Used Stp 3 for sale (31,999)

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hsdpfx Aoxcdg Dsaconu

Condition: new, pressure 200 t chamfer lenght 3100 mm Hjdpexaalwefx Aacjnu distance between columns 2600 mm column arm 250 mm ram stroke speed 100 mm/sec return speed 75,0 mm/sec work speed 7,0 mm/min work stroke 180 mm dayligth 415 mm oil volume 200 ltr. table height 900 mm voltage 400 Volt range L-W-H 4450x2050x2650 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Hnedpfev Sag Nex Aacju Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 189,091 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 09/2010, loading space length: 6,100 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 8 m³, emission class: euro5, color: white, number of seats: 3, total length: 8,050 mm, total width: 2,550 mm, total height: 3,510 mm, Equipment: ABS, Platform body with aluminum side walls, one side wall divisible, 500 mm high, anti-slip screen printed floor, 7 lashing eyes per side, ABS, engine brake with constant throttle, heated and electrically adjustable exterior mirrors, front maneuvering mirror, electric window lifters for driver and passenger doors, standard driver's air suspension seat, double passenger seat, roof hatch, roof spoiler, air suspension with lift/lower function on rear axle, rectangular plastic tank approx. 100 liters, trailer coupling. Vehicle may have advertising stickers and/or lettering applied. Our offer is generally without a new roadworthiness inspection. If a new inspection is required, we can provide an offer from our partner workshops. Vehicle may have advertising stickers and/or lettering applied. Our general terms and conditions of delivery and payment apply. We are pleased to prepare a finance or leasing offer for this item. Please contact us! Hsdpfxsxa Tk Hs Aaconu

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom. Hedpfx Aajwhm Sijcjnu

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Filling machine: - Ampack Ammann KF 2/3 rotary filler Hnjdpfx Ajxgpzhoaceu - Output: up to 30 cycles/minute Formats: - Round cups: Ø 95 mm (3 cups per cycle) - Round cups: Ø 86 mm (3 cups per cycle) - Square cups: 85 x 85 mm (3 cups per cycle) - Square cups: 115 x 115 mm (2 cups per cycle) - Square cups: 119 x 119 mm (2 cups per cycle) - Year of manufacture: 1999 - Features: H₂O₂ cup sterilization, servo sealing station, Siemens S5 control system Packer: - Ampack Ammann ASGP4 - Fully synchronized with the filler - Year of manufacture: 1999 - Upgraded with Siemens S7-1500 control in 2020 Snap-on lid applicator: - SEMA Maschinenbau GmbH - Capacity: up to 6,840 cups/hour (95 mm cups, 3 units) - Year of manufacture: 2014 - Siemens S7-300 control Tray erector: - SEMA Maschinenbau GmbH - Capacity: up to 35 cycles/minute - Year of manufacture: 2013 - Siemens S7-300 control General information: - The line is currently in operation and can be inspected upon request. - Condition: the overall condition is very good.

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hjdpfx Asxcdf Tjacsnu Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Hodpevgnm Hsfx Aacenu Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Hjdoxaz Igjpfx Aacenu Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: good (used), Year of construction: 1990, Manufacturer: SBM Including subframe, electric motor (approx. 50 kW), and grinding track Immediately available Jaw opening: approx. 465 x 210 mm Hnsdpowt Axvofx Aaceu With construction as shown

Condition: good (used), axle configuration: > 3 axles, wheelbase: 7,970 mm, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, first registration: 03/2007, suspension: air, color: other, tire size: 275/70-R22.5, Year of construction: 2007, Equipment: ABS, = Additional options and equipment = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication = Notes = Hsdpfewt Db Ssx Aacenu Well-maintained 2007 NOOTEBOOM OVB-73-04 4-axle ballast semitrailer, axles 2, 3, and 4 are hydraulically steered (incl. cabled remote control), BPW axles with drum brakes, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication system, 3'' kingpin, air suspension, unladen weight: 11,620 kg, gross vehicle weight rating: 71,400 kg, twin tyres with 275/70-R22.5 tyres (Left: 10/13, 13/13, 14/14, 7/7 mm; Right: 10/7, 14/14, 13/12, 11/12 mm), Belgian registration with valid technical inspection until 25.03.2026 = Additional information = Axle configuration Tyre size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tyres; max. axle load: 11,600 kg; tyre tread depth left inner: 65%; left outer: 80%; right inner: 65%; right outer: 45% Rear axle 2: twin tyres; max. axle load: 11,600 kg; steered; tyre tread depth left inner: 80%; left outer: 80%; right inner: 90%; right outer: 90% Rear axle 3: twin tyres; max. axle load: 11,600 kg; steered; tyre tread depth left inner: 90%; left outer: 90%; right inner: 75%; right outer: 80% Rear axle 4: twin tyres; max. axle load: 11,600 kg; steered; tyre tread depth left inner: 45%; left outer: 45%; right inner: 70%; right outer: 75% Dimensions Dimensions (L x W x H): 1323 x 252 x 260 cm Weights Unladen weight: 11,620 kg Payload: 59,780 kg Gross weight: 71,400 kg Maintenance, history, and condition Technical inspection (APK): valid until 03/2026 Technical condition: very good Visual condition: average

