Used Straight And Cut Machine for sale (88,338)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg Hedpfx Aaouuz Iij Eeg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Hjdswb Hxvopfx Aa Esg Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Vertical straight line bevelling machine BOTTERO Vision 907P Year of production: 2009 7 spindles Bevel height up to 55 mm Minimum glass size: 40 x 40 mm Hjdpfx Aaex Ecx Rj Eeg Water tank with pump included More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested Very little used Only 12600 working meters See video As is Available immediately

Condition: ready for operation (used), Can format can be round as well as oval or rectangular. Hodpevy Tt Ssfx Aa Ejg Suitable for food cans. Several sizes available.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Tecnau Roll to Cut&Stack’ paper cutting machine. Item for sale: Hedjw E Hcpepfx Aa Eog 1 x Tecnau Roll to Cut&Stack Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested and is fully functional. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), functionality: fully functional, Automatic machine for filling and sealing bags with liquid. Originally designed for aseptic filling and sealing of infusion bags. Five-nozzle filling machine. Process description: 1st station – Manual placement of the bag into the starwheel Hsdpfjw Ac Ebjx Aa Ejg 2nd station – Cutting open the filling port; the cut-off piece is removed by vacuum into a separate container 3rd station – Start of filling 4th station – Continued filling 5th station – Continued filling 6th station – Continued filling 7th station – Finalise filling 8th station – Sealing of the filling port 9th station – Ejection of the filled bag Filling is performed using overpressure through a central feed pipe. Each filling station is equipped with SIRAI valves that close a silicone filling tube (no moving parts in contact with the liquid, which facilitates cleaning and validation). Each individual filling station can be set on the control panel via timer (millisecond accuracy). Filling volume is adjustable from 100 to 3000 ml. The machine is constructed entirely from stainless steel 316, suitable for pharmaceutical production, and is mobile, mounted on wheels. The equipment is technically simple, easy to maintain, and highly compact (footprint less than 1 square metre).

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg Hedpfexbzimjx Aa Eeg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Condition: used, Year of construction: 2018, Marel concept 500 labelling machine - top and bottom labelling machine Hjdpfx Aasv Sp Ebj Eog

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: INSIDER FT2 700, total length: 150,000 mm, total height: 4,000 mm, Drilling machine with automatic loading and unloading of parts equipped with 1 destacker and 1 Aster type stacker. 4 drilling heads each equipped with 10 vertical drills in X and 10 vertical drills in Y. 2 horizontal drills in X and 2 horizontal drills in Y. 1 blade motor in X, 1 milling motor. Machine currently in production and available from December 1, 2025. Hsdpfx Aaowhkryo Eog

Year of construction: 2012, condition: used, We offer a Drobtech industrial poultry cut machine from 2012, designed for automatic portioning of chicken and other poultry parts. The machine is ideal for slaughterhouses, cutting plants and factories producing breaded and frozen products, ensuring consistent portion weights, high efficiency and reduced raw material waste. The cutter streamlines the cutting process, reduces labour intensity and improves the ergonomics of the production line. The device has a compact but long working line of 6.5 m. The machine complies with the hygiene requirements of the food industry. Technical data: Hjdpfxsx Aqp So Aa Ejg Manufacturer: Drobtech Type: DD-P/6 Machine type: divider / poultry portioning line Year of manufacture: 2012 No.: 03/01/03/12 Installed power: 1.1 kW Weight: 245 kg Dimensions: 6500 x 1350 x 2100 mm The Drobtech DD-P/6 poultry cutting machine is an excellent solution for plants that want to automate portioning, increase production efficiency and achieve uniform quality of finished poultry products at low operating costs.

Condition: excellent (used), Year of construction: 2001, Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Hjdpfx Aor Ti Nbsa Ejg Front cutting unit via upper and lower knives

Condition: excellent (used), LiSEC TAL is a hydraulic sealant applicator for two-component materials, with an adjustable mixing ratio, which is used for the production of insulating glass. Customs tariff number for 2K extruder: 84772000 S-IGL-1862 / - Online - / Lisec / TAL 50 PU / to be reconditioned / GMR Stock S-IGL-2329 / - Online - / Lisec / TAL-60 SI/N / Construction Year: / TAL 60 SI TAL 60 PS / GMR Stock Hjdpfov Epfzjx Aa Eog

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Hodpfx Aaexu Hvls Eog Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Hedpedzp T Dofx Aa Eeg Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Hjdehwrp Repfx Aa Eog Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Year of construction: 2012, condition: as good as new (ex-display), 2nd hand Fill and seal machine, VI-500 - Format : True Quad (Stabilo) bag wide, 200 mm breit x 100 deep, the machine was never in use in consequence the machine has zero working hours Also for sale: fill and seal machine - VI-250 - Format : 50 mm wide Hjdpfx Aaoff Hucj Eeg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Hsdpfoxt Hz Ssx Aa Esg Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: Hedpeiy N I Isfx Aa Ejg - straightening (rolls diameters 70 mm) - slitting (max 7 slitting knives) - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Center height: 180 mm Hsdsrvybtspfx Aa Eog Headstock Counter holder with pressure cylinder

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium CNC Control Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Hedpfx Ajw D Accoa Ejg automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 2 with fine adjustment 1. saw cut aggregate Random System: saw cut optics 2. brush : Tynex brush, grain 80, diameter 220mm Height adjustment : Handwheel height indication: mechanical counter Feed rate: 4 - 12 m/min Motor power saw-roughness: 1,1 kW Motor power brushes: 3 kW Motor power feed: 0,37 kW Machine length: 1400mm Hsdpfxegrlade Aa Eeg machine width: 1400mm Weight: 550kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Hodjt I Dtnopfx Aa Esg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! Hodev S Ua Dspfx Aa Eog We are also happy to offer commissioning and training on the machine.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged wire EDM with automatic wire threading With automatic, two-sided lowering tank Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (for use with 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be thoroughly cleaned, reconditioned, and extensively tested after order placement. A laser measurement of the axes will be performed at our facility. We are also happy to carry out a customized test on the CUT 3000 for you. Hsdpfx Aowprq Tea Esg Operator training at Techma on your reconditioned machine included Optional extras available: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of manufacture 2013 Hjdpfxswmmvls Aa Eeg Control system: HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Including option for large wire reel of 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is kept in our warehouse and will be cleaned, overhauled, and tested for all functions upon receipt of the order. Optional: - Commissioning of the machine at your premises - On-site training - Cooling unit - Transport - Clamping bar set