Used Studer Tschudin Kellenberger Mikrosa for sale (58)

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. Fodoxxy A Topfx Agxegi • Demonstration under power and test run possible at any time. Availability: Available for immediate delivery!

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - Center height : 102 [mm] - Strokes (X/Z) : 450 x 200 [mm] - Max speeds (X/Z) : 12 [m/min] SPINDLE SUPPORT - Spindle number : 2 WORKPIECE HEADSTOCK - Max. workhead speeds : 1500 [rpm] - Spindle clearance : 28.6 [mm] - Power : 1.4 [kW] - Mounting tape r: A2.4/CM5 - Torque : 150 [Nm] - Manual B axis angle : +/- 2 [°] - C axis : 0.0001 [°] POWER SUPPLY - Installed power: 34 [kVA] DIMENSIONS - Floor dimensions : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS Fodeuhbmqopfx Agxogi - Number of hours under power : 26781 [h] EQUIPMENT - Fanuc Oi-TD control - Spindle centre coolant - Cooling unit for spindle cooling - Loading robot - 2 spindles available : 59.600 - 41.600 [rpm] - Dressing turbine

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7360.32, Machine: Studer S40-4 Fodpfx Agjyilirsxogi Serial number: 7360.32 Year of manufacture: 1991 Control: Sinumerik System 3 Power supply: 22 kVA

Condition: used, TECHNICAL DETAILS - Number of axes: 3 - Center height: 175 [mm] - Center distance: 1000 [mm] LINEAR AXES - Grinding length: 500 mm - X x Z travel: 267 x 650 [mm] GRINDING HEAD - Outer grinding wheel dimensions: 500 x 80 x 203 [mm] - Grinding spindle power: 7.5 [kW] - Cutting speed: 44 [m/s] WORKPIECE SPINDLE - Cone type: CM5 - C-axis: +/-0.5 [°] - Power: 1 [kW] - Rotational speed: 30–1,000 [rpm] REAR HEAD - Cone type: CM3 - Sleeve stroke: 35 [mm] - Sleeve diameter: 50 [mm] - Maximum workpiece weight between centers: 130 [kg] Fgedpfjuhbydox Agxei POWER SUPPLY - Supply voltage: 400 V, 50 Hz - Machine dimensions: 2,700 x 2,350 x H. 2,100 [mm] - Weight: 4,000 [kg] MACHINE HOURS - Number of operating hours: 17,775 EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] - Paper filtering unit - Oil mist extractor - Wheel-holders flanges

Condition: used, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centers: 1000mm Center heigh 175mm Fodpfo Ad U N Nox Agxegi Grinding Wheel head rotation (B) 360° (1°) 2 ext Grinding Wheels 1 int Grinding Wheel > 20000 RPM spindle + 60000 RPM spindle Ext Grinding wheel 400 mm x 40 mm x 127 mm Workhead CM 4 0-1000 RPM CNC Fanuc Programming: Pictogramming Heidenhain linear encoders This machine can be inspected under power in our warehouse in Gussago BS Italy

Condition: used, STUDER S41 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacities: centre height 275 mm, distance between centres 1000 mm, max workpiece Ø 550 mm, workpiece height 1000 mm, Z 1150 mm, X 350 mm, workpiece weight 250 kg. Specs: grinding wheel Ø500×100 mm, peripheral speed 50/80 m/s, spindle speeds 0–4500 rpm, wheel head swivel -45/+225°, workpiece spindle motor 15 kW, 3x400 V 50 Hz, air 5 bar, tailstock stroke 60 mm (Ø 60 mm), machine weight ≈9000 kg. Accessories: high‑res C‑axis, B1+B2 axes, coolant system, internal grinding attachment, 2 spindles, lamp, status light, PC system, electronic handheld control, foot pedal. Achieves tight tolerances; typical in automotive, aerospace, toolmaking, medical and watchmaking. Fsdpfx Agj Adzdyexogi

