Used Spindle Milling Machine for sale (84,363)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Ijdpfxjw Nklhe Ag Doa Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: Ijdpfx Agexz Dkgj Dja - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Year of construction: 1965 X (mm): 1000 Y (mm): 600 Iedpfx Ajq Ixz Reg Dja Mounting (iso/mk): 4 Power (kw): 2

Condition: new, Worktable ----- 1320 x 320 mm Iedpfxerzuctj Ag Dea Spindle intake vertical ----- ISO 40 Spindle take-up horizontal ----- ISO 40 Spindle speed vertical ----- 45 - 1660 rpm (11) Spindle speed horizontal ----- 40 - 1300 rpm (12) Displacement X ----- 1000 mm Displacement Y ----- 260 mm Traverse Z ----- 450 mm Distance vertical spindle - table ----- 220~670 mm Unloading ----- 200~760 mm Milling head rotatable ----- 360° Table feed X axis ----- 20~360 mm/min Table feed Y axis ----- 20~360 mm/min Iron feed Z axis ----- 400 mm/min T-slot ----- 14 mm Motor power ----- 3 KW / 400V Weight ----- 2100 KG INCLUDING * 3-axis digital readout SINO * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE hood * ISO40 collet holder including collets * Various tools

Condition: used, Used machine Year of manufacture: To be announced Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale at the front - 4 speeds with electronic speed display Isdpfx Agsxllw Ao Doa - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Dust extraction ports at top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction diameter: 150/120 mm - With 4-roller power feed unit Weight: 600 kg Availability: Short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Iodpfewwbkrjx Ag Dea Application Types Milling

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Ijdpfx Agetrhq Hj Dea - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: new, The Servomill® FPK 600 is a state-of-the-art Conventional Vertical Milling Machine designed for precision and versatility, making it an indispensable tool in mechanical manufacturing, particularly for tools and molds. This machine features a compact design that enhances flexibility and ease of operation, blending modern technology with traditional milling techniques. Equipped with advanced electronics, including electronic stops and handwheels, the Servomill® FPK 600 allows users to experience the benefits of CNC technology without the need for programming. This ensures not only high precision but also efficiency in production and education settings. With robust ball screws in all axes and powerful servomotors, the machine delivers smooth, precise movements and rapid traversing. Operators will appreciate features like the easily accessible control panel, automatic feed with programmable limit stops, and comprehensive standard equipment, including a coolant system, LED work light, and an extensive tool package. Trust in KNUTH's commitment to quality and reliability, and elevate your machining capabilities with the Servomill® FPK 600. Explore the advantages of this Conventional Vertical Milling Machine by requesting a quote today! Iodpfx Agsxb Dwgs Dsa

Condition: used, Year of construction: 1978, x-travel 820/850 mm y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Further techniscal detals please consider pictures Iedpfxexxb Htj Ag Dsa

Condition: used, Year of construction: 1995, functionality: fully functional, Spindle taper: ISO 30 RPM.: 50-3750 (stepless). Travel: X750 Y305 Z400 mm. Table size: 1065 x 230 mm. Automatic feed: X & Y Rapid speed: X & Y. Digital readout: RSF Z251 (X & Y), Year: 1995 Country of origin: Taiwan. Size (L x W x H): 1500 x 1500 x 2500 mm. Iedpfjx Ad Tkjx Ag Doa Weight: 985 kg. With motorized movement of head up/down, pneumatic tool clamping, drilling function in head with automatic feed and digital readout of depth, spindle brake, machine vice and misc. tools. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation Ijdpfxsw I U U Ds Ag Dsa - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 355 NC Main Drive Spindle speed range 10 to 1600 Iodoxzlu Hepfx Ag Doa Spindle bore 150 mm Number of axis 4 Movement X-Axis Movement 3000mm Y-Axis Movement 2000mm Y-Axis Rapid Traverse 7100 mm/min Z-Axis Movement 1600mm Z-Axis Rapid Traverse 7100 mm/min W-Axis Movement 700mm W-Axis Rapid Traverse 7100 mm/min Tools Type of tool holder SK50 Clamping Unit Clamping force 25 kN This 4-axis UNION BFK 150/2 Bed Type Milling Machine was manufactured in 1991. It features a Heidenhain control system and SK50 tool holder, with travel distances of X=3000mm, Y=2000mm, Z=1600mm, and W=700mm. If you are looking to get high quality milling capabilities consider the UNION BFK 150/2 machine we have for tact us for more information. Application Types Milling

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm Iodpfoxy Styjx Ag Doa T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: not inspected (used), MAHO Tool Milling Machine MH 500 W 1 With AKTIV Digital Display 132 Year of manufacture: approx. 1985-88 Travels: X/Y/Z: 500 x 350 x 375 mm Spindle speed: 63 - 4,000 rpm, stepless Spindle taper: ISO 40 Swivel table: 800 x 360 mm Feeds: 1 – 3,000 mm/min Rapid traverse: 5,000 mm/min Total power requirement: approx. 3 kW Weight: approx. 1,400 kg Dimensions (L x W x H): 1700 x 1300 x 1800 mm Technical details subject to confirmation! AKTIV Digital Display 132: - 3-axis position display, screen-based - Practical manual or conventional machine operation already permits some automation processes - 12" monochrome screen - Teach-in mode available - Tool radius correction - Absolute/incremental input - Setting of reference points - Metric/inch data entry The machine comes from a vocational training center and has been, in principle, well maintained. The control system boots up and the axes can be moved. Iodpexz Rcvsfx Ag Dea However, the machine is being sold as "defective" since no further functional testing can be performed by us.

Condition: good (used), – 2 pneumatic clamps Iedpfxoxndcps Ag Doa – 380V

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm Iedpfxjxwdvhj Ag Doa 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, Equipment: documentation/manual, Asquith Butler 3000 Bed Type Milling Machine, Siemens Sinumeric 840C CNC Control, Auto Indexing Head, (Live 5 Axis orthogonal head) ,3.1 x 1.2m Table, Travels x-3m,y-1000,z-1050. New 1995. Iedpfx Aow A Aiaog Dsa

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Iedpfx Aexzlu Tsg Dea Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Iodoxllxaopfx Ag Dsa Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Setup dimensions: 1200x80x1350 mm Fence jaws made of wood Including Holz Her 3-roller power feeder incl. stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12156, Brandnew lathe of the industrial brand Narvik CD330J-TRAINER (x750) Powersupply : 400V 2,2 / 1,1Kw Gears: 16T RPM: 53-2000 MK3 INCL. CE Additional details: Worklight LED 24Vac 9W Full-NORTON draadsnijkast Ronde klauwpl-kap met sw Beitelslede kap Achterscherm Koelinstallatie Uitneembare spanenbak Footbrake RVS asscherm + rolhoezen 3 Klauwplaat 160 BISON 3544 Veiligheidssleutel Iedpfjxxku Tox Ag Doa Total machine weight: 690 Kg

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 700 mm, feed length Y-axis: 490 mm, feed length Z-axis: 250 mm, Heidenhain Visue, 3 axes Iodpfx Agoxxmpmo Dea ISO 40 spindle Table 1100x305 mm Travels 700x490x250 mm 7.5 HP Weight 2100 kg

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) Iedpfx Aovuz Rujg Dea * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc.

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iodpfx Agsxylqro Dea Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Iodpfxexzk Iro Ag Doa Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm Iedpfx Aexc N Iysg Dja 20-position tool magazine SK 40 4th axis Lehmann