Used Steam Turbine for sale (1,115)

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * 2 units in stock * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Power boom EVO Power ARM Gen2 Dsdpsz I Ic Defx Adheku * 2 x turbine * Turbine operating hours: 1,058 h * Compressor operating hours: 943 h * DINO 12m³ container * Stainless steel lining, complete * Power boom EVO-POWER ARM GEN2 * Rotating suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Biodegradable hydraulic oil * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the power boom * Light package III: LED light strips in the toolbox * Light package IV: Cable reel * Light package VIII: Light bar on the rear * 4 flashing beacons (switchable on the rear) * Anti-slip coating on the lid * Ball-head trailer coupling 3.5t * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Dsdpfxezdrufo Adhoku

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. Dkjdpszxc Dmjfx Adhju The controls are excluded.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Dodez Ibdujpfx Adhoku Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: used, Year of construction: 2007, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. It is used for degreasing metal components contaminated with oil and chips from mechanical machining. Applicable solvents: modified alcohols Hydrocarbons, Class AIII (flash point > 55° C) Ultrasonic power: 1000 W, 30 kHz Vacuum pump: Busch, 2 years old Good condition The complete control system was upgraded to S7 four years ago. Total maintenance costs exceed EUR 40,000. Spare parts: solvent pump, 2x heating registers, complete rotating basket assembly Various seals System process: spray, immersion, ultrasonic, and steam degreasing, including vacuum drying. Data: Basket dimensions: 530 x 320 x 200 h mm Maximum load weight: 50 kg Average batches per hour: up to 5 Electrical connection: 29 kW Solvent volume: approx. 370 liters Djdpfxjhg Ugie Adhoku

Condition: refurbished (used), Year of construction: 2014, working width: 650 mm, area performance: 3,200 m²/h, warranty duration: 6 months, tank capacity: 70 l, water tank capacity: 70 l, year of last overhaul: 2026, Hako Scrubmaster B70 CL Completely refurbished scrubber-dryer with new batteries, new suction turbine, and much more – comes with a 6-month warranty and a new DGUV V3 electrical inspection including inspection report. Working width without squeegee: 65 cm Dedpfotthfvox Adhsku Working width with squeegee: 95 cm Maximum area performance: 3,200 m²/h Fresh water tank: 72 L Recovery tank: 74 L Traction drive: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL batteries Installed new parts / repairs carried out: - 24V 600W suction motor – new - 4 x 6V 180 Ah GEL batteries – new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses – new - Disc brushes – new - ACLA rubber wheels – new - Suction lips – new - Fresh water filter – new Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, warranty duration: 6 months, input voltage: 24 V, total width: 510 mm, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, year of last overhaul: 2026, empty load weight: 185 kg, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) Dkedpfeyanpfex Adheu In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: good (used), Year of construction: 2003, Wampfler GS 21ML/LT Slip Ring Assembly GS 21 Technical Details: Dkedpsxl Avpefx Adheu • Manufacturer: Wampfler • Type: GS 21ML/LT • Year of Manufacture: 2003 • Protection Class: IP54 • Configuration: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Application: Slip ring assembly for the safe transmission of power and signals in rotating applications, including: • Crane systems • Lifting and conveying technology • Wind turbines • Mechanical engineering Condition: Used (see images). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Auriol M500VBEX cooking kettle Dkedpfx Asnbd S Tsdheu Serial: 3429 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Year of construction: 2016, condition: good (used), Retigo O611ic Combi oven Dsdpfx Adsrywxkoheku 2016, RP series, Stainless combi oven, electric, 10Kw, with steam, with 7 trays, adjustable timer and temperature controls, mounted on tray rack, 1Ph

