Used Slope Mower for sale (512)

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. Iiodpou Ruruefx Aatsf - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: new, empty load weight: 115 kg, maximum load weight: 635 kg, overall weight: 750 kg, loading space length: 2,006 mm, loading space width: 1,006 mm, loading space height: 1,100 mm, Year of construction: 2024, Low loader tipper trailer Garden Trailer 150 KIPP with high frame, high tarpaulin and support wheel Low loader Garden Trailer 150 KIPP with high frame and high tarpaulin - you can connect this model to any car with a class B driving license. The low loader has a tiltable drawbar, which makes it easier to load and unload your transported goods, especially bulk goods. The compact size of the loading area of 150x106 cm makes maneuvering with the low-loader attached to the hook child's play. Larger purchases, new furniture or household appliances or consumer electronics will not be a challenge for you if you have a low-loader. We offer delivery directly to the specified address to all German-speaking countries. We enclose all the documents required for registration with the low-loader. Low loader with high frame and high tarpaulin When you buy the Garden Trailer 150 KIPP low loader with high frame and high tarpaulin from UNITRAILER, you receive the following: Fully folding drawbar so that it can be placed on the rear dropside in a low garage or under the house. Vehicle with very comfortable loading and unloading of goods, which is possible by tilting the loading area. Documents: adapted to your vehicle. Simple and hassle-free registration procedure thanks to all the necessary documents - invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under this link. Iiedpsuk H Umjfx Aatjf Possible additional equipment - support wheel, additional drop sides, anti-theft device. Support from our experts, who will be happy to answer any questions you may have. Why should you choose the low loader with high frame and high tarpaulin? Ordinary low-loaders available in large supermarkets or even cheaper, old-fashioned professional low-loaders are usually not equipped with the tipping option. In this case, the drawbar is permanently attached to the low-loader. Every loading and unloading means that you have to lift the goods, which is often very difficult. The low-loader solves this problem because its loading surface tilts to make the entire operation easier. All you have to do is push the transported goods directly onto the ground. There is no need to lift or strain your hands or back. Low loader with removable rear dropside Low loader with removable rear drop side The low loader is particularly suitable for transporting lawn mowers or various types of trolleys. In this case, the sloping surface becomes an access ramp that is very easy to drive on with such equipment. You don't have to destroy and dirty your vehicle to transport this type of item. We don't leave an unpleasant smell in it that the rest of the travelers complain about. The low loader solves the problem of transporting dirty, sharp and odorous materials that hinder transportation by car.

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW Iijdpfx Aaozu Nxistef - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, Price upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for multiple container purchases. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible!* 1 unit available immediately at the warehouse, RAL 7043 4 units available shortly, other RAL colors on request Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN Technical description: •Internal dimensions: 6000 x 2300 x 750 mm •Usable volume: 10.4 cbm •Unladen weight: 1945 kg •Base: 5 mm S235 •Side walls: 3 mm S235 •End wall with angled upward slope •All sheets and profiles continuously welded •Double-wing door with safety lock •Standard ladder according to UVV, screwed on, galvanized Iiodezu Rkmspfx Aatof •Container tested and approved according to DGUV Rule 114-010 •Base-side wall connection 90° •Stringers made of U 90x55x4 mm •Stringer spacing 750 mm •Hook diameter 50 mm, S355 •Hook height 1570 mm •Top frame, round tube Ø 89 mm •Mesh hooks •All moving parts are greaseable •Steel guide rollers 159×6.3, length 300 mm •Warning markings according to DIN 67520 •Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) •Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,140 kg, empty load weight: 1,860 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price upon request. The price is valid ex warehouse, 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery is possible upon agreement. *Leasing/hire purchase possible.* 6 units in stock, RAL 7043 short-term availability, RAL 2011 Other designs and sizes are available from stock in Paderborn. You can view our stock on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 5500 x 2300 x 750 mm * Usable volume: 9.5 cbm * Tare weight: 1860 kg * Floor: 5 mm S235 * Side walls: 3 mm S235 * End wall with angled upward slope * All sheets and profiles are continuously welded * Combination flap (swing and folding wall, loadable up to 7 tons, spring-assisted) * Standard ladder according to UVV, screwed on, galvanized * 8 lashing eyes in the floor, loadable up to 2.5 tons * Container tested and approved according to DGUV rule 114-010 * Floor-side wall connection 90° * Stringers made of U 90x55x4 mm * Stringer spacing 750 mm * Hook diameter 50 mm, S355 * Hook height 1570 mm * Top frame, round tube Ø 89 mm * Net hooks * All moving parts are greasable * Steel guide rollers 159×6.3, length 300 mm * Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Iiedozu Rh Sopfx Aatjf Subject to errors and prior sale. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Iiodpfx Aaszu Rg Ustof Europe-wide delivery possible by arrangement. Leasing/hire purchase options available. 1 unit available for immediate delivery; other RAL colors available upon request. Other models and sizes available from stock in Paderborn. You can view our stock levels on our website. Technical description: • Internal dimensions: 5500 x 2300 x 750 mm (internal length) • Usable volume: 9.5 cbm • Unladen weight: 1820 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • End wall, sloped upwards • All sheets and profiles continuously welded • Double-leaf door with safety lock • Standard ladder according to UVV, screwed on, galvanized • Container tested and approved according to DGUV Rule 114-010 • Floor-side wall connection 90° • Hook diameter 50 mm, S355 • Hook height 1570 mm • Upper frame, round tube, Ø 89 mm • Net hooks • All moving parts greaseable • Steel drain rollers 159 x 6.3, length 300 mm • Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! If you have any questions, please send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: B11400955, Year of construction: 2019, operating hours: 14,500 h, load capacity: 45,000 kg, lifting height: 14,100 mm, fuel type: diesel, mast type: telescopic, construction height: 5,250 mm, power: 285 kW (387.49 HP), empty load weight: 108,500 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B11400955 Mast type: Telescopic Transmission: ZF 5WG 311 Technical condition: good Iiodpfx Aexlvtzoatsf Front tyres type: pneumatic Front tyres size: 21.00-35 Front tyres condition: 40 - 60% Rear tyres type: pneumatic Rear tyres size: 21.00-35 Rear tyres condition: 40 - 60% Description: Barge handling, good running and working condition. Sideshift, Heating, full cab, air conditioning, Barge handling, Solas scale, extra container frame, additional heating, 30° stop, pile slope, stabilizer, camera, central lubrication

