Used Stone Forceps for sale (1,022)

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg Dwedswcl Ulopfx Abvjb IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t Dwodpfx Ajncfpbobvob polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons negotiation on site always in French, English by appointment or by e-mail translator

Condition: good (used), Horizontal resaw, capacity 600mm wide x 150mm thick. In good working condition. Machine dismantled and loaded on truck. Can be seen running. Contact by telephone in French, or by email in your language. Djdpfjxb D D Hjx Abvswb

Year of construction: 1978, condition: ready for operation (used), A completely overhauled Kleemann large-format screening plant for the mining and recycling industry is available. Screening decks: 2, screen width: 1800mm, screen length: 5200mm, screening area per deck: 9.36m², total screening area: 18.72m². Overhaul: springs, base frame, cardan shaft, tensioning devices and electric motor. An on-site inspection is possible. Dsdpozb Nktsfx Abvjwb

Condition: excellent (used), I will sell a stone or granite splitter. - serviced, no leaks in very good condition. For sale: Obolith Steinwerke GmbH - semi-automatic press with roller conveyor I offer a more advanced hydraulic press with automatic collection by roller conveyor, ideal for serial production of precast concrete elements. Specification: • Manufacturer: Obolith Steinwerke GmbH • Model: With roller conveyor • Company inscription: “Stein-reich an Ideen” • Foot operation (start pedal) Dwsdpewpxzfjfx Abvjb • Safety switch and external controller • Electric-hydraulic drive • Solid frame, designed for intensive use Ideal for automation of block, hollow block, curb production processes.

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 15,900 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping •Hydraulic setting system Dwodpfxszhbbce Abvob TECHNICAL SPECIFICATIONS • Model: FABO PDK-100 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1000 mm • Max Feeding: 600 mm • Capacity: 150-200 TPH • Motor Power: Heavy duty GAMAK,200 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 15900 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Dsdpfx Abjy N Rlvovewb The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: new, functionality: fully functional, color: other, overall weight: 42,000 kg, Year of construction: 2026, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. Dwedsziba Uepfx Abvjb FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Year of construction: 2007, condition: used, functionality: fully functional, Hello, we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Dwsdpfx Aboym Uubovjb Best regards,

Condition: used, Applicable material: Concrete Dwsdpox I Erhefx Abvjb

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. Dwjdszg Dgxjpfx Abvsb • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm Dwodpfxezzmqps Abvob With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very well maintained condition

Condition: used, functionality: fully functional, 🏗️ FOR SALE: ILMAR Rapide 1250 Block and Paving Machine (Used) Excellent opportunity to expand or modernize your precast concrete production with a domestically manufactured machine (ILMAR), recognized for its robustness, reliability, and low maintenance costs. The ILMAR Rapide 1250 is a fully automatic industrial unit, ideal for high-volume production of a wide range of products with premium finishes. Dsdpfezgv Iuox Abvswb 📊 Technical Specifications and Capabilities Production Versatility: Produces blocks (standard and hollow), paving stones, road kerbs, and decorative pieces. Adjustable Heights: Capable of producing pieces with heights ranging from 5 to 30 cm. Bi-Layer Option: Perfect for paving stones with differentiated color or texture finishes. High-Strength Structure: Designed to withstand demanding compaction and industrial vibration cycles. 🔍 Equipment Condition: Used, in the mechanical and visual condition visible in the photos. This robust equipment is ideal for those seeking high productivity with an initial investment significantly lower than that of a new machine.

Condition: excellent (used), Year of construction: 1999, Jung C-740-C year of construction: 1999 control: siemens magnet: 700 x 400 mm max. grinding range: 880 x 460 x 550 mm ( x,z,y) magnet variable attraction force variable speed: 1500-3500 rpm max. load on the table: 800 kg top clamp Dwedpfxju I Rtie Abvsb bottom clamp 2x remote control balancer various grinding stones documentation machine is under power for inspection

