Used Spray Device for sale (13,091)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, pressure (max.): 448 bar, WIWA Airless 28064 Dedpfx Acsyqx Utjxoki Delivery rate DH: 153 cm³ Transmission ratio: 64:1 Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Weight: 80 kg Serial no.: 209981-002-2018 Further information available on request.

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Dsdpfxeic Rnue Acxeki Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Further information available upon request. Dkedpfjwccnpjx Acxoi

Condition: good (used), Body lifting and alignment device Belt conveyor table with lifting and alignment device Fezer vacuum lifter Dksdpevdcmvsfx Acxsi Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. Dodpsyfz Ulofx Acxoki TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Repeatability: 0.01 mm MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min Dksdpjvf Riujfx Acxoi total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Dsdpevibc Hjfx Acxski Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91569581, Year of construction: 2013, load capacity: 1,000 kg, lifting height: 2,500 mm, construction height: 1,800 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,330 kg, Equipment: UVV, Jungheinrich ERC 210 Electric High-Lift Stacker with Rotator and Remote Control Year of manufacture: 2013 Battery capacity: 375 Ah at 24 Volts Load capacity: 1,000 kg Lift height: 2,500 mm with folded operator platform; approx. 1,050 mm with unfolded platform Overall height: 1,800 mm Fork length: 1,150 mm Weight: approx. 1,330 kg including battery The machine can also be operated with the operator platform folded and, via remote control, the hydraulics can be operated—lifting, lowering, and rotating. From the neutral position, the forks can be rotated 24 degrees in either direction. Operation is also possible without the remote control. The unit is in excellent working condition and immediately ready for use. Includes battery charger. Affordable delivery by specialized transport company available. Check out our other listings as well. Djdpfxjyi E U Rs Acxski We always have a wide selection of high-lift and low-lift trucks and forklifts in stock. Do you need spare parts for your forklift, high-lift truck, etc.? Just contact us.

Condition: good (used), functionality: fully functional, Manufacturer: Colortronic Type: CSE Dodpfx Aoyryl Necxski Power: 0.8 kW Equipment: Stainless steel lance with suction hose

Condition: good (used), functionality: fully functional, Manufacturer: SHINI Model: SAL-3U-CE Dkodpjyrylisfx Acxei Power: 1.15 kW Equipment: Stainless steel lance with suction hose Two units available Price: 350 EUR per unit

Condition: excellent (used), functionality: fully functional, power: 1.1 kW (1.50 HP), Motan material conveying unit, type MES 50, power 1.1 kW, fully functional. Dkedpfxoyryihj Acxji

Condition: excellent (used), functionality: fully functional, power: 0.8 kW (1.09 HP), Small Motan material conveying unit Power: 800 watts Dksdsyryh Dspfx Acxei Fully functional

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Dodsyqr Sxspfx Acxski

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Dksdexvivqopfx Acxji Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland

Condition: good (used), Year of construction: 1997, Residual oxygen measuring device for checking the gas volume in insulating glass. Dedpfx Aji Azc Ajcxjki Dimensions: Depth: 270 mm Width: 204 mm Height: 180 mm Weight: 5.7 kg

Condition: good (used), -Testing device for electrical equipment Dedpfx Acob A Ivzexski -each with isolation transformer -Number: 7 available -Price: per piece

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Dkedpfsx E Dbcex Acxji

Condition: used, d: 50 mm Overall length: 435 mm Available: 3 pcs Tool holder length: 340 mm Dksdpfslf I E Ajx Acxji

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Djdpfx Aceyay Rhsxski

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are: 01x slide-through protection, used Material color: hot-dip galvanized total length: approx. 2.700 mm U-profile: 50 x 50 mm Agraffe dim.: 335 x 50 mm (HxW) 04x hexagon head screw: M10 x 35 mm 04x Toothed nut: M10 08x washers: M10 Further information: System: SSI Schaefer for type designation: PR350/400 designed for double rack rows suitable f. clear width: approx. 2.700 mm General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Dsdpfx Acoh T Uwvjxoki Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used Material color: sendzimir galvanized total length: approx. 2.765 mm profile dimension: C: 60x40x8 mm including 2 agraffes Further information: Shelving system: SSI Schäfer suitable f. clear width: approx. 2.700 mm 06x hexagon bolt: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. Any additional transport or shipment of this Djdoh Ekdfopfx Acxski or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, working width: 1,000 mm, machine/vehicle number: XB005M A551335-01, Near-infrared device Tomra Polysort 1000 in very good condition, operated only with dry material. Includes acceleration belt and expansion hood with separation head. Djdpfxeymlqms Acxjki

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total height: 920 mm, load capacity: 250 kg, overall weight: 160 kg, total length: 1,150 mm, total width: 700 mm, TECHNICAL DETAILS Lifting capacity: 250 kg MACHINE DETAILS Dsdpfjyf At Njx Acxski Dimensions & Weight Dimensions (L x W x H): 1,150 x 700 x 920 mm Net weight: 160 kg Electrical connection: 400 V

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, total height: 1,200 mm, load capacity: 800 kg, overall weight: 317 kg, total length: 1,600 mm, total width: 900 mm, TECHNICAL DETAILS Dkodpfoyf Anmjx Acxji Lifting capacity: 800 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 900 x 1,200 mm Net weight: 317 kg Electrical connection: 400 V

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device Dedshyx Rkjpfx Acxoki -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg