Used Stud Welder for sale (707)

Condition: good (used), 1 used well preserved water cooled gas shielded arc welder MIG-MAG Make: RÖWAG Model: KGL 450-2 technical data: Welding current range up to 450 A Weight approx. 200 kg Accessories / special features: - Water cooling Isdpfshy Tmzox Ag Usht - Separate feed unit with 4-roll wire feeder - Incl. hose package, pressure reducer and ground cable without shown welding wire roll! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Year of construction: 2014, condition: excellent (used), From operation resolution: MIgatronic PI 250 DC Year of manufacture 2014 Pulse function HF ignition Water cooling without function Welding range: 5-250Ampere 250Ampere at 30% ED Ihsdpfx Agjm Tit Ne Uot 180A at 60% ED 150A at 100% ED 220 Volt with 8meter torch(sheath partly damaged), ground cable and pressure reducer dimensions in mm approx. 1100x630x720 --Very well maintained unit-

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Permissible load at 35% duty cycle 400 A Ihedpjd Ih R Nefx Ag Ust at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor Isdpjwf Rg Sjfx Ag Uoht technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: good (used), Format: 500x500mm Isdpfx Agegt Un So Ujht

Condition: excellent (used), Nelson Stud welding unit Stud welding SO-SFE 100Ball Ihjdpfx Agehaahuj Ujt Ball 6,35

Condition: used, MIG MAG welding machine, protective gas welding unit EWM type MIG 230 Serial No.: L Year of manufacture: 1994 Output 230 Amp. = 35% duty cycle 120 Amp. = 100% duty cycle Adjustment range: 8 steps Power connection: 400 V, 50 Hz, 16 Amp. plug - 2-stroke and 4-stroke welding operation - Spot welding function - 2-roller wire feed - 3-meter hose assembly with central connection - Welding gas pressure reducer Dimensions (L x W x H): 1000 x 450 x 700 mm Ijdpfx Aoitv Nnog Ueht Weight: 70 kg in good condition

Condition: excellent (used), Suitable for butt welding of series parts Welding ranges wire: Ø1-9 mm (steel < 0.25% C), Ø1-6 mm (steel > 0.25% C) Welding ranges tape: 3 - 50 mm² Ihjdsw D T Dqepfx Ag Uot Smallest thickness: 0.25 mm largest width: 50 mm With manual The machine has been cleaned, checked and is ready for immediate use. The butt fusion machine is in very good condition.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welder was manufactured in 2014 in Germany by Alpha Laser GmbH but has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9 kW laser beam power), which enables the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts at any chosen location. Welding is performed in semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the workpiece. The unit is controlled via computer, joystick, and foot switch. The machine is in excellent technical and visual condition, with regular servicing. The machine comes complete with a table. Iodpfx Agetqtrfe Usht Price: 180,000 PLN net (VAT invoice available). Technical specifications of the ALPHA LASER ALM 200 laser welder: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: pulsed – Focal length: 150 mm – Power supply: 380 V / 50-60 Hz / 16 A / 8 kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11,065 – Serial number: 03001212-03.14 Additional features and equipment of the ALPHA LASER ALM 200: – Optics: LEICA microscope mount with 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Various spare parts and accessories (e.g., lamps, hoses, wire holders, detail positioning balls/bases, magnets) available at competitive prices – Various welding wires available at good prices – Option to purchase a fume extraction system

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 Iodpfxowf Rgrj Ag Usht --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Strip length: 1250 x 650 mm Welding surface: 1000x700mm Ihjdpfxei D Dz He Ag Uot

Condition: new, As a machine dealer in Offenburg, we also have welding machines from Rehm in our program. You can get an overview of the machines on our website. If you have any questions, just give us a call. MIG MAG welding machine REHM FOCUS.ARC 300 Manufacturer: REHM Type: FOCUS.ARC 300 Scope of delivery: Ihodpfx Aew Eik Njg Ust - Hose package Abicor Binzel 401 4m - Dimension cable 50mm 5m - Pressure reducer - Basket coil adapter Available immediately. For collection by the customer. Forklift available. Shipping also possible Errors, changes and prior sale reserved. Not the right machine? Then visit our website.

