Used Stage Rake for sale (3,792)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) Lhodpfxeyug R Ro Al Ish • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Lsdpfx Aloyug Hxo Ishh The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2013, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, German semi-trailer, lift axle, Mercedes axles, 1st axle liftable, further information by phone: Christian Bredemeier Lhedpoyq U A Tefx Al Ijh

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 04/2027, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Kraker CF-Z sliding floor semi-trailer * Approx. 90 m³ volume * 3 x SAF axles * WABCO EBS / ABS Lhodpezb Si Eofx Al Ijh * Lift axle * Aluminum body * Cargo Floor system * Sliding floor * Rear doors * Galvanized chassis * Tool box * Tires 385/65 R22.5 * GVWR 42,000 kg * Fifth wheel load 15,000 kg * Axle load 3 x 9,000 kg * German vehicle * Well-maintained condition * Immediately ready for use * Inspection possible by appointment * Financing and delivery available upon request * Further information available upon request

Condition: used, maximum load weight: 28,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, Equipment: ABS, * Kraker 3-axle moving floor trailer CF-200 * approx. 92 m³ * 10 mm floor * Air suspension * Disc brakes * Wabco Smart Board * SAF axles * Alloy wheels * Platform * Rolling tarp * Lift axle * Remote control Lhsdpfx Asyyt Hdel Ioh * EBS * ABS

Condition: used, maximum load weight: 30,850 kg, overall weight: 36 kg, axle configuration: 3 axles, first registration: 09/2019, Year of construction: 2019, Equipment: ABS, Kraker CF-200 moving floor trailer, approx. 92 m³, SAF axles, lift axle, air suspension, disc brakes, platform, roll-up tarp, remote control, EBS, ABS Lhsdpfeyyt Emsx Al Ioh

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,380 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2017, Tyre size: 385/65R22,5 Suspension: air suspension Lhedpfx Asucy Agsl Ieh Drive: Wheel Empty weight: 7.200 kg Carrying capacity: 34.800 kg GVW: 42.000 kg

Condition: used, empty load weight: 7,600 kg, maximum load weight: 28,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2007, loading space length: 13,600 mm, loading space width: 2,420 mm, loading space height: 2,800 mm, suspension: air, tire size: 385/65R22.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, MB axles, disc brakes, air suspension, lifting + lowering, ABS (anti-lock braking system), roll-up tarpaulin, portal doors, U-protection, side aluminum driving protection, supports, special floor for self-unloading Lhjdpfxsummufo Al Ieh Construction: 3-axle sliding floor trailer with roll-up tarpaulin, approx. 92m³, sliding floor is approx. 34mm thick, sliding section 6-12mm ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, axle configuration: 3 axles, first registration: 07/2009, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, total length: 14,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,450 mm, color: other, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Payload: 33,400 kg, Unladen weight: 8,600 kg, Gross weight: 42,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2009, Body material: Aluminium, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: ON-34-DJ Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tread depth left: 11 mm; Tread depth right: 5 mm Axle 2: Tread depth left: 8 mm; Tread depth right: 4 mm Axle 3: Tread depth left: 2 mm; Tread depth right: 3 mm Lhodjy Irn Aepfx Al Ish Weights Unladen weight: 8,600 kg Payload: 33,400 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): valid until 12.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) licence plates quickly arranged • Expert technical services • The security of “recognisable quality” • And much more.... Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly for our European warranty package.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 04/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2010, Equipment: ABS, In accordance with our General Terms and Conditions, and without any warranty or guarantee, we are pleased to offer you the following vehicle without obligation and subject to prior sale, errors, or typographical mistakes: Lhjdpoyv Tknjfx Al Ish Kraker 92 cbm Moving Floor Trailer (Vehicle No. 109) First registration: 12.03.2010 Type: CF 200 Perm. total weight: 35,000 kg Dimensions: Length 14,010 mm x Width 2,550 mm x Height 3,800 mm Loading volume: 92 cbm TÜV valid until 04/2026 Sliding tarpaulin, platform Portal doors split 1/2 + 1/2 at the rear Clean floor and end sections Remote control for moving floor Cargo Floor system 2 x LED work lights above drop supports Drop supports BPW axles 1st axle lift Tyres: 385/65R22.5 (1st approx. 40/50%, 2nd approx. 60/40%, 3rd approx. 30/70%) Wheel chock 1 pair of LED work lights behind the 3rd axle WABCO ABS Air suspension Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our General Terms and Conditions apply. The place of jurisdiction for both parties up to a disputed amount of €100,000 is the local court of Ludwigslust; for higher disputed amounts, the regional court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: new, maximum load weight: 31,098 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock no.: 5743 IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Approx. 92 m³ Kraker sliding floor semi-trailer with 10 mm ribbed floor / remote control / pneumatic underrun protection / side protection tarpaulin / Lhsdpfxoy T Dk Ts Al Ijh Chassis galvanized ---- * Manufacturer: Kraker * Type: K-Force * Year of manufacture: 2026 * Total weight: 39,000 kg * Unladen weight according to manufacturer: 7,902 kg * Payload: 31,098 kg * Axles: 3x SAF with 1st axle as a lift axle and starting aid / disc brakes * Suspension: Air suspension with lifting and lowering * Tires: 385/65R 22.5 on steel rims * Color: Body RAL 7005 / Chassis MicroZinq / Tarpaulin SIO 7500 Black * Volume: 92 m³ (13.53 m long x 2.48 m wide x 2.69 m / 2.782 m high) * EBS Wabco * Chassis Microzinc * Wear plates at the rear 1,250 x 2,500 x 3 mm * Two-wing rear doors with pneumatic locking * Operating platform at the front with access ladder on the left * Saddle height: 1150 mm * Cargo Floor CF 500 Compact with 21 floor planks * Floor 10 mm thick, ribbed with aluminum end caps * Operation: Remote control and in the control panel * at the rear left * Roll tarpaulin with central locking * Roll-fix dirt tarpaulin for the side wall with crank * Sliding side wall made of aluminum with a trailing tarpaulin * 2 plastic rail cleaners on the carriage * Extendable access ladder at the rear right * 4 x Swiveling steel struts 50mm round * LED rear lights 2 x round on each side * 2x LED work lights at the height of the support winches * 2x LED reversing lights located behind the axles * Tool box made of plastic at the rear left * Holder for broom and shovel * Ladder with 10 steps * Hydraulic hoses at the front approx. 3.5 m long * Individual fenders * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard * Pneumatically folding underrun protection * Full load supports (crank supports) AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Note on possible errors in the advertisement: IMMEDIATELY AVAILABLE! AVAILABLE FOR RENT, PURCHASE, OR LEASE WITH OPTION TO BUY, BY APPOINTMENT! Despite careful preparation of the advertisement, individual errors may have crept into the text or data. We assume no liability for errors, changes or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 31,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 89 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, 3-Axle Kraker CF-Z Cargo Floor Walking Floor Trailer 89 m³ VIN: 16069337 Chassis / Attachments: * Air suspension / Raise & Lower * Lift axle: 1st axle * BPW landing legs * WABCO Smart Board * Tires: 385/65 R22.5 * Remaining tire tread: Front approx. 10/50%, Middle approx. 20/80%, Rear approx. 70% * 3 x BPW axles with disc brakes * PVC storage box Body: * Walking Floor system by Cargo Floor * Volume: approx. 89 m³ * Sliding roof tarp * Standing platform with walkways on left and right Weights: * Gross weight: 39,000 kg * Payload: 31,400 kg * Unladen weight: 7,600 kg Other: * German registration Lhjdpfx Aeylrp Tel Ieh New main inspections / safety checks or modifications to gross weight (downrating/uprating) available upon request. We are happy to assist with obtaining export/transfer license plates, as well as arranging the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Commercial Vehicles is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible's particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, you'll find a wide range of vehicles. Our company philosophy is defined by fairness and integrity. Because customer satisfaction is very important to us, we offer our clients an outstanding all-inclusive service package and provide a competent contact person to support you through the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to assist you with obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending! Lhsdpsv Hchlefx Al Ish