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Iodpfx Aoxybdhsatsif Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2019, operating hours: 14,972 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 283 kW (384.77 HP), empty load weight: 83,700 kg, drive type: Diesel, Full container reach stacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE32 Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Ijdpfezighwex Aatsif Rear tire size: 18.00-33 Rear tire condition: 40 - 60% Description: Sold as is, ex works, to save on transport and handling costs. Twist locks and service parts are new. Side shifter, Full cab, air conditioning, joystick, Piggyback pile slope camera, central lubrication, movable cabin, SOLAS scale.

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Iiodjqv E S Rjpfx Aatjf Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: used, mileage: 55,600 km, power: 95 kW (129.16 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine type, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive conditions – also available for the Netherlands, Austria, and new business founders! Vehicle: Ford Transit * Manual transmission * Single rear tires * Low roof Technology & Comfort: * Air conditioning (R134a) * Digital radio DAB with USB * On-board computer * Cruise control * Leather steering wheel * Steering wheel with radio controls * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Heated driver's seat * Heated passenger seat * Driver's armrest * Passenger armrest * Driver's seat, 4-way adjustable * Passenger seat, 4-way adjustable * Manual lumbar support for driver * Manual lumbar support for passenger * Overhead console Ijdpozkc Ngjfx Aatoif * Glasses compartment * Tablet holder * USB port * Microphone * Lockable glove compartment * Tinted windows * Auto-dimming interior mirror * Pollen filter * Chrome front grille * Driver information display * Programmable interface module (PIM) Safety: ESP * Hill start assist (HLA) * Driver's airbag * Halogen headlights * Fog lights * Daytime running lights * Side marker lights * High-performance battery (AGM) * High-performance generator * Automatic door locking * Two-stage door locking system * Seatbelt pretensioner for driver * Seatbelts with automatic retractor * Mechanical parking brake Aerial work platform: France Elévateur TOPY 11 * Working height: 11.00 m * Platform height: 9.00 m * Maximum lateral reach without outriggers: 6.00 m * Load capacity: 120 kg / 1 person * Work platform 850 × 780 × 1,150 mm * Upper carriage rotation angle 400° * Steel boom with 1 telescopic element * Energy supply in the telescopic boom * Electro-hydraulic emergency control * Hand emergency pump * Return-to-transport-position indicator in the cab * Hour meter * Max. operating inclination: 5% * Max. operating slope: 15% Additional extras for the superstructure are available at an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Customized superstructure possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are subject to change. Sincerely, Pimenta Automobile