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Hnjdpfjwb Erzjx Aacou

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Hnjdjxcdgqspfx Aacju Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, mileage: 164,443 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 07/2011, loading space length: 3,805 mm, loading space width: 2,305 mm, loading space height: 400 mm, loading space volume: 4 m³, emission class: euro5, color: white, number of seats: 3, total length: 5,837 mm, total width: 2,450 mm, total height: 2,633 mm, Equipment: ABS, Meiller 3-way tipper body, ABS, differential lock on rear axle, engine brake, heated and electrically adjustable exterior mirrors, roof hatch, standard driver's air-suspension seat, middle seat, rear window, leaf spring suspension, Ringfeder trailer coupling. Vehicle may be stickered/labelled with advertising. Hedpfx Aasxaitkocsnu Our offer is generally without a new MOT (TÜV) inspection. If a new MOT inspection is required, we are happy to provide you with an offer from our partner workshops! Vehicle may be stickered/labelled with advertising. Our general delivery and payment terms apply. We are happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: reconditioned (used), functionality: fully functional, Dough Divider and Moulding Machine Fortuna Roll Press Size 3 Semi-automatic, 30-piece Dividing head NEWLY overhauled Stainless steel blade NEW Dough input up to 2550g, depending on dough hydration (TA) Pieces from 35 to 70g round / 85g square Connection: 400V, 16A CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Hnodpfx Aaew Hn H Socou Refurbished used machine with warranty Option: Stainless steel platform Brand new moulding plate Service package Maintenance contract Instruction & commissioning Delivery service Try our exclusive service for you!

Condition: good (used), Manufacturer: SBM Including base frame, electric motor (approx. 50 kW) and grinding track Hnjdpfx Aew Acfheacou Jaw opening: approx. 465 x 210 mm Immediately available

Year of construction: 2005, condition: good (used), All parts shown by hand not come. VAT not included in price. Hodpjd N I Ezsfx Aacenu

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW Hnedpfxjd Rbz To Aacsu below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Hnsdpoxcdfgefx Aacou Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: good (used), Year of construction: 1980, machine/vehicle number: 80517036, Offer 24304 Hnodpfxet Dz Uuo Aacju Technical data: - max. cutting width 1540 mm - max. cutting capacity at 45 Kp/mm² 3.5 mm - Cutting angle - stroke rate up to 58 /min - Front angle stop - 2 front support arms - Back fence adjustable by handwheel - E - foot switch - Drive 400 V / 4.0 kW - Space requirement approx. W 2300 x H 1250 x D 1700 mm - Weight approx. 1.5 t

Condition: reconditioned (used), functionality: fully functional, Dough Divider and Rounder Fortuna Bun Divider Rounder, Size 3 Semi-automatic 30-piece Dividing Head NEWLY refurbished Stainless Steel Blade NEW Dough input up to 2550g Pieces from 35 to 70g/85g Capacity max. 7,000 pieces/hour Connection 400V, 16A CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine Option: Stainless Steel Platform New Rounding Plate Hodpfxjw Hn Ivj Aacenu Service Package Maintenance Contract Commissioning & Training Delivery Service Are you already familiar with our exclusive service?

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm Hodpfxo Dq Ads Aacjnu depth 1600 mm height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high weight: 500 kg

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hedpjxcdfasfx Aaconu

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, Dough divider and rounder, roll press TOP model Fortuna Automat Gr. 3+ with rounding function deactivation, safety guard with protective corners, electrically operated rear head cleaning, dividing head with NEW stainless steel knife, dough input up to 2400g depending on hydration, dough divider with 3 new rounding plates, connection 400V, 16A-CEE plug. Dimensions: 720 x 800 x 1510 mm (W x D x H). Refurbished used machine with warranty and spare parts service. Options: Platform or mobile frame Rounding plates Service package Delivery service Maintenance contract Hnsdpfx Aasw Hvygocou E-Box Commissioning and training

Year of construction: 1990, condition: ready for operation (used), machine/vehicle number: 350119, table mounting size: 350 x 700 mm x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm Hsdjgq Dclspfx Aacjnu weight: ca. 1700 kg