Used Shoe for sale (372)

Year of construction: 2016, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at telephone number). Stabau roller track S1-RGSCH 100 / 8, load capacity / year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 710 kg (complete set) Overall length: 3,000 mm Overall width: 500 mm Please see the attached images for precise dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (telephone number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Errors and prior sales excepted! Internal ID: 160520 = Further information = Year of manufacture: 2016 Rcjdsznryispfx Akieh New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Stabau roller slides S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center: 1,500 mm Weight: 689 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please refer to the attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. Rcodpfxsznrvds Akish We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 141072 = Further information = Year of manufacture: 2014 New: No Unladen weight: 689 kg Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Stabau roller rails S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center: 1,500 mm Weight: 665 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please see attached images for precise pocket dimensions. Rsdpfx Asznruyekisch We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 140204 = Further information = Year of manufacture: 2014 New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, total height: 67 mm, total length: 1,800 mm, total width: 180 mm, Length: 1.72 m + 8 cm Rcjdpfoz S Rhxsx Akijh Width: 18 cm Depth at the front: 6 mm Depth at the rear: 6 cm + 7 mm

Condition: used, fork carriage width: 150 mm, fork length: 2,000 mm, fork width: 90 mm, fork thickness: 67 mm, Length: 2m + 9cm Width: 15cm Width at the front (at the tip): 9cm Depth at the front: 2.2cm Rcodsz S Rh Eepfx Akioh Depth at the rear: 4.5cm + 8mm

Condition: used, functionality: fully functional, This is a drying and disinfection system for boots and shoes manufactured by PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovative solution for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. Disinfection is carried out safely using ozone, thus eliminating the need for chemicals. Simultaneous drying is achieved through warm air, ensuring a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically designed for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's recommended retail price: €2,721 net = €3,238 gross Rodpozxn Rfofx Akisch Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2892/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would like to request advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is subject exclusively to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, overall weight: 32,500 kg, Year of construction: 1994, operating hours: 7,841 