Used Spin Wheel Shot Blasting Machine for sale (108,546)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Bwodpfx Aowxrh Dodxow Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, dual-channel safety magnetic sensor integrated in safety control

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem Bwjdpsrhilxsfx Adxjw o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: good (used), Year of construction: 1970, Gildemeister 6 spindle automatic lathe AS 32-6 - Spindle stop device Bwjdpfxorrgr Ae Adxew - Pick-up device pneum. Accessories against surcharge - Cross hole drilling device - Thread cutting gear - Thread cutting device - optional milling device, cross-cutting device - Saving conveyor Machine was overhauled at the end of the 80s

Condition: excellent (used), Year of construction: 2020, operating hours: 25,500 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, For sale are two CNC production units with double spindle, pallet changer and automation by Chiron, type 370-17 DZ 12 W Technical data: Year of manufacture: 2020 X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool magazine: 2 x 24 positions Tool holder: HSK-A50 Control: SIEMENS 840D SL 4.8 Tool management: SIEMENS with Retooling Automation: Fanuc ROBOT M-10IA/12S Integrated workpiece changing device: IWW 0/180° Spindle speed: 24,000 rpm, max. 45Nm Chip conveyor with scraper belt Coolant system: KF 150 Weight: 9000kg (without automation cell) Machine hours machine 1 Operating hours: 25,133.6h Spindle 1 hours: 555h Spindle 2 hours: 2,975h Machine hours machine 2 Operating hours: 25,579.6h Spindle 1: 2,332h Bodpfx Adewrduisxsww Spindle 2: unused Transport and loading can be organized throughout Europe on request and for an additional charge. Prices plus VAT Inspection by appointment possible. Contact us, our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: RTN506 id no.650115, A package of different RTN wear parts. Control gage, impellors, blades, side plates etc - List can be provided if interest. Bsdpfeu Rr Erjx Adxeww

Condition: ready for operation (used), Year of construction: 2016, operating hours: 24,812 h, functionality: fully functional, machine/vehicle number: 16C0822, Machine fully functional. Videos and photos on request. Machine dismantled and stored in a warehouse (no possibility of starting cutting on site). Transport on the buyer's side. Bsdpfx Adsv Sqlioxsww

Condition: used, Year of construction: 2004, functionality: fully functional, air demand: 3,400 m³/h, DISA shot blast machine Model : SPH 2-5.5/12 Year : 2004 Max.loading limit of hook spindle : 300kg Height of hook spindle up to floor : 2018mm Max.⌀ of workpiece : 550mm Max. length of workpiece : 1200mm Bwodpfxjwpquqs Adxsw Number of blast chambers : 2 Air consumption of dust collector : 3400m³/h Blast wheel ⌀ : 342mm ( 13.5´´) Power : 2x7.5KW Installed power (without dust collector) : 25KW Control : SIEMENS Weight : 4600 kg

Condition: excellent (used), Year of construction: 1969, Max wheel Ø 300 mm Module + 5 Module - 0.5 Max. gear width 170 mm Max. spindle speed 1900 rpm Bwodpfx Aoxrvb Ejdxjw Max. workpiece weight 40 kg Engine Power 9 kW Weight 4600 kg

Year of construction: 1994, condition: used, Price: On request - Year: 1994 - Documentation available: Yes - Serial number: 40640000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bwodewnhl Rspfx Adxew Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Bwodpfxjxtaxwe Adxew Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material Bwjdsw Rrcwopfx Adxew - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Bwjdpjvv H T Refx Adxow Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: used, Motor 6 / 7.5 kW Location: Supplier Bwodpfxew Enw Io Adxow

Condition: good (used), functionality: fully functional, machine/vehicle number: C431-Q11, Balestrini double-headed tenoning machine model T0 Two work tables Round and longitudinal tenons Various height, width, length adjustments, etc. Fully refurbished tenoning machine, electrical cabinet, automation, and sensor. Can be seen in operation at our premises Bsdpfx Aew A Rp Ijdxeww Equipment price included Transport and installation available at extra cost.

Year of construction: 1991, operating hours: 19,888 h, condition: used, Price: On request - Year: 1991 - Documentation available: No - Serial number: 1844 - Operating hours: 19888 Financial information Bwodpfx Adewydviexjw VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 80-03/224-02, power: 4 kW (5.44 HP), pivoting range: 45 °, Tilting spindle moulder milling machine Bwjdpfx Ajxp Rmkodxow

Condition: good (used), Code: 0233 Bwjdpfx Adexrzggoxew Brand: REIMALL - ITALY Model: 105 Vertical multiple boring machine with adjustable spindles for panels, armchair elements, chairs, backrests, curved elements, and various Technical data: Table size mm 1000 x 500 Vertical table stroke mm 120 N° 2 motors Max opening between table and tools mm 350 N° 6 drilling units Compressed air 6 atm Overall dimensions mm 1500 x 1050 x 1600 h Weight kg 680

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Bwodoxrbihopfx Adxow Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Bwedpfexpkmqjx Adxew Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle Bwjdpfxjxg D Ays Adxsw - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Bsdpfx Adsv Ai N Ujxsww

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation Bodsxp Sfhspfx Adxeww - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Bsdpfx Adswhqprjxoww

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, overall weight: 500 kg, Manual spinning machine, Make: Pensel Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2300 rpm (stepless) Spindle mount: M 36 Bjdpfexp Sddox Adxeww Manual steel rest Tailstock stroke: 300 mm (smooth sliding quill) Machine weight approx.: 500 kg Machine description: - Powerful, lightweight spinning machine - Overhauled and ready for use - Main spindle with new bearings - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control system - Newly painted

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Bwjdpfx Adewhqpljxew