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2019, total length: 14,020 mm, total width: 2,550 mm, suspension: other, tire size: 385/65R22.5, wheelbase: 9,100 mm, color: grey, Year of construction: 2019, Axle Configuration Tyre Size: 385/65R22.5 Axle Brand: SAF CD Brakes: Disc brakes Rear Axle 1: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: Air suspension Rear Axle 2: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: Hydraulic suspension Rear Axle 3: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60%; Suspension: Air suspension Lhsdeygw Tgjpfx Al Ish Weights Unladen weight: 7,300 kg Payload: 34,700 kg Gross vehicle weight (GVW): 42,000 kg Maintenance, History, and Condition APK (MOT): valid until 02/2027 Damage: none Identification Registration number: OX-46-BJ Additional Information Please contact Mark van der Steen or Bob Beukers for further information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2019, total length: 14,040 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,100 mm, color: grey, Year of construction: 2019, = Additional options and equipment = - Air suspension = Additional information = Axle configuration Axle brand: SAF CD Brakes: Disc brakes Lhodpfx Aoylm I Dol Ish Suspension: Air suspension Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle 3: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Weights Unladen weight: 7,300 kg Payload: 34,700 kg Gross vehicle weight: 42,000 kg Maintenance APK (General Inspection): valid until 12/2026 Identification Registration number: OV-51-ZK Further information Please contact Mark van der Steen for more information.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2016, loading space volume: 90 m³, suspension: air, color: red, Year of construction: 2016, Make axles: SAF Empty weight: 7.300 kg Carrying capacity: 31.700 kg GVW: 39.000 kg Lsdox Eb Ukjpfx Al Iehh APK (MOT): tested until 09/2026 Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS

Condition: used, empty load weight: 8,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, loading space length: 13,530 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, loading space volume: 94 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Disc brake Lhedpfxswv Uixj Al Ijh EBS Payload 28,000 kg Air lift suspension Sliding tarp Platform SAF axles Alcoa aluminum rims Lashing rings Subject to errors and omissions

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Lhedpfx Alsut S E Ne Ioh Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm Ledpozdgnbofx Al Ijhh

Condition: used, Rico Syncro PRCN 30-135M CNC Pressbrake Cyblec DNC 60 Control Lhodpfxozdghne Al Ish Year 2006 Foot Pedal Laser Guards Top & Bottom Tooling 130ton Capacity x 3100mm 9200kg Footprint 3900mm x 2000mm x 2600mm

Condition: excellent (used), Year of construction: 2017, Very well-maintained E Brake from SafanDarley. Lhsdpfxezfphls Al Ioh Type: E Brake B 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, X1, R, Z1, and Z2 CNC Hydraulic Wila NS top clamp Includes a set of tools.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2000, total width: 2,550 mm, suspension: other, tire size: 385/65 R22,5, wheelbase: 8,850 mm, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension - Drum brakes - Central lubrication system = Notes = Contar 40FT HC interchangeable chassis, year of manufacture 2000, rear extendable to 45 feet (not functional), SAF axles with drum brakes, front: 1x 40 (45) FT HC / 2x 20 feet, first axle is a lift axle, central lubrication system, unladen weight: 5,280 kg, permissible total weight: 39,000 kg, ABS/EBS, tires 385/65-R22.5 (L: 8/7/7 mm; R: 7/9/9 mm), Dutch registration = Further Information = Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Drum brakes Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 55%; Suspension: Air suspension Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 25%; Tire tread depth right: 20%; Suspension: Hydraulic suspension Ljdpsx R Szbsfx Al Ishh Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 5%; Tire tread depth right: 5%; Suspension: Air suspension Weights Unladen weight: 5,280 kg Payload: 33,720 kg GVWR: 39,000 kg Functional Body brand: Contar B 1227 LC 4422G Extendable body: Yes Condition Technical condition: good Optical condition: good Identification License plate: OG-17-HZ Further information Please contact Arne Honingh for further information.

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine Lodpfx Ajzdpc Tjl Ijhh

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2026, Technical Information Lhsdpfezggkajx Al Ioh Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Gearbox: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Tyre tread left: 100%; Tyre tread right: 100%; Suspension: Parabolic suspension Rear axle: Tyre size: 315/70R22.5; Max. axle load: 13,000 kg; Tyre tread left: 100%; Tyre tread right: 100%; Suspension: Air suspension Condition Overall condition: very good Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: Geen

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2004, total length: 13,890 mm, total width: 2,550 mm, suspension: air, tire size: 445/45 R19.5, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Axle configuration Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre size: 445/45 R19.5; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Tyre size: 435/50 R22.5; Max. axle load: 9000 kg Rear axle 3: Tyre size: 435/50 R22.5; Max. axle load: 9000 kg Weights Empty weight: 7.500 kg Carrying capacity: 31.500 kg GVW: 39.000 kg Identification Registration number: OH-18-LG Lhodpfx Alezguavo Ioh