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Dedsy En Dnspfx Abvswb Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH tertiary impact crusher is an advanced crushing machine that provides high efficiency in rock crushing and sand making processes. It delivers superior performance, especially in crushing medium-hardness materials with low abrasive properties. This machine stands out with its ability to produce fine, cubic-shaped material down to 0.5 mm in a single pass. It is an ideal choice for producing high-quality aggregate in sectors such as construction, ready-mix concrete production, and asphalt applications. Tertiary crushers ensure that the material is produced in homogeneous sizes during the crushing process and enable more efficient utilization of the material thanks to their high reduction ratio. With these features, the CONSTMACH tertiary crusher is also frequently preferred as a “sand making machine” in stone crushing plants. Thanks to its high-speed rotating rotor system and adjustable crusher plates, the material can be crushed to the desired fineness. The hydraulic opening and adjustment mechanism allows operators to perform maintenance and replacement operations safely and quickly. Replaceable wear parts ensure long-term use and low operating costs. Furthermore, its design, suitable for operation in closed-circuit systems, provides consistent quality across different product sizes. Tertiary Crusher Technical Specifications Dedpfxoxpvb Ho Abvowb MODEL: CTC - 1275 Rotor Diameter: 1,100 x 750 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 100 mm Capacity: 60 - 80 t/h Motor Power: 110 kW Weight: 9,500 kg MODEL: CTC - 1210 Rotor Diameter: 1,100 x 1,000 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 120 mm Capacity: 80 - 135 t/h Motor Power: 160 kW Weight: 12,500 kg MODEL: CTC - 1212 Rotor Diameter: 1,100 x 1,200 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 120 - 170 t/h Motor Power: 200 kW Weight: 15,500 kg MODEL: CTC - 1215 Rotor Diameter: 1,100 x 1,500 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 230 - 250 t/h Motor Power: 250 kW Weight: 18,500 kg Why Choose CONSTMACH Tertiary Crushers CONSTMACH offers reliable solutions in crushing, screening, and concrete production equipment that meet international standards. Our tertiary impact crushers increase your operation's production efficiency with high quality, durability, and low maintenance costs. We are always by your side during the after-sales process with our spare parts and technical support services. If you are looking for a long-lasting, energy-efficient, and high-performance stone crushing machine, CONSTMACH is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), functionality: fully functional, overall weight: 250 kg, Year of construction: 1995, Kinshofer Grapple 605-200 / Loading Crane • Manufacturer: Kinshofer Grapple Technology GmbH • Type: 605-200 multi-purpose or shell grapple • Year of manufacture: 1995 Dwodpfx Asy Taqisbvob • Hydraulic grapple for loading crane • Used for gripping and moving materials • Areas of application: scrap metal; logs; stones; demolition material; recycling material • Load capacity: 3000 kg • Weight: 250 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: new, Empty weight: 176.000 kg Dimensions (LxBxH): 1500 x 1500 x 4 cm Cargo space capacity: 2.200.000 l Wall thickness: 10 mm Thickness of end walls: 8 mm Thickness of partition walls: 6 Number of fillers: 2 = Additional options and accessories = - Originally painted = Remarks = Djdpfxjx D Dgyo Abvowb 1. SILO CAPACITY: 3.000 TONNES 2. SILO HEIGHT: 35 000 mm 3. SİLO DIAMETER: Ø 12.400 mm 4. QUANTITY OF SILO LEGS: 7 5. SILO OUTPUT DIAMETER: Ø 400 mm 7. SILO WEIGHT: 176.000 kg 8. MATERIAL OF SILO LEGS: Ø273 x 20 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 160 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 10 mm SHEET METAL 13. SILO BODY MATERIAL: ST -37, 10 - 8 - 6 -5mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 5 mm SHEET METAL. 15. INNER MAN HOLE IS INCLUDED. 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: used, Industrial vibratory classifying screen, vibrating screen, two-deck screening machine, Binder+Co WS 1300, Used Machine Manufacturer / Brand: Binder+Co AG (Gleisdorf, Austria) Type: WS 1300 Serial No.: S 2035 Order No.: 20 235/20 Year of Manufacture: 1992 Design: Robust two-deck steel construction with upper dust protection cover featuring a dust extraction connection. Drive: Cardan shaft drive / power transmission between the drive motor and the eccentric shaft. Accessories: 4 heavy-duty vibration-damping rubber mounts for the spring/suspension mounting points. SCREEN DECKS: Upper deck: Bar screen with approx. 12 mm bar spacing, suitable for coarse screening. Lower deck: Square-mesh screen with approx. 12 × 12 mm aperture size, suitable for fine screening. APPLICATION: Ideally suited for the accurate separation and classification of gravel, sand, stone, coal, recycled materials, scrap metal, and other bulk industrial materials according to particle size. OVERALL DIMENSIONS: Width: 3300 mm Depth: 2130 mm Height: 1440 mm Djdpfjzxd Tcsx Abvowb Weight: 2300 kg

