Used Spring End Grinding Machine for sale (70,725)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed Nwsdexabkzspfx Ad Nsb - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized Nsdpfxexabtcj Ad Newb - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm Njdpfsxab N Djx Ad Nowb band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Nwodpfx Adjxaa Swo Njb Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table Nsdpfjxabp Dsx Ad Nowb - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm Nedpfxoxaapie Ad Njwb diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min Nodjxaaxqspfx Ad Nswb turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: like new (used), Machine come with lot of additional equipement. Nwsdpshvr Hbefx Ad Neb

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder Nedpevvl H Nefx Ad Newb - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Nodpjxy Nrgjfx Ad Nowb Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: new, Year of construction: 2026, High-quality construction Drive roller is crowned (this ensures the grinding belt is automatically centered on the roller) and fully vulcanized for maximum service life and optimal smoothness Tool-free, and thus fast and uncomplicated, belt change Continuously adjustable height for optimal setup of the belt grinder for the user Freely adjustable metal work stop for optimal and safe guidance of workpieces when using the large flat grinding area Nwsdpfx Aobb R N Isd Njb Belt speed is optimally engineered to minimize risk of workpiece burning during processing Models with extraction are equipped with robust and flexible extraction hoses Motor protection switch with CEE plug connection including phase inverter 5-year warranty on the motor 1-year warranty on the belt grinder Belt length: 2000 mm Belt width: 75 mm Flat grinding area: 600 mm Belt speed: 15/30 m/s Colour: RAL 9007 Three-phase motor 400 V: 3.0/3.75 kW Extraction capacity: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Machine dimensions (with extraction system) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg DELIVERY: FREE SHIPPING (within Germany) CAN’T FIND THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR A QUOTE!

Condition: new, Year of construction: 2026, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 15/30 m/s - colour: RAL 9007 - belt motor: 400 V 3,0/3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg Nedpfxep R N N Io Ad Nowb

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nsdpfxjvvkipe Ad Newb

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Nodpfx Aowhqpred Njwb

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Nwjdpfx Aewhqpljd Neb

Year of construction: 1974, condition: used, Grinding machine Nwodpfx Aeydc N Uod Nob

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250 Nwsdpeua Itujfx Ad Nob

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 360 mm gear width 210 mm max. module 7 Nodpfxsx E Dups Ad Newb min. module 0,5 Control Burri weight of the machine ca. 9,5 t Machine in top condition! (Original Reishauer RZ 362A) Extensive accessory package including BC2 loading/unloading unit and filtersystem. Direct drive in grinding and workpiece spindles, linear guides, ball screws and Heidenhain linear scales in all axes. Reports and inspection under power available upon request!

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Belt Grinder for Pipe and Profile Ends Demonstration machine, as new Nwsdpeydpkxefx Ad Nob Year of manufacture: 2008 Robust belt grinding machine for pipe and profile ends on a stable base frame with a large drive motor for professional metal processing. Description – ideally suited for finishing pipes and profiles – for diameters from 20 to 76 mm – grinding angles from 30° to 90° – high belt speed of 30 m/sec – powerful motors – vibration-free operation for optimal results Technical Data Motor power: 3 kW Grinding range: Ø 20–76 mm Belt dimensions: 100 x 2000 mm Guide piece adjustable from 30° to 90° Speed: 2905 rpm Belt speed: 30 m/sec Dimensions: 1300 x 640 x 440 mm Weight: 168 kg Accessories (optional) Roller set (radius rollers) for pipe and profile end grinder, ø 20 – 26 – 32 – 42 – 48 – 60 – 76 mm

Condition: like new (used), Year of construction: 2012, functionality: fully functional, HBM 75 x 2000 Belt Grinder Demonstration unit, as-new condition with minor signs of use Year of manufacture: 2012 Description: - Universally applicable for grinding edges, surfaces, and for cylindrical grinding - Graphite coating on the flat grinding area increases the gliding properties of the sanding belt - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly belt change, fast and straightforward - High grinding performance due to high belt speed - Quick adjustment for horizontal and angled position - Suitable for both workshop and industrial applications - Large flat grinding surface with protective cover - Includes fine adjustment for parallel belt tracking Nwsdpfx Asydn Tfed Nsb Scope of delivery: - K80 sanding belt - Sanding and support table - Rubberized contact wheel - Eye protection - Dust extraction nozzle - Graphite coating - Motor protection switch - Base frame

Condition: good (used), Magnetic plate, magnetic table, sine table, sine plate, relief grinding device, grinding machine accessories Njdpfxsb A Iqdo Ad Newb -Design: Cutting tool mold making for conically ground cutting plates or mold inserts -Angle head for surface grinding machine or measuring machine -Magnetic plate -Angle: adjustable -Wooden box -Total weight with box: 35 kg

Year of construction: 1996, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine Nwjdpfxsd Dzlio Ad Njb -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Condition: good (used), Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 Nwsdpfx Adodv T Tbe Njb -Angle table for chip breaker groove: 1 -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536 kg

Condition: good (used), Tool grinding machine, grinding machine, angle grinding machine, turning steel grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheels: Ø 170 mm, speed 3000 rpm -max. steel cross section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm Nodpfxefmm A Ee Ad Nswb -Weight: 500 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: VEB, Double grinding wheel type SE 2x315/1 -Grinding wheel: max. Ø 315 mm -Peripheral speed: 45 m/s -Motor power: 1.0 kW -Operating voltage: 380 volts Nodpfxjgqvlmj Ad Newb -Accessories: incl. grinding wheel dresser, see photos -Dimensions: 640/890/H1070 mm -Weight: 248 kg