Used Slideway Grinding Machine for sale (65,010)

Condition: used, Year of construction: 1988, Year 1988 Dkjdpfexmk Euox Ag Dsk In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t Dsdpjxq R Haefx Ag Dskk dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Dedpfx Aexc Nypsg Dekk Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m Dsdsxq Hkuopfx Ag Dokk In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Djdpfexp R D Nex Ag Dokk Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Djdpfxjxuv Ude Ag Dekk The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 Dkjdpfxewwl N Se Ag Djk grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Dkjdpfex H Andjx Ag Dok Subject to prior sale!

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dkedpfx Ajx Ik Tksg Djk Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dodpjxzuyrofx Ag Dskk Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t The machine is untested and is being sold for spare parts only! Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dodpfx Ajx I Sigsg Dokk Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 Dksdoynbi Ispfx Ag Djk 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Dedpfx Agoxc Nyvj Djkk Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1988, JUNG JF 415 E Machine type: Surface grinding machine Year of manufacture: 1988 Working area Grinding length (X): approx. 400 mm Grinding width (Y): approx. 150 mm Max. workpiece height: approx. 240–400 mm Magnetic chuck: 400 × 150 mm Grinding spindle / Tool Grinding wheel: approx. Ø 225 mm, width 16–25 mm Spindle power: approx. 2 – 4 kW Speed: up to approx. 4,500 rpm Feeds / Movements Longitudinal feed: approx. 1 – 20 m/min (hydraulic) Dkedpfxsyx S R So Ag Dok Cross travel: approx. 150 mm Infeed: automatic Connection / Power Mains connection: 380–400 V / 50 Hz Total power: approx. 4–4.5 kVA Dimensions / Weight Machine weight: approx. 1,300 – 2,250 kg Dimensions: approx. 2,200–2,500 × 1,300–2,100 × 1,500–1,900 mm

Condition: used, Technical Data Manufacturer: Technica Model: 5100 Dkjdjyw Rr Eepfx Ag Dek Design: Centre grinding machine with vertical construction Workpiece holding: Between centres with tailstock and guide Grinding spindle: High-speed grinding spindle Equipment: Various grinding wheels and live centres included Maximum workpiece length: 1100 mm Minimum workpiece length: 50 mm Maximum workpiece diameter: 125 mm Minimum workpiece diameter: 8 mm Centre height above guide: 145 mm Centre height above carriage: 65 mm Centre hole taper angle: 60° Maximum centre hole diameter: 50 mm Minimum core hole diameter: 2 mm Weight: 460 kg Dimensions: 850 x 750 x 1850 mm Condition: Used, good No guarantee is given for the correctness, completeness, and up-to-dateness of the information provided.

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: Dkodpeym Tuaofx Ag Dok grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC angle approach cylindrical grinder Dodpsym Tcwofx Ag Djkk Technical Details: diameter 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2000, Lot consists of: (1) Crankshaft machining unit Djdpfx Ajym Tbgjg Dekk Technical details: Crankshaft machining unit, 400V 50Hz 12.5kVA 18A, CNC SIEMENS SINUMERIK 840D

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC grinder Dedpfsym S S Dsx Ag Dekk Technical details: center height 180 mm, working range Ø 200 x 600 mm, one grinding slide / travel 150 mm, CNC SIEMENS SINUMERIK 840D, dimensions (LxWxH) approx. 3 x 2 x 2 m, weight approx. 6.5 t.

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC main bearing grinder Dkjdpfx Ajym Syhjg Dsk Technical Details: Crankshaft length 630 mm x diameter 180 mm, 2 grinding spindles (grinding wheel diameter 400 mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC con-rod bearing grinder. Technical details: crankshaft length 600 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16t. Djdpfx Asym Spieg Dskk

Condition: like new (used), Machine come with lot of additional equipement. Dedpfx Agshvr Hbs Dokk

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Dsdpfxou Hiq Rj Ag Dskk Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: good (used), Machine is in good working condition. Dksdpfxjwu Exno Ag Dek

Condition: good (used), Year of construction: 2000, Machine is in good working condition. Dkodpfx Asrh Ipasg Dok Magnet 600 mm