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Dodpfjxdi Agjx Abvswb

Condition: new, Year of construction: 2004, New heat exchanger Brembana Construzioni Industrial, year 2004, drawings included. Dwsdpfxsvwbh So Abveb

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-300 is big efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: Hopper with Apron Feeder: 6 m3 Production Capacity: 220-340 Tons Per Hour Crusher Type: Cone Crusher Maximum Feeding Size: 225mm Vibrating Screen Size and Deck: 2200x5500mm 3-4 decks Total Motor Power: 300 kW MCC-300 is a combination of: • Apron Feeder Dwodpfx Aey S Akvebvob • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Plate dimensions: Length: 1200mm Width: 800mm Height: 160mm Height from the floor to the top edge of the plate: 860mm Center height: 200mm Dwsdpfx Abozuxt Novsb Flatness: DIN 876, accuracy class: 1

Condition: excellent (used), mileage: 378,848 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 10x8, wheelbase: 7,160 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,100 mm, total width: 2,520 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, power assisted steering, power mirror, traction control, - 4x4 - Aluminum fuel tank - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Refrigerator - Air horn - Rotating beacon - Rear view camera - Sun visor - Tool box - Power take-off (PTO) - Central lubrication system Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 19,580 kg Payload: 30,420 kg Gross vehicle weight (GVW): 50,000 kg Functional Body brand: RHINO AO KIPPER MET KLEPPEN 24.5 M3 Dumper: Rear Maintenance, history and condition APK (Technical Inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good Identification License plate: 39-BNL-5 MAN TGS 50.500 10x8 BLH WS + RHINO 24.5 M³ HARDOX REAR DUMPER First registration: 08.04.2019 License plate: 39-BNL-6 Mileage: 378,848 km Drive: 10x8 Power: 500 hp Transmission: Automatic Cab: Day cab HU / APK valid until: 06-2027 Available: 2 identical vehicles For sale is an exceptionally robust and well-maintained MAN TGS 50.500 10x8 BLH WS 5-axle vehicle, equipped with a rugged RHINO 24.5 m³ rear dumper made of HARDOX steel. This vehicle was specifically designed for the most demanding tasks in the construction, earthmoving and transport sectors. Thanks to the powerful 500 hp engine, the 10x8 drive, the large wheels, and the hydraulically suspended and steered rear axles, this MAN offers excellent traction and maneuverability – even under difficult operating conditions. CHASSIS & DRIVE * MAN TGS 50.500 * 5-axle * 10x8 drive * 500 hp * Automatic transmission * Large wheels / heavy-duty off-road design * Rear axles hydraulically suspended * Rear axle hydraulically steered * Very good traction in off-road conditions * High maneuverability despite 5-axle chassis * Central lubrication system * DIN mounting plate at the front of the vehicle * Rotating beacons RHINO 24.5 M³ HARDOX REAR DUMPER The vehicle is equipped with a very robust RHINO rear dumper. * Volume approx. 24.5 m³ * Rear dumper * Tipping body made of wear-resistant HARDOX steel * Very robust and durable construction * Aluminum covers * Designed for heavy and intensive use * Ideal for earth, sand, rubble, stones and other heavy bulk materials Dsdpfozzn Ezjx Abvswb The combination of the heavy 10x8 chassis and the robust HARDOX tipping body makes this vehicle an excellent machine for demanding construction and earthmoving work. CAB & EQUIPMENT * MAN day cab * Air conditioning * Automatic transmission * Comfortable driver's workstation * Rotating beacons * Central lubrication system * DIN mounting plate at the front CONDITION The vehicle is in exceptionally good, clean and original condition.

Condition: good (used), RAFFIN gooseneck press 70 Tons Capacity 600mmx300 Good overall condition Machine dismantled, loading onto truck. Contact by phone in French, by email in your language. Dwedpfx Aboxb D Hhovsb