Pilot Control Sheet decurler Air Glide delivery Tape inserter at delivery In production Available immediately

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Blodpjxggzlefx Afmep Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm. Bodpjztq Ezsfx Afmelp

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver Blsdszufl Sepfx Afmep ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: good (used), Busch TB24 I Banding Machine The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Band dimensions: Length: unlimited Bedpfx Afjzlgd Rsmslp Width: Paper – 24 cm Foil – 18 cm Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Bodszyz Dnopfx Afmelp Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Blsdpez Aaggsfx Afmjp Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: PCPP350-001, type of input current: AC, input voltage: 220 V, input current: 11 A, input frequency: 50 Hz, For sale is a professional, automatic tape and label cutting machine from Italian manufacturer Meccanica Maggiore s.r.l., model Procut 350. Bljdpez Hdhtefx Afmep The machine is brand new and has never been used in a production cycle (0 operating hours). It is preserved in its original protective film, fully functional, and ready for immediate pickup. Technical specifications: - Manufacturer: Meccanica Maggiore s.r.l. (Italy) - Model: Procut 350 - Year of manufacture: 2020 - Condition: Factory new / unused - Serial number: PCPP350-001 - Working width: 350 mm - Power supply: 220V / 230V, 1PH+N (standard single-phase socket) - Power: 2.5 kW - CE certificate Precise kiss-cut and full-cut processing from roll to roll for a wide range of flexible and technical materials: - Labels and films: self-adhesive labels, PVC, PP, PET films, protective films. - Tapes and hook-and-loop fasteners: hook-and-loop tapes (Velcro), industrial double-sided tapes, reflective tapes, foam and masking tapes. - Foams and plastics: EPDM foams, felt, self-adhesive pads, furniture hook-and-loop fasteners, abrasive discs. - Technical materials: rubber/silicone seals, soundproofing elements, medical laminates, and technical textiles. Designed for industries such as: Label printing companies, tape and hook-and-loop fastener converters, furniture/mattress manufacturers, companies in the automotive and electronics industries, and clothing and workwear sewing factories. Condition: Machine is factory new (0 operating hours) – ready to be implemented in a production process. Location: Łódź (Poland). The machine can be viewed on-site.

Condition: new, Year of construction: 2026, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 350 mm, air pressure: 6 bar, section length (min.): 50 mm, HECHT Double Mitre Saw Exenso DS350E - 3000 mm for wood, glass strips, mullions, profile strips, aluminum strips, etc. Item number 942.5103, 1 piece, HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inward) to 135° (outward) - Right head is adjustable Bledpjzr Uu Rjfx Afmep - Saw blade mounting Ø 350 mm - Incl. 1 piece of center support. - Clamping of the units is pneumatic. - Positioning control Exenso DS3 with touch panel, 15" display in a dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of cutting data manually - Processing of data from a cutting list (data set according to specifications) - Processing of measuring tape data (radio measuring gauge GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item number 942.5203, 1 x DS feed device, hydropneumatic Item number 723.0121, 2 x DS saw blade for wood Bevel/bevel/flat tooth - positive - Item number 942.5236, 2 x DS workpiece clamping, combined (4 x horizontal, 4 x vertical clamping elements) Combined workpiece clamping consisting of: Swivel clamp, pneumatic - for clamping the material from above. (Free access to the work table) Horizontal clamp, pneumatic - torsion-resistant clamping cylinder with pressure piece. The clamps can be selected individually via the saw's control system. The clamping sequence can also be set via the control system. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item number 942.5241, 1 set DS350 table support, grooved (standard groove), Special grooving according to customer drawing on request! - Documentation: 1 x German or in the respective national language - Item number 945.2007, Packaging DS350 (transport frame) - Item number 944.1023, GMF measuring gauge, 3000 mm complete set (1500 mm plus extension 1500 mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glass strips. Function For use on doors and large window sashes, the GMF measuring gauge can be extended mechanically and safely up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection and calculation.

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Bljdpfozqiiaex Afmep Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Year of construction: 2007, condition: used, X2 machine (Revolver head 12 + dubble twin heads) 2007/2008 year of many factory incl 4 tables. This machine has to be dismounthed to get out of the factory (Input and out conveyer, some has to do it) and there is also feeders incl in the package as follows hear under. Here it is a line computer with program incl. in the price. Feeder 00141088-01 – 26 stk ( 3 tape ) Feeder 00141092-04 – 13 stk Feeder 00141092-05 – 4 stk Feeder 00141094-03 – 1stk Blodpfx Afozzc A Uemjp

Year of construction: 1997, condition: used, Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes. Additional title: crown caps, aluminum screw caps Crown caps: 24000 pc/h Aluminium screw cap: 24000 pc/h Power: 1,7 kW Voltage: 3 x 380 V Length: 1,3 m Width: 0,6 m Height: 1,1 m Bedpfx Aoztzbmofmjlp Weight: 70 kg Material: stainless steel Base construction: Rectangular storage container with lid, base made of square tube Features: level indicator Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Year of construction: 1996, condition: ready for operation (used), A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible. Bedpfx Afoyttxfjmslp

Condition: ready for operation (used), A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible. Bjdpsyk Hcfofx Afmjlp

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Bljdpfx Aei Rizujfmep Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information: Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled with load, in the uncoupled state, the vehicle must stand at an angle towards the rear. 2 chock blocks + holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones with anti-splash flaps on the last axle 1 tarpaulin rod + holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and start-up assist, operated 3x by braking (start-up assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake Blodpfei Ri R Iex Afmop 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: Trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! with lifting and lowering valve Vehicle driving stability system Automatic tilting lowering with shut-off valve Wheels & tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part NW 48 mm. Actuation via truck auxiliary drive Tipping body Aluminum box body, sloping front wall 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Inside with ladder on the front wall. Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double hinge, externally mounted with a double hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for storage on the right, with central locking on the left. Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, so that it is not attacked by the material and does not rust. The stated total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of approval/signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the

Condition: used, Injector Inject Star PI 75 Tape width: 61.5cm Bsdeh R T Avspfx Afmjlp Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Delivery time: 30 working days after advanced payment

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides Blsdpfx Ajh Eld Esfmep * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Bedpfxjh Ellzo Afmolp Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: ready for operation (used), Heidenhain ME 101 B magnetic tape drive, part number 218996 01, used, in good condition, 100% functional. Bsdpfx Afoi Eatuemjlp

Condition: new, Year of construction: 2026, 27 HP petrol engine (LONCIN, auto start) Capacity 764 cc The maximum dimensions of the workpiece 910 x 4800 mm Bledpfx Afehg Ahnomep The dimensions of the cutting tape are 4576 x 40 x 0.9 mm Belt speed 17 m / min Tooth pitch 22 mm Wheel diameter 508 mm Manual feed Dimensions 4064 x 1778 x 1800 mm Extension 6000 x 1010 mm Transport dimensions 2080 x 750 x 830 mm Weight 722/782 kg Option transporting wheels

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including substructure. Dim: 6000 + 620 x 105mm Bljdpfx Asd Ra Uasfmep Conveyor belt width 500mm PVC conveyor belt incl. Studs, sidewall and sealing tape V2A feeding hopper at the beginning of the conveyor belt. * optional with magnetic deflection roller at the end of the conveyor belt. * optionally available as a climbing conveyor * Special designs in all versions possible.

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø150 x 160 mm -Item no.: 840 853 65 -Heating power: 2450 W -Voltage: 220V -Number: 2x heating tape available -Price per piece Bledpfolvylkjx Afmep -Dimensions: 215/170/H160 mm -Weight: 2.1 kg