Used Support Ribbon Magnet for sale (14,603)

Year of construction: 2022, condition: good (used), machine/vehicle number: 108028, Offer 26073 Technical data: - Boiler capacity: 1000 L - Operating pressure: 11 bar - Maintenance opening - EC Directive 2014-68 EU - Boiler diameter: 800 mm Codpfx Ajzgcm Deaxord - Shut-off valves - Pressure reducer - Electric condensate drain: 220 V - Space requirement: approx. W 1150 x H 2450 x D 900 mm - Weight: approx. 300 kg

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Codpjqu Uyksfx Aaxerd

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Codpfx Aaoq E Ti Hjxerd Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Year of construction: 2015, operating hours: 3,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R1805, Description: Take a look at WOKO MAGNET UND ANLAGEBAU GmbH. Crodpfezgbrrsx Aaxod

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Crsdpfx Aozfh U Deaxod Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Csdpfx Aasx Axbcoxsrd

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled) Crjdpfx Aaeziab Doxsd

Condition: excellent (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: Ø 1600 mm -Plate height: 70 mm -Control unit: Type ST214 Crodezka Uaopfx Aaxod -Remote control: Type KEYBOARD ST210 -Connection: 400 volts -Magnetic plate weight: 960 kg -Dimensions: 1650/1600/H270 mm -Weight: 997 kg

Condition: new, (made by N & N) new ! all stainless steel Crodszg E Udopfx Aaxod capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Credpfozgf Spsx Aaxsd Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 3 available System support for SLS-line A3-A6 B00978-04-02 Crsdpezi Dykjfx Aaxsd LEONI

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Cjdsyiamrjpfx Aaxjrd Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: good (used), various accessories for grinding Cedew Iz Tyepfx Aaxsrd 10 x grinding discs (9 x grinding stones) Jung 415/520 – EUR 185/each

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet Csdozgd Enjpfx Aaxerd - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Credpfx Aaezi A U Tjxjd Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good

Condition: good (used), Stop magnet, pull magnet, eject magnet, stop magnet, locking unit Codpfx Aajb A Suhoxerd -Type: 50 003-06C1 -Connection: 220 V -Magnetic force: 6.5N Price: per piece -Quantity: 1 available -Weight: 0.4 kg

Condition: good (used), Steel beam, HEB steel beam, I-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Total length: 4280 mm -Base plate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Beam width: 140 mm Crodpfx Aasw Du Hyjxed -Beam depth: 140 mm -Flange thickness: 12 mm -Floor thickness: 7 mm Condition: good, as shown in the pictures -Number: 53 steel beams available Price: per piece -Weight: 171 kg/piece

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm Cedpezinxqofx Aaxsrd - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: excellent (used), power: 6 kW (8.16 HP), Year of construction: 2003, Year of manufacture: 2003 Cedju Hlgbopfx Aaxerd Technical condition: very good Visual appearance: very good Damages: none Please contact Ferdinand Pater for more information

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. Crsdpowvaidjfx Aaxed 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677401002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Codpfozfyr Iex Aaxerd

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677411020, with 1FU1050-65BF 13.3 mVmin Tachometer - Z = K93 (housing IP67), used, in good condition, 100% functional, scope of delivery as shown in the photos. Crjdpfx Aszfyr Uoaxjd

Condition: used, Year of construction: 2004, length 3150 mm width 725 mm speed 20 m/min Csdpoyx Ig Njfx Aaxsrd power capacity 0,75 kW weight 0,35 t dimensions (WxLxH) 0,95 x 3,15 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck width of magnet approx. 650 mm

Condition: good (used), electric magnetic plate, mounting plate, magnetic clamping plate, magnetic mounting plate, magnetic prism, magnetic prism, magnetic base -Magnetic prism: Magnetic measuring and clamping prism Crjdpfsx Sv Sajx Aaxsd -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

Condition: ready for operation (used), Siemens 1HU3078-0AC01-Z permanent magnet motor, serial number: ED087590701005, with 1HU1053 20mVmin tachometer and EBD 2M 24V-23W holding brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cedpfx Aszd I Emeaxsrd