Condition: used, Year of construction: 2012, lifting height: 12,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm Dimensions of cargo space: 230 x 80 x 171 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2012 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Max. climbing capacity: 25% Max. permissible longitudinal tilt angle: 3° Iiodpfx Asv Tibrsatjf Max. permissible cross slope angle: 1,5° Own weight: 1.810 kg Special features: white tires, attachment points for restraint systems (PSA) available, only for indoor use Information: Suitable transport trailer upon request for an additional charge of €2,999 Location: 41468 Neuss immediately available

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Iedpfx Aaszu Ebtjtoif Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "AGRAR-LINER" First registration: 16.01.2024 Mileage: 243,148 km Dimensions (L x W x H): 10,142 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 End wall and side walls made of 3 mm HardoX steel HB450 Iijdpfx Aaozu Edbetsf Sloping end wall, interior with access ladder 2-leaf combination doors with pivoting function, pneumatic secondary release 2 grain slides with 1 dust cover Reinforced tarpaulin roof HYVA tilting cylinder, Alpha type, suitable for high and low pressure Aluminum landing legs, full load capacity 2 air vibrators mounted below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Lifting and lowering device Tires: 385/65 R 22.5 Aluminum ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it’s also available immediately in the FULL-SERVICE rental program.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2017, loading space length: 18,500 mm, loading space width: 2,530 mm, loading space height: 2,480 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Spare wheel - Drum brakes - Central lubrication system Iedpfszcapcjx Aatoif = Notes = Beautiful BROSHUIS 3ABSD-48/1 3-axle low-bed trailer from 2017 with ABS/EBS, permissible total weight: 59,000 kg, drawbar load with coupling: 23,000 kg, hydraulic steering on the 2nd and 3rd axles, lift axle on the 1st axle, hydraulic ramps (2-part, length: 310 + 190 cm, width: 91 cm, slope angle 8°, width adjustment), hydraulic loading platform, hydraulic support legs at the rear, electric winch (8,165 kg with 27.4 m steel cable and hook), loading platform height: 92.5 cm, 2 pairs of girder pockets, widening supports, various lashing points and girder pockets, BPW Eco Plus axles with drum brakes and twin tires at the rear with 245/70-R17.5 tires (tread depth left: 3/6, 8/10, 6/7 mm; tread depth right: 6/7 mm, 10/11, 7/8 mm), 1x spare wheel, unladen weight: 16,049 kg, permissible total weight: 59,000 kg, Dutch registration with a valid technical inspection (APK) until 04.12.2027. = Further Information = Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 16,049 kg Payload: 42,951 kg GVW: 59,000 kg Functional Body brand: Brosuis 3ABSD-48/1 Loading platform height: 91 cm Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 04.2027 Technical condition: very good Optical condition: very good Identification Registration number: OX-76-HF Further information Please contact Arne Honingh for further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2019, loading space length: 18,320 mm, loading space width: 2,530 mm, loading space height: 2,480 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Spare wheel - Drum brakes - Central lubrication system = Notes = 09/2019 BROSHUIS 3ABSD 3-axle low-loader with ABS/EBS, permissible total weight: 59,000 kg, gooseneck with a drawbar load of 23,000 kg, hydraulic steering on the 2nd and 3rd axles, lift axle on the 1st axle, hydraulic ramps (2-part, length: 310 + 190 cm, width: 91 cm, slope angle 8°, width adjustment), hydraulic loading platform, hydraulic rear supports, electric winch (8,165 kg with 27.4 m steel cable and hook), loading platform height: 92.5 cm, 2 pairs of pocket rows, widening supports, various lashing points and pocket rows, BPW Eco Plus axles with drum brakes and twin tires with 245/70-R17.5 tires (tread depth left: 7/8, 10/7, 6/8 mm; tread depth right: 7/10, 10/11, 9/9 mm), unladen weight: 15,860 kg, permissible total weight: 59,000 kg, Dutch registration with a valid technical inspection (APK) until 08.10.2026 = Further Information = Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 15,860 kg Payload: 43,140 kg GVW: 59,000 kg Functional Body brand: Brosuis 3ABSD Loading platform height: 91 cm Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 10.2026 Iiedpfezcy R Hex Aatsf Technical condition: very good Optical condition: very good Identification License plate: OX-77-HF Further information Please contact Arne Honingh for further information.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Transmission: Clark 4-speed automatic Iiodpjzr Sp Ejfx Aatsf Condition: Ready for operation and fully functional Technical condition: Good Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 230 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated telescopic boom lift Iisdpfxozr Shuj Aatef Transmission: Hydrostatic Technical condition: New Front tire type: Solid rubber Front tire size: 18 Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 18 Rear tire condition: 80 - 100% Description: The 180 ATJ articulated boom lift has a lifting capacity of 230 kg and a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloping, and congested surfaces. Thanks to its off-road capabilities, it is the ideal work partner on construction sites with uneven ground. The new, stepless hydraulic speed control reduces noise levels and fuel consumption. As with the other combustion engine-powered boom lifts, the 4 drive wheels and 3 steering modes facilitate movement and positioning of the machine on congested or narrow construction sites. The design of the control panel ensures a clear working environment for quick operation and immediate productivity.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 135 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Technical condition: Very good Front tyres type: Solid rubber Iiedpsupauqsfx Aatsf Front tyres size: 18 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

Condition: new, power: 294 kW (399.73 HP), first registration: 02/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 2,980 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, total length: 9,250 mm, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Power take-off (PTO) - Spare wheel - Sun visor = Notes = Fuel tank: 300 liters Air conditioning Reinforced clutch 9.2-ton front axles 9.5-ton suspension 13-ton rear axles 16-ton suspension Equipped with a 22 cbm Meiller rear tipper: Type: H436 Classic Sloping front wall and tailgate Chain-operated tailgate S14 Front wall 6 mm, HBW400 Side walls 8 mm, HBW450 Floor 10 mm, HBW450 Tailgate 6 mm, HBW400 Cab protection covering 1/3 of the cab roof = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Transmission Gearbox: TipMatic 12.28 OD, automatic Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65R22.5; Steerable Front axle 2: Tire size: 385/65R22.5; Steerable Rear axle 1: Tire size: 315/80R22.5 Rear axle 2: Tire size: 315/80R22.5 Weights Unladen weight: 16,000 kg Payload: 28,000 kg GVWR: 44,000 kg Functional Iodpfx Aajzrga Seteif Body manufacturer: Meiller H436 Pump: Yes Tipper: Rear = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after-sales services, such as supplying parts and providing (local) training.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 4,200 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details. Iedpjzrnvujfx Aateif - Table Height from Floor: 850 mm- T-Slots (Number / Width / Distance): 3 / 18 mm / 100 mm- Spindle Speed: 60 - 8000 rpm- Distance Spindle to Vertical Guide Way: 430 mm- Main Motor Power: 7.5 / 11 kW- Total Power: 10.00 kW- Feed Rate: 5 - 5000 mm/min- Rapid Feed Rate: 15000 mm/min- Positioning Accuracy: 0.01 mm- Repeatability: 0.005 mm- Machine Weight: 2500 kg (Manual lifting specification) / 4200 kg- Operating Voltage: 400 V / 440 V, 3-Phase, 50/60 Hz- Operating Temperature: 0°C ~ 45°C- Pneumatic Operating Pressure: >= 0.6 MPa (6 kg/cm²)- Operating Setup Time: 186,488- Tool Changer: 16-fold double-arm tool changer- Standard & Included Accessories: Siemens 828D control, electronic handwheel, spiral chip conveyor, servo drives for all 3 axes, 16-position tool changer, pneumatic tool clamping, air conditioning, fully enclosed work area, work light, Ethernet, USB interface, sloping chip tray, automatic central lubrication, spindle oil cooling, operating tools, operating instructions, X.div CNC rotary table 170 mm with manual tailstock for Siemens control, 6" manual chuck for X.div, BT40/B16 and BT40/B18 drill chuck mounts, MAS BT40-ER40-80 collet chuck, 15-piece ER40 collet set (3-26 mm), BT40 combination mandrels (Ø22, Ø27, Ø32 mm), WELDON BT40 milling chucks (Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 mm) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Iiedpfxoy T Hbze Aatof Technical Specification Through-spindle Coolant Yes

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load manometer for axle load, length of the upper bed approx. 4,400 mm including slope, length of the lower bed approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, front wall approx. 800 mm high, 16 x rafter pockets in the outer frame, 32 x lashing eyes, ramp approx. 3,100 mm long, ramps for driving over on the gooseneck, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Iodpfjztqvtsx Aatjif

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 tie-down points, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, side-adjustable ramps, ramps with spring lifting mechanism, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators. Surcharge for: steel front wall - galvanized: €500. -- Subject to misprints, errors and modifications. Sample images. More data at: !, More details: ! Iisdpfx Ajztnvdeatef

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 lashing eyes each 10 t, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Iedpfx Asztnwboatjif