Used Sliding Bed Lathe for sale (15,033)

Condition: good (used), Used 2-meter lathe from Colchester Type: Mastiff 1400 Turning length: 2000 mm Turning diameter over bed: 540 mm Dsdpfxszi Salj Adgowb Spindle bore: 89 mm Includes 3-jaw and 4-jaw chuck Includes steady rest 2-axis digital readout

Condition: used, Poreba TCE-200 Roll Lathe 80 ton capacity 2000mm Swing 8000mm Between Centres Single saddle 4-jaw chuck Tailstock Swarf conveyor Date of manufacture: 1973 Dsdpfxszwmnys Adgjwb Serial No. 1164-003

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. Dsdpjzfwm Njfx Adgowb The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: good (used), *SAG 210 Specifications:* - Center height: 210 mm - Maximum diameter above the bed: 420 mm - Distance between centers: 1000 mm - Spindle: Camlock D1-6, 52mm bore - 12 speeds, 30 to 2000 rpm - Threading: Metric, Whitworth, Module, DP - all without changing the gear train - 5.5 kW / 400V motor - Weight: ~ 1,650 kg > *GRAZIANO SAG 210 LATHE - Refurbished by CMV Villampuy 1996* > Italian Graziano Tortona SAG 210 parallel lathe, 1000mm distance between centers, 210mm center height. > Refurbished by CMV Villampuy (plate dated 1996), bed ground, complete Norton gearbox. > 400V motor, 52mm bore, metric / Whitworth / module / diametral pitch threading. Dwsdpfszxiv Asx Adgsb

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Djdpfx Adoxab Tpsgjwb Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: used, Safop Leonard-90TT/CNC horizontal axis turning lathe Model Leonard-90TT/CNC 70 ton capacity 1750mm swing Dwsdpszwmw Ujfx Adgeb 9000mm between centres Twin saddle Hydrostatic bed 1700mm diameter 8-jaw chuck Siemens Sinumerik 840 DSL controls Date of manufacture: 2013 Serial No. 3432 Swarf conveyor Safety enclosure Quantity of tooling Euro cold twin fan chiller

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection Dodjqv Iw Tjpfx Adgswb - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 Dsdsk Egrpjpfx Adgowb spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2 / 4,4 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1.800 x 700 x 1.500 mm NARDINI MS 175E â?? Robust Lead and Feed Spindle Lathe A solid and proven conventional lathe for workshops, maintenance, mechanical engineering, and demanding machining tasks. Djdpszlkwbefx Adgewb The machine impresses with its robust construction, intuitive operation, and versatile applications. It is ideal for turning, thread cutting, face and longitudinal turning, as well as for machining a wide variety of workpieces. Advantages of the NARDINI MS 175E: â? Robust, durable machine construction â? Proven conventional technologyâ??ideal for workshops and training â? Lead and feed spindles for versatile machining capabilities â? Wide speed range â? Feed and thread tables for quick and convenient setup â? Extensive options for metric and other thread types â? Well-organized control panel with clearly arranged switches and adjustment controls â? Powerful and precise machining thanks to the machineâ??s sturdy construction â? Solid machine bed for excellent stability and low-vibration operation â? Protective cover over the spindle area for additional operator safety â? Ideal for one-off production, repairs, maintenance, and small-batch production â? A machine for users who value mechanical, reliable technology over unnecessary complexity Equipment: - 3-jaw lathe chuck - Various jaws - Lathe chuck guard - Collet chuck adapter - Various collets - Multifix tool holders - Multifix adapters - Vibration-damping feet

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Dwedezaf Hnspfx Adgeb Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 Dwsdpfxozzlg Aj Adgob - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: Dwjdszl E T Dspfx Adgsb - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: used, Year of construction: 1975, total length: 4,400 mm, total width: 1,450 mm, total height: 1,700 mm, Empty weight: 4.000 kg Dwedpoxixh Nofx Adgsb - Year: 1975 - Documentation available: Yes - CE certificate present: No - Serial number: 1677 - Drive system: Conventional - Centre height [mm]: 230 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 7.1 - Max. spindle speed [rpm]: 1400 - Options: Quick-change tool post, Three-jaw chuck, Travelling steady, Fixed steady - Transport dimensions: 4400mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2013, turning diameter 360 mm turning length 1000 mm swing diameter over bed slide 215 mm reus 30 - 3000 U/min Dedszfqi Rspfx Adgswb spindle bore 38 mm feed längs 0,043 - 0,653 m/min total power requirement 3,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: used, Year of construction: 2023, control SIEMENS SINUMERIK 828D greates pass round over bed 650 mm swing diameter over slide rest 540 mm max. turning diameter 395 mm bar material dia. 67 mm x-axis 235 mm y-axis 105(±52.5) mm z-axis 580 mm Feed ( x / y / z) 24/10/24 mm/min spindle tunring speed 4.500 U/min torque 169,8/89,2 Nm spindle nose A2-6 spindle passage 76 mm spindle bearing diameter 110 mm Dsdozzrhyepfx Adgewb drive capacity - main spindle 20/10,5 kW spindle tunring speed 6.000 U/min torque 45 Nm spindle nose A2-5 spindle passage 45 mm spindle bearing diameter 90 mm Drive power - sub spindle 7,8 kW number of tool places 12 Pos. shank size for square tool 25 x 25 mm Shank diameter for boring bars 40 mm tool taper BMT 55 Live tool torque (Max./Cont.) 44,4/23,4 Nm total power requirement 49 kVA Overall size ca. 4.130 x 1.752 x 2.085 mm weight of the machine ca. 4.200 kg In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min Dodpjtycpasfx Adgswb feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: used, total width: 1,700 mm, total length: 3,800 mm, total height: 2,000 mm, Empty weight: 6.000 kg CNC Internal grinder, converted from a CNC lathe - Documentation available: Yes - CE certificate present: No - Serial number: UC-1871 - Drive system: CNC - Power [kW]: 15.0 - Centre height [mm]: 115 - Swing over bed [mm]: 380 - Distance between centres [mm]: 635 - Spindle bore [mm]: 75 - Max. spindle speed [rpm]: 3500 - Options: Removable bed - Swing over removable bed [mm]: 520 - Transport dimensions: 3800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dwsdpfx Adew A I Uhjgjb Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual Dwedpfx Adexaamuegsb

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja connected load 18,5 kW Dwedszycrtjpfx Adgjb digital ja multifix ja weight of the machine ca. 4 t

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Dedezy N Syspfx Adgewb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, turning length 1000 mm turning diameter 330 mm turning dia. over face-slide 198 mm turning dia. in gap 476 mm spindle bore 38.0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper DIN ISO 702-2 Nr. 4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1.5 kW weight of the machine ca. ca. 610 kg. range L-W-H 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped with ribs - The speed and feed rate adjustment is simple in design, smooth-operating, and . can be shifted precisely Scope of delivery: Dwjdszlukxjpfx Adgsb - 3-jaw chuck - MULTI-FIX tool holder with insert - Safety guard for the 3-jaw chuck - Slip clutch - Coolant system - Foot pedal with brake function, CE-compliant - Rear splash guard - Machine light - Base frame

Condition: used, total width: 800 mm, total length: 2,300 mm, Meuser conventional lathe with a 3-jaw chuck, tool holder, and fixed tailstock. Robust German lathe for the workshop. Technical specifications: Dwsdpfx Ajzzpbwodgeb - Chuck: 3-jaw - Bed dimensions: approx. 160 x 74 cm - Machine dimensions: approx. 230 x 80 cm - Accessories: tool holder, fixed tailstock The machine is sold in its current condition (used, from a bankruptcy sale, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer must provide their own tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0624, turning diameter: 20 mm, rotational speed (max.): 6,000 rpm, controller model: FANUC Series 18i-T, spindle stroke: 205 mm, number of axes: 7, CNC Swiss-type lathe with seven machining axes! Dwedpfxow Uilqj Adgeb TECHNICAL DETAILS Machining Data Turning diameter: 20 mm Spindle head stroke: 205 mm Spindle speed: max. 6,000 rpm Number of axes: 7 Bar length: 3,200 mm Control: FANUC Series 18i-T EQUIPMENT Main spindle with 4 axes (X/Z/Y/C) Sub-spindle with 3 axes (X/Z/C) 14 tool stations 5 driven tool positions Small parts extraction device Bar feeder: FMB Type Turbo 3-26 Operator terminal Coolant system: Oil

Condition: used, Used 2-meter lathe by Cazeneuve Dwedezgcltjpfx Adgob Type: HB 500 Swinging diameter over bed: 460 mm Turning length: 2000 mm Digital readout, 2 axes

Condition: used, Year of construction: 1980, serial number 36884 centre distance 1000 mm 520 mm Dwedpfx Adszmixtogob weight of the machine ca. 2 t