Condition: used, TECHNICAL DETAILS - Axes number : 6 - Centers height : 175 [mm] - Distance between centers : 650[mm] LINEAR AXES - Grinding length : 800 mm - Strokes X x Z: 310 X 850 [mm] GRINDING WHEEL HOLDERS HEADSTOCK - Taper type : - Continuous orientation ( B axe) : +/- 9 [°] - C Axis indexing precision ( High speed machining): 0.001 [°] - External grinding wheel dimensions : 500 x 80 x 20 [mm] - Grinding wheel holder headstock power : 12.5.5 [kW] - Rotation speed : 1400-3200 [Rpm] PART HOLDER HEADSTOCK - Taper type : ISO50 - Axis C indexing precision : 0.001 [°] - Power : 4[kW] - Rotation speed : 1-1000 [Rpm] SYNCHRONIZED COUNTER SPINDLE - Taper type : CM4 - Quill stroke (w axe) : 90 [mm] - Quill diameter : 50 [mm] - Power :1.6[kW] - Max. part weight between centers :50 [Kg] ELECTRICAL SUPPLY - Supply tension : 400 [V] 50[Hz] MACHINE HOURS - Number of working hours : 36000 EQUIPMENT - CNC FANUC 31i-A control - Sofwares * StuderWIN * Pictogramming * StuderThread only cycles * StuderTechnilogy - Remote control with electronic handle - Measuring rules on axes X and Z - Automatic length probe arm MOVOMATIC C25 - In-process external diameter probe arm MOVOMATIC DM205 - Coolant tank 375 liters - Paper filter - Oil mist aspiration Fedeu Haf Eepfx Agxjgi - Grinding wheel loading arm - Dressing wheel diamond device ( Dia 100mm) - SENSITRON - Automotic dynamic balancing DittelM6000 - Grinding wheel holder flanges - Interface for AROBOTECH steady - Interface B3 PROFIBUS for automatic loading

Condition: used, Centre height 125 mm Distance between centres 400 mm Max. longitudinal travel 440 mm Grinding wheel 400x50x127 mm Fgsdpfx Aoylcpkogxoi Max. grinding diameter 250 mm Max. table load 80 kg Max. workpiece weight between centres 80 kg Grinding wheel speeds: number (steps) 3, 1500-1800 rpm Angular displacement +/- 45° Workpiece spindle head: - stepless speeds 30-675 rpm - rotatable 90° Spindle taper 5 MT Tailstock taper 3 MT Table speed stepless 0.05-5.50 m/min External grinding wheel motor 3 kW Machine weight approx. 1500 kg

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 Fodpfouhbxmox Agxsgi - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: reconditioned (used), Manufacturer STUDER Model S35 Favorit Year 2025 Condition Reconditioned Fodpfx Ajrakibegxjgi Stock Number 4571 Refurbishment Year 2025 Maximum distance between points 1000 mm Maximum Z-axis travel 650 mm Maximum X-axis travel 254 mm Point height 175 mm Maximum diameter for grinding 350 mm Main motor power 7.5 Kw Maximum workpiece weight 130 Kg Control type (CNC/manual) CNC CNC brand FANUC CNC model Oi-TF PLUS Grinding wheel dimensions Ø500 x Ø203 x 80 mm Grinding wheel head tilt angle + / -8.5° Length 2500 mm Width 2300 mm Height 2000 mm Approximate weight 3500 Kg

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, ⚙️ STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding operations. The machine has undergone a complete retrofit by MIRA Retrofit, including the inspection and refurbishment of its main components, as well as a careful adjustment and fine-tuning process. The result is a machine that is ready for operation, with a high level of precision, reliability, and stability, and performance comparable to that of a new machine. Key specifications: 🔹 Distance between centers: 650 mm 🔹 Height between centers: 175 mm 🔹 Grinding: external and internal 🔹 Condition: complete retrofit – ready for operation 🔧 Inspection and fine-tuning All components have been carefully inspected and adjusted to ensure high geometric accuracy and reliable, stable operation. Fgedpezuzylofx Agxji 📸 Photographs of our finished machine. 🚚 Available for immediate delivery. For more information, technical documentation, pricing, or any questions about the machine, please do not hesitate to contact us. MIRA Retrofit SA

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Fsdelbgfcopfx Agxsgi Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, TECHNICAL DETAILS - centers height : 100 [mm] - distance between centers : 650 [mm] - length of internal grinding : 100 [mm] - Ø of internal grinding : 3 to 40 [mm] - maximal table orientation : 30 [°] - workhead : * spindle speed (variator) : 60-1200 [Rpm] * motor power : 0.5 [kW] * interior cone : morse 4/2 - wheels sizes : 350 x 30 x 127 [mm] - wheelhead : * power : 3 [kW] * orientation : 15/30 [°] - maxi part weight : 20 [kg] - maxi power required : 5 [kW] Fgodjuhby Rspfx Agxei WEIGHT & DIMENSIONS - Machine floor space : 3000 x 1400 [mm] - Machine height : 1600 [mm] - Machine weight : 1900 [kg] EQUIPMENT - complete internal grinding attachment : 45.000 [rpm] - 1 complete cooling device - 1 counter headstock with fine adjustment - 1 reversible and adjustable trueing device - 1 directional diamond holder - 2 axis X, Y digital display - 1 steady rests 3 points

Condition: used, TECHNICAL DETAILS - distance between centers : 1000 [mm] - centers height : 175 [mm] - strokes (Z/X) : 1050 x 275 [mm] - max. feeds (Z/X) : 10 x 5 [m/min] - grinding wheelhead type : 2 external, 1 internal - left external grinding wheel dimension : 500 x 63 x 127 [mm] - right grinding wheel dimension : 400 x 63 x 127 [mm] - grinding wheel motor power : 7,5 [kW] - rotation speed : 1670 - 2110 [Rpm] - grinding wheelhead orientation : -15 to +225 [°] - resolution : 0.001 [°] - workhead tapper : MT5 - workhead rotation speed : 1 - 1027 [Rpm] - workhead power : 0,785 [kW] Fgodpfxjuhbyqe Agxsi - tail stock : MT3 - quill stroke : 35 [mm] - weight : 7000 [kg] - hours under power : 47.959 [h] EQUIPMENT - control CNC FANUC 16 TB - programming through Pictogramming - Release B version B275 - deported electronic handwheel - 2 grinding wheels left-right internal at 180 [°] - B axis for indexing of the grinding wheelhead every 0,001 [°] - high precision C axis for part indexing and form grinding - tail stock with fine concentricity adjustment - sensitron - upper table swiveling fine adjustment - control pedal - lenght positioning device MARPOSS E32R with sensor T25G - measuring scales HEIDENHAIN on X/Z - coolant tank with pump - 1 grinding wheel holder flange - 1 grinding wheel - 1 dry center - 1 electro-spindle : 40.000 [Rpm] - tail stock hydraulic retract through pedal

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Fgedpfx Agozbczxexsi STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: used, TECHNICAL DETAILS - Centers height : 125 [mm] - Distance between centers : 400 [mm] - Grinding wheels dimensions : 400 x 127 x 50 [mm] - Power : 4 [kW] - Max. part weight : 30 [kg] - Floor space : 3000 x 3520 [mm] - Weight : 4000 [kg] EQUIPMENT - CN FANUC 21i-T - B axis with 1° precision - Chuck 3 jaws Fodpfx Ajuhbxtsgxogi - Tool-holder flanges - 1 external grinding wheel - 1 diamond grinder - Tail stock with fine adjustment - 1 internal grinding devices with spindle 42000 rpm - Coolant tank with paper filter - Part probe

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm Fgodpfoy Nk Hyex Agxoi centre distance: 200 mm

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm grinding length: 540 mm centre height: 175 mm Fgedpfx Agoy Nk Hmjxei total power requirement: 20 kVA centre distance: 1000 mm

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Fsdpfxovca Izo Agxegi Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2026, ⚙️ Studer S20 Favorit – Universal cylindrical grinding machine 400 x 100 mm ⚙️ 🔝 Latest version with PLC and updated automation Fgodpjzcytbsfx Agxei 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: ↔️ Distance between centers: 400 mm 📏 Center height: 100 mm 🇪🇺 CE marking 🔧 Completely rebuilt (full retrofit) to offer performance and precision comparable to that of a new machine. 🛠️ Equipped with renewed components and carefully adjusted to ensure maximum reliability and precision. 🧰 Wide range of accessories available. 📅 Delivery time: available for immediate delivery! 📸 Photographs of our finished machine. 🏷️ Project reference: OP26-003 For more technical information, pricing, or details about the machine, please do not hesitate to contact us.

Condition: ready for operation (used), Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible. Fgodpfx Aeykuucogxsi

Condition: used, Year of construction: 2002, Studer S60 CNC – Very well-maintained machine Operated solely with oil Year of manufacture: 2002 Center height: 225 mm Fgodpfxjh Aykis Agxei Control system: Fanuc 16T

Condition: used, Surface grinder Center height 125 mm Distance between centers 650 mm Grinding wheel diameter 250 mm Grinding disc diameter 400 mm Total power requirement 8 kW Weight approx. 2500 kg This is a machine from Machines4you. Fgodpfx Aogfqn Nsgxji

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 350 mm grinding length 200 mm centre height 175 mm control FANUC max. workpiece length 850 mm max. workpiece weight 150 kg grinding spindle turret 4 Innenschleifspindeln z-axis 500 mm x-axis 120 mm Fsdeuxft Sepfx Agxogi weight of the machine ca. 5,7 t CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Fodow T Sh Espfx Agxjgi Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.