Used Stretch Wrapping Machine for sale (64,888)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Ppodpfx Asykuiajcvop Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Podpfoykuhcex Acvepp Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON01, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size Podpfx Acsykuf Isvepp The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL Pedpoykud Dsfx Acvjpp 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Ppjdpfx Asykuddscvsp Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Pjdpfoykucysx Acvspp Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Pjdpoykucmsfx Acvopp Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Pedpfx Acjykub Ajvjpp All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Psdpfxsykubvj Acvopp Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 1997, condition: excellent (used), Ulma Superchik Stretch Wrapper 2 units available from 1996 and 1997 Pedpfx Aswnx Amjcvspp Regularly serviced and well maintained by the previous owner

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Psdpfxoxwyvqe Acvepp

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Ppjdpfx Ajyhc Dyocvep Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Year of construction: 2025, condition: new, MANUAL STRETCH WRAPPERS THE LATEST INCREDIBLE INNOVATIVE IDEA FROM ITALDIBIPACK TWO SYSTEMS, THREE SYSTEMS IN ONE JOLLY WORK LIFTER & STRETCH WRAPPER Thanks to the “TRANSFORMER” ® device, the lifter and pallet stacking assistant, Jolly Work, can be instantly transformed into stretch wrap without the need to attach or remove any parts. JOLLY WORK TO SAVE TIME, MONEY, PERFORMANCE AND HEALTH! Luckily Hercules has arrived... In terms of health and safety at work, manual lifting of heavy objects and manual wrapping of stretch film pose serious health risks. Jolly Work increases productivity and profitability of work, improves the result: it helps and enables stretch film wrapping of higher loads, and in the lifting version it is a great help in preparing the load. TECHNICAL SPECIFICATIONS TECHNICAL CHARACTERISTICS IN LIFTING MODE Dimensions of the lifting plate: 500 x 450 mm Maximum lifting weight: up to 50 kg with decreasing increments Maximum lifting height: 1500 mm / 50 kg Aluminum / wood lifting plate TECHNICAL FEATURES IN STRETCH WRAPPER MODE Standard film 23 microns / Pre-stretched film with 9-10-12-15 µm thickness Outer film roll diameter 105 mm Stretch film roll height 440/450 mm / 500 mm optional A maximum core holder height of 460 mm / 520 mm (500 mm film) Ppodpfemv Eixox Acvsp Inner core Ø: 50 mm Maximum pallet height: 2000 mm Adjustable film transport speed Regulation of stretch film tension by mechanical brake Quick-release system with the set brake level

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Podpfxox Ta Nxj Acvopp Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Condition: used, capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14 Podpfx Acsxytq Hsvopp Technical Details : working direction : left-right, rotative, clockwise capacity bph max. : 6000 labels : hot melt labels number of labelling stations : 1 number of bottle plates : 8 motor height adjustment : yes speed adjusment : frequence converter

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DETAILS: Control panel with 7'' color touch display Turntable / base frame Ø 1,500 mm Max. Pallet dimensions: 800 x 1,200 mm Max. Load capacity: 2000 kg Mast design Wrapping height (pallet included): 2,450 mm Height of turntable 75 mm Height query via light sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled film carriage speed up/down Fall protection for the film carriage Emergency stop switch in accordance with CE regulations Push button for switching on the machine and start & stop function in accordance with CE standards Ø 22 mm Signal tone at cycle start and at cycle end Indicator light integrated in the machine mast ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - Cross winding (up/down) F01 - 02 - Single winding (only up or only down) F01 - 03 - Winding cycle with preset start and stop height F01 - 04 - Fast wrapping cycle with limited or no film overlap) F01 - 05 - Layer wrapping cycle for increased film overlap F01 - 06 - Economy wrapping cycle (to save wraps) PARAMETERS CAN BE SET VIA THE CONTROL PANEL: 99 storable wrapping programs ! All function parameters can be set via the display Infinitely variable turntable speed 5-12 rpm Film carriage speed up and down independently adjustable from each other 1.3 up to 5.4 m/min Number of wraps at the pallet base (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Intermediate windings FILM CARRIAGE TYPE "PS" (POWER STRETCH) Motorized pre-stretching system with stepless adjustment Ppedetr Ut Ijpfx Acvjp Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick insertion system IEF for easy film roll change Film specification Max. Outer diameter Ø300 mm - Height = 500 mm - Core Ø76mm

Year of construction: 2025, condition: as good as new (ex-display), Degree of automation Automatic / fully automatic Ring diameter/inner diameter (mm) 450 Total machine length (mm) 2200 Total machine weight (kg) 320 Max rotation speed (RPM) 90 Supply voltage/voltage (V) 230 V 1Ph+N 50/60 H Ppsdpfx Acjn Ar T Djvjp Total installed power (kW) 0.75 Crown weight (kg) 12.3 kg Minimum. Packing / Minimum product (mm) 100x18x450 (with short partial bridge) Working pressure/pressure (bar) 6 Price includes training and instruction in our demonstration center. Free test of the material you have available Siede guide for additional costs

Condition: used, Pallet wrapper with rotation ring Pedpoxyty Ijfx Acvopp approx. 55 pallets per hour

Condition: new, Year of construction: 2025, - soft start / stop - pre-stretch tension - additional engine - height 2.4 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs Podper Hbflofx Acvspp - 230V power supply - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Year of construction: 2025, condition: new, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. Technical parameters: MASZT - Standard mast allows you to wrap a pallet up to 2400 mm high - depending on the model - Automatic return to the starting position - Top plate for additional stabilization of the pallet TABLE - Table diameter - 1650 mm - Max pallet dimension - 1200x1200 mm - Max weight of pallet - 2000 kg - Type of table: flat - Adjustable disc speed: 3-12 R.P.M. - Capacity: up to 30 pallets /1h. - Automatic return to the starting position - Powerful chain drive - Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m Pedpfx Acotpvbbevspp - Components from reputable companies including: PANASONIC, SIEMENS ADDITIONAL FEATURES - Very easy operation - Hour counter - Pallet counter - Cycle pause function - Stretching on head modes and not on pallet - Adjustable wrapping speeds

Condition: new, Year of construction: 2025, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. The new model - has a touchscreen control panel, menus in languages: Polish, German, English, French Technical parameters: MASH: - Height :2.4m TABLE Ppedpstpvbmefx Acvsp Table diameter - 1650 mm Max dimension of pallet - 1200x1200 mm Max weight of the pallet - 2000 kg Type of table: flat Adjustable disc speed: 3-12 R.P.M. Capacity: up to 30 pallets /1h. Automatic return to the starting position Powerful chain drive Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including PANASONIC photocell ADDITIONAL FUNCTIONS - Very easy operation - Working hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the pallet - Adjustable wrapping speeds

Year of construction: 2025, condition: new, - soft start / stop - pre-stretch tension - additional engine - height 2.1 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% Ppodpfx Acomuzutovep - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm Ppjdpfx Acjywg Rdevop 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. Psdpfsxd Dgyox Acvspp • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: good (used), 1 x Powder Packing Machine/Powder Depositor Model: AF-PP5 Pjdpfxoyt H Aqe Acvspp Range of pack: 1-1.5kg With weigher