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles Dsdpfx Ajzkkp Ijdheku - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: used, Year of construction: 2018, Overview  This semi-automatic 20 hL brewing system was manufactured in 2018 and is equipped with a steam-powered heating system. It includes a complete brewhouse, a steam generator, a CIP station, fermentation tanks and a KEG cleaning system. Technical details  - Wort yield: 20 hL per brew - Control: Semi-automatic - Heating: Steam Scope of delivery  - Steam generator | Certuss | Junior TC-300 | 2018 - Capacity: 300 kg/h Dedpfsvy U Drjx Adhjku - Including water treatment plant - Brewhouse | SKRLJ DOO | BH-3 | 2018 - Mash & lauter tun - Kettle - Whirlpool - Hot water tank | 4.586 L | steam heated jacket - Cold water tank | 4.400 L | glycol cooled jacket - 2 stage heat exchanger - Grist bin 500kg - Semi-automatic CIP station | SKRLJ DOO | CIP 2x500L | 2018 - 500 Litre Acid tank - 500 Litre Caustic tank insulated, electric heating - 1x sanitary centrifugal pump - PLC for pump/temperature control - Full stainless steel construction - Keg washer | SIFA | Idrokeg 21 | 2020 - 12 KEGs/ h - 2 cleaning stations - Semit-automatic - Steam heated - 2x S-Type heads - Malt mill | Robix | RX-600 | 2018 - Capacity: 600 kg/h  

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Dkodpfx Adeyb Sxashsu Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: used, Year of construction: 2020, Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  - Capacity: 10 hL brewhouse, up to 2 batches per day - Formats: Beer, up to 20° Plato initial density - Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) - Power supply: 5.5 kW Dksdpfsxb S A Dex Adhou - Air supply: 6 bar - Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra ≤ 0.4 μm) - Heating: Steam - Features: CIP rotary ball, sparging arm, thermowell, motor with frequency conversion, grain raker, top manhole with sight glass, laser-cut false bottom, side grain door and chute, adjustable legs Scope of Delivery  - Brewhouse 10 hL | Shandong Yuesheng | 1000L | 2020 | 2 vessels (mash/lauter, kettle/whirlpool) - Hot water tank | Shandong Yuesheng | – | 2020 | 20 hL capacity - Heat exchanger | Shandong Yuesheng | – | 2020 | 10 m² surface - Pumps | Shandong Yuesheng | – | 2020 | 1 hot water pump, 1 wort pump - Platform with access | Shandong Yuesheng | – | 2020 | Stainless steel construction - Steam generator | Shandong Yuesheng | – | 2020 | 150 kg/h

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Dedpfx Adjl Hxmdohoku

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Dkedpeukafxefx Adhsu

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Dkedpfx Ajmrrwfodhju Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h Dkodpfxov Da Dlo Adhou - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: EF1UE15115012228, This is an UltraVent hood from the premium manufacturer Rational, type UV 201/E, suitable for the combination steam ovens SCC, CMP 201 from 10.2011 to the current model series (index H and I), including the connection kit. The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Service: We can gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a comprehensive range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: * 6 months warranty on all electrical parts * High-quality brand-name equipment at fair prices * Professional overhaul/inspection & expert cleaning, tested & fully functional - or your money back * Flexible shipping or self-pickup options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts, inspection according to DGUV V3 This UltraVent hood features patented condensation technology, which captures and removes vapors and fumes. Complex measures for exhaust air installations are a thing of the past. An external connection is no longer required. Installation is simple and can be done at any time, even retroactively. Ideal for use in small kitchens, in sales areas of butchers, bakeries, snack bars and catering services. Technical data: * W x D x H: approx. 886 x 1226 x 450 mm * Power connection: V: 230 * Serial number: EF1UE15115012228 * Year of manufacture: 2015 Further information: * Integrated lighting * Exhaust air capacity: approx. 1000 m3/h Condition: used, fully functional Dodpfezu Sbtox Adheku Shipping: * Delivery or self-pickup by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: used, Consisting of : “GEA-CFS” former Type VM 600 HSE all stainless steel speed up to ± 50 strokes / min. (Depending on the product, shape, temperature and machine settings) mobile with outfeed conveyor belt width 600 mm surface of the dies 570 x 130 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 1.750 kg dimensions (l x w x h) : ± 2.500 x1.300 x 2.200 mm 3x400v 50 Hz mobile new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes) + “Berief” contact cooker Type Dubra DB 8/600 continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg + “Kersting” After Heating Tunnel net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm Dksdpfxozzcqfs Adheu outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, Conical bottom Diameter: 1.500 x 1.500 = capacity 3.000 L total height: 2.800 mm Manhole diameter: 500 mm Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Suitable for direct steam injection Djdpfx Adozzazhehsku Suitable for vacuum With agitator Switch cabinet not included Installation frame not included

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) Djdpozk U E Tofx Adhjku - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2017, Overview Dkedpfezxnu Djx Adhju Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt Dodpfxeyx I Awe Adhjku - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. Dksdowzypnjpfx Adhou The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm