Used Stacking Line Paleternoster for sale (11,531)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Gbodpou Tg I Dofx Afnsh Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, mileage: 609,116 km, power: 265 kW (360.30 HP), first registration: 05/2016, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,450 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional options and equipment = - DVD - Front refrigerator - Retarder - Wheelchair lift - USB connections - USB connections - Webasto = Further information = Gjdeyhc Edopfx Afnsbh Damage: none = Company information = We are an international company based in Belgium, located near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and boasts a large parking area that serves as a display site. We always have a wide selection of buses in stock – all makes, capacities, models, and at every price level. We can find the right coach, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus viewing hours: Mon-Fri: 8:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Gbodpfjpg Er Nex Afnjh

Condition: used, mileage: 516,361 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD player - Front refrigerator - Retarder - Wheelchair lift - Webasto heater = Further Information = Damages: none = Company Information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for purchasing and selling used buses, offering a large parking area that serves as our exhibition space. We always have a wide selection of buses of all brands, capacities, models, and price ranges in stock. We can help you find the right coach, school, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typing mistakes. Viewing hours for used buses: Mon–Fri: 08:30–12:00, 12:30–17:00. Gbodpoyhbmmsfx Afnoh We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more. (Mówimy po polsku, Agata)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Gsdsyhcabepfx Afnebh Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Used (only test-run) vibratory finishing machine from PERS (image similar) Gentle deburring of small parts, laser-cut and stamped parts, formed, turned, and milled components. Suitable for all materials! Fully manually operated stand-alone unit. Low investment required! Technical Data: Year of manufacture: 12/2020 The machine is powered and can be inspected by appointment! Gbedpfx Afjhr Rkionjh Capacity: 120 l Bowl diameter: 640 mm Dimensions (LxWxH): 1,740 x 900 x 1,470 mm Power: 4 kW Voltage: 400 V AC / 3 phase Frequency: 50 Hz Weight: approx. 500 kg Speed: 50–160 RPM PU coating: 26 mm

Condition: good (used), WEBER tube extrusion line including: Gedpjvryhysfx Afnobh WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: used, functionality: fully functional, Scheer DB 22 double-sided line boring machine, 2 drilling motors of 1.8 kW each, 32 mm pitch, 21 spindles per beam, good condition, dimensions 3100 x 1100 x 1800 mm, portal passage 850 mm, weight 345 kg Godsw Adrcspfx Afnobh

Condition: used, Year of construction: 1985, Scheer DB5 row drilling machine Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm spacing Gjdpewv Uy Dofx Afnebh - stop ruler - various dowel drills - portal opening 1056 mm - 2.2 kW

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Complete AOI Production Line GÖPEL Vario Line 3D X100 incl. Handling – Used System For sale is a complete, integrated AOI production line consisting of a GÖPEL Vario Line 3D X100 inline AOI system including full PCB handling (loading and unloading, buffer and verification stations). Line configuration (excerpt): - GÖPEL Vario Line 3D X100 Inline AOI - 3D measurement module (ViewZ) - Orthogonal and angled view inspection - PILOT AOI software incl. CAD import, OCR/OCV, statistics - Inspection area: 510 x 470mm PCB Handling (RG Modules): - LPE-1M Loader (magazine loader) - PB 500/1 buffer conveyor - PB 500/3-AP buffer conveyor with integrated inspection/verification station - LPA-2M/QV unloader with pass/fail sorting (2 magazines) - Electric width adjustment (bus connection) - Inline interfaces (SMEMA) Godpfeyhzunex Afnobh - Verification and analysis workstations Condition: - Used equipment from ongoing production - Well maintained and fully functional - Sale as a complete line, not individual components Viewing & Service: - Sale on behalf of a customer - On-site inspection possible - Training and commissioning can be offered on request - Support with disassembly, transport, and recommissioning available by arrangement - Ideal for EMS providers and electronics manufacturers Location: Germany Scope of delivery: as inspected

Condition: good (used), Slitting line by manufacturer Schmitz. Maximum strip width up to 800 mm. Equipped with a trimming shear. A large number of tools are included. The line has already been dismantled and packed for transport. Technical documentation, electrical diagrams, etc. are available. Gsdpfx Afeyiuutjnsbh

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder Gbjdpfju Rda Ijx Afnsh - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 2021, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, CODI DPL - 250 DEPALLETISER Gbedpfx Afsxtavvjnsh LOWERATOR 6 HEAD COUNTER PRESSURE FILLER AND SEAMER NITRO DOSER SET FOR 250 ML CANS, CHANGE PARTS now decommisioned, ready for shipping

Condition: used, Year of construction: 2020, Working width from to 50 x 150 mm Gbjdpfxjyhq Umj Afneh Working height from to . mm

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW Godewdgiyjpfx Afnjbh

Condition: refurbished (used), Year of construction: 2006, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) between 2 and 6 production rows digital control puncher press rolls Gbedpew Hykiofx Afnoh year of build 2006 1 stamping knife is included, extra stamping knives are available for 2250 euro each

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-921-0027 Kallfass Super Wrap 650 De Luxe In-line, year 2012 format: 650 x 400 mm equipped: - transport speed 10 - 30 m/min. - tunnel clearance width, height 100 - 400 mm - film shortage control - temperature conrtol - foild thickness up to 120 ym - foil roll diameter max. 400 mm - foil width max. max. 650 mm Gbodeyingkspfx Afnoh - in line band length 600 mm - Conveyor belt delivery 600 mm - user guidance Touchpanel, Siemens - tunnel sealing height adjustable 100-400 mm - product length 120 mm max. - Film tear and separation control - compressed air connection 6 bar / 20L Takt - shrink wrapping machine --> available: 02/2026

Condition: used, functionality: unexamined, machine/vehicle number: Transport Tool Pump Stack, Year of construction: 2014, load capacity: 1,340 kg, Used heavy-duty custom installation built by Viro Engineering for Edwards. System is designed for lifting heavy vacuum pumps with a maximum lifting height of 50 cm (from ground level). Installation name: Transport Tool Pump Stack Includes: 4 x hydraulic lifting cylinders and 4 separate cylinders for raising the undercarriage (all 4 wheels can be hydraulically lifted for stability). Voltage: 220 volts Net weight: 970 kg Maximum weight capacity: 1,340 kg Manufactured: 2014 Gedpfx Afjw H Rahjnjbh System height at maximum lift: 250 cm Overall system height: 2005 cm

Condition: ready for operation (used), Year of construction: 2012, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. year of build 2012 length overall: 678 cm  conveyor belt width: 650 mm  independent dough calibrator V/4F volumetric dosing machine with 4 dosing nozzles cutting station Gbedpfxoyhdpko Afneh guillotine cutting knives, folding shoes etc. PLC control with touchscreen mobile execution on wheels pictures BEFORE cleaning

Condition: used, machine/vehicle number: 005989, Max length workable: 1500 mm Gedpfxowucl Ss Afnebh

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Gbedew N Nixopfx Afnsh Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,808 mm, total width: 4,850 mm, warranty duration: 12 months, total length: 14,875 mm, Artemis Upholstered Furniture Packaging Line Efficiency Meets Protection – The Modern Solution for the Furniture Industry Whether sofa, armchair, or entire living room sets: The "Artemis" sofa packaging line brings speed, precision, and security to your packaging processes. Say goodbye to time-consuming manual packaging and unnecessary material consumption – with Artemis, you secure your furniture swiftly, economically, and reliably for transport and storage. Technical Description The Artemis sofa packaging line has been specifically developed for the requirements of modern upholstered furniture manufacturers. It enables fast, material-saving, and secure packaging of sofas, armchairs, and other bulky furniture items. Automatic Packaging Process: Combination of stretch film and protective material application for optimal transport protection Flexible Application: Suitable for various sofa and armchair dimensions, rapid changeover without long downtimes Robust Construction: Industry-grade steel frame, durable drive technology, designed for multi-shift operation User-Friendly Control: Intuitive touch panel with recipe management, easy operation, and minimal training requirements Energy and Material Efficiency: Optimized film dispensing reduces consumption and lowers ongoing costs Safety Standards: CE-compliant, equipped with modern safety systems and emergency stop features Gedpfx Asw Rybujfnobh Key Advantages Cost Savings: Significantly lower material consumption compared to manual packaging Process Optimization: Automated processes reduce staffing requirements and throughput times High Product Quality: Consistent, tight, and secure packaging reliably protects furniture from dust, moisture, and transport damage Scalability: Designed for growing production volumes—from medium-sized to large-scale furniture manufacturers Sustainability: Resource-efficient packaging system with reduced film thickness and optional recyclable materials Typical Areas of Application Furniture manufacturers Logistics centers for upholstered furniture Packaging service providers for bulky goods Mattress manufacturers

Condition: excellent (used), Rondo starline is a high-performance bakery make-up line. Approx 13m long. The line consists of a calibrator. strip cutters. spray unit. Horizontal guillotine unit. Can be used for processing various dough types, including puff pastry, Danish pastry, yeast dough, shortcrust, and thin doughs for products like pizza or donuts Gbsdjx Squcepfx Afneh

Condition: good (used), Flott p40 with Dofra feed on x, y, z axes. Automatically controlled. Stroke x: 6500 mm Stroke y: 355 mm Stroke z: stroke of the drilling spindle on the drill machine, adjustable from 0 to 160 mm Morse taper MK4 Drilling up to 40 mm Tapping up to M30 Programmable via touchscreen Gedpfx Afjygrybonsbh The drilling process runs fully automatically after setup.

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Gsdpfx Asyb R Uasfnebh