Used Steel Hall for sale (17,820)

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank Kdodpfjyhnn Rox Adqer 500l speed 23 rpm date of production 2024.12 used 3-4 times only

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Kdodpou A U Utsfx Adqor

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Round: 45mm Square:45mm Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs Kdjdpfjzux N Rox Adqjr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Kdedpoy Sz Rusfx Adqer Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: used, Winkworth PV500 Mixing Tank with Load Cell Weighing Kodpswq Sn Uofx Adqedr Capacity 500 LTS Stainless Steel Jacketed Load weighing Cells With Ancillary Equipment

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Kdjdpowq Sdiefx Adqjr Capacity 1000 Lts Complete with Winkworth mixer and ancillary equipment

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Ksdpfot Rv Naex Adqedr

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: Solomat, Solomat / Donati / Demag hall crane, portal crane, bridge crane including floor-mounted guide rails Dimensions of the steel structure: approximately 26 x 13m with 1x Demag bridge crane 2.5t - gauge 12.9m Kdsdpfezhik Eex Adqor Useful load/lifting capacity: 2000KG - 2t Technical data of the system: Length of guide rails including power supply: approximately 26m Overall width, outer edge: approximately 13.1m Total crane height: approximately 3.9m Top of bridge: approximately 3.9m Bottom of bridge: approximately 3.6m Hook height: approximately 3m Gauge: 12.9m Crane girder: HEA340 Carriages: HEA180 The system will be delivered complete: - 1 bridge with a 2000kg Donati chain hoist with floor control including carriages and steel structure - Control system including Demag DRS 125 wheel blocks including drive - Guide rails and power supply The crane is dismantled and immediately available Inspection record and CE certification are available The location of the item is 75053 Gondelsheim Very good condition, see pictures. Hardly any operating hours! Shipping by freight forwarder or collection only by prior arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Kdsdpfxezu Rpio Adqor Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Kedpfxezn Nmyj Adqedr

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Kdjdeziu Hzepfx Adqsr Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: like new (used), Year of construction: 2022, We offer the NOWICKI TYPHOON 90 KN-90 high-speed bowl cutter 2022 – a professional machine for the production of meat stuffing, fat emulsions, raw peel mashes, as well as vegetarian products and pet food. This is a modern TYPHOON series bowl cutter, designed for use in meat, fish, fruit and vegetable processing plants and ready-made meal production, where very fine grinding, uniform product structure and high process repeatability are important. The KN-90 cutter is equipped with a 90 l bowl and a high-performance knife system, which at high rotational speeds allows for ‘cutting in the air’, so that the stuffing does not overheat and retains the desired structure and colour. Stuffing mixing system through reverse rotation back. The electronically controlled drive allows for precise adjustment of the knife shaft and mixing speed, while the touch screen control panel facilitates operation and storage of ready-made technological programmes. The cutter has compact dimensions of 2200 x 1600 x 1630 mm, and the separate electrical cabinet has dimensions of 1000 x 500 x 1500 mm, which facilitates the installation of the set in an existing production hall. The robust, heavy-duty construction, made of stainless steel, meets the hygiene requirements of the modern food industry. Technical data: Manufacturer: NOMA Nowicki Machinery Series: TYPHOON 90, Type: KN-90 Year of manufacture: 2022 Bowl capacity: 90 l Power supply: 3×400 V, 50 Hz Power: 39 kW Rated current: 91 A Cutter dimensions: 2200 x 1600 x 1630 mm Electrical cabinet dimensions: 1000 x 500 x 1500 mm Advantages of the NOWICKI TYPHOON 90 KN-90 high-speed cutter: High-speed cutting system – very fine grinding of stuffing and emulsion with short processing time. Homogeneous product structure – the optimal shape of the bowl and the operation of the knives ensure a smooth, repeatable consistency of meat, vegetable and pet food stuffing. Modern control – touch panel, possibility to save technological programmes, full control over speeds and processing time. Universal application – red meat, poultry, fish, vegetables, fruit, plant products and animal feed. Kdjdpfox H St Aex Adqjr Construction – solid steel frame adapted to intensive work in industrial conditions.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Kedpfsq U Sa Sex Adqodr Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request Kdjdpfx Adszhkmueqsr The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers Kdodpfx Adevmbzwoqor radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Kdjdjzvgdlepfx Adqer Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW Kdsdsx Tii Iepfx Adqor - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary. Kdjdpfx Adeywzhkoqjr

Condition: used, Steel floor plates Kjdpfx Aszmw Iijdqjdr Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Jacketed Stainless Steel Year 2012 Ksdpfx Aowq Slasdqodr With ancillary equipment

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available Ksdpfx Adeygkineqedr - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Ksdpfx Aewb A Hijdqjdr Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Mesh Belt Conveyor Stainless Steel Belt dimensions 1600mm x 600mm Kdodpfx Ajiu H Sdsdqjr Control box with stop/start, variable speed control, manual / automatic switch Underneath tray collection facility In excellent condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. Kdodozrf Saopfx Adqor All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a HEINEN Spiral Freezer industrial spiral freezer with an original Control Cabinet, manufactured in 2017. This modern device is designed for rapid freezing of food products – ideal for meat, poultry, fish, and bakery plants, as well as ready-made meal producers. The spiral freezer allows for high efficiency with a small footprint, thanks to a multi-level spiral conveyor belt. Kdsdpfeyibfvsx Adqer The HEINEN Spiral Freezer operates at 3×400 V, 50 Hz, with a rated current of 63 A. The advanced Control Cabinet allows for precise setting of freezing parameters, control of temperatures, belt speed, and product dwell time in the spiral tunnel. This makes it easy to adapt the process to different product ranges – from individual portions of meat or poultry fillets, through burgers, nuggets and fish, to bread, cakes and ready meals. The HEINEN spiral freezer ensures fast, even freezing, which translates into better product structure, less weight loss, and higher quality after thawing. The stainless steel construction facilitates cleaning and meets the hygiene requirements of the food industry. Technical data: Manufacturer: HEINEN Model/name: Spiral Freezer Type: Control Cabinet Year of manufacture: 2017 Power supply: 3×400 V, 50 Hz Rated current: 63 A Application: rapid freezing of meat, poultry, fish, bread, desserts, ready meals Belt width: 400 mm Number of levels: 18 Product entry height: 2900 mm Product exit height: 700 mm Width between levels: 65 mm Advantages of the HEINEN spiral freezer: High efficiency with a small footprint – the spiral belt allows for long freezing times in a small hall area. Repeatable freezing parameters – the precise Control Cabinet from 2017 guarantees a stable process. Flexibility of use – suitable for freezing a wide range of food products. Better product quality – rapid freezing reduces juice leakage and preserves structure and taste. Stainless steel construction – easy to clean, high hygiene and long service life in industrial use.