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle Ihodpshubg Tefx Ag Uot 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: ready for operation (used), DALEX welding unit CGW 405 Wire feeder DV 2.3 Hose adapter 10 m Connector of the hose package must be re-clamped Ihedpfx Asipvrfeg Ust Weight 310 kg

Year of construction: 2013, condition: excellent (used), From company liquidation: Kjellberg TIG 321 AC/DC Year of manufacture 2013 Pulse function HF ignition Water cooling Welding range: 5-320Ampere 320Ampere at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 Iodpfx Agohp U Rme Ueht --Very well maintained unit-

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 Ihjdpfx Agswf Rg Es Ujt --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Format 500x500mm Iodpfogt Unkex Ag Ujht

Condition: new, As a REHM specialist dealer, we now have the opportunity for customers in Offenburg and the surrounding area to receive up to 40% subsidy from the state when purchasing a new MIG/MAG PULS welding machine. Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries. REHM MIG/MAG welding machine FOCUS.ARC P REDUCES CO2 AND BRINGS MONEY FROM THE STATE WHO SUPPORTS? The Federal Office of Economics and Export Control (BAFA) supports investment measures to optimize the energy efficiency of systems and processes. WHAT IS SUPPORTED? Investments that demonstrably lead to energy savings and thus to a reduction in CO2 emissions can be subsidized. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can take advantage of the Module 4 subsidy. The costs for drawing up the energy-saving concept and implementation support from an external energy consultant are also eligible for funding. The amortization period for the entire measure must be more than 2 years. Isdpfsw Eikvsx Ag Usht HOW MUCH FUNDING IS AVAILABLE? Up to: - 40 % of the costs - 900 € per t CO2 - 10 million € BAFA supports large companies with up to 30% (maximum €500 per tonne of ton of CO2 saved) and small and medium-sized companies with up to 40% (maximum €900 per ton of ton of CO2 saved) of the eligible costs. The maximum funding amounts to 10 million per investment project. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a permanent establishment or branch in Germany are eligible to apply. The planned measures must be carried out on the territory of the Federal Republic of Germany. A BAFA-approved energy consultant must be commissioned to draw up the obligatory energy-saving concept. HOW DO YOU APPLY FOR FUNDING? 01. list: Make a list of all appliances that are to be replaced and all appliances that are to be purchased. 02. check: We take the necessary data from you and check your funding amount provisionally. At the same time, we prepare a quotation for the new welding equipment. 03. energy consultant: We prepare all the data for you and pass it on to an energy consultant who works with us. This saves you time and money. 04. application: After checking the data, the energy consultant submits the application for funding on your behalf. 05. processing time: If it is urgent, we can speed up the processing of the application for you. for you. This reduces the processing time to approx. 10 to 15 days. The following MIG/MAG PULS welding machines from REHM are eligible for BAFA funding: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters Iedpjwa Uwdefx Ag Ueht - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: excellent (used), MIG MAG welder EWM 421 Progress puls with intermediate hose package (approx. 15 m) for sale. Isdpfsin Nllsx Ag Uoht 420 amp, water cooled Four-roll drive, also suitable for welding aluminum and chrome-nickel. The machine is in good condition and fully functional. MIG/MAG - impulse, MIG/MAG - standard and stick electrode - welding possible. Included are the welding torch and the ground cable.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. Ihodpfjvncubsx Ag Uet - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Iedpfjwf Rgxox Ag Ueht --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Format: 500x500mm Iedsgt Uplopfx Ag Usht

Condition: good (used), Water cooled TIG welder Kjellberg KU 262 Ijdpeg Tvvrjfx Ag Uoht Technical data see photos Instruction manual available

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters Isdpfevncfmox Ag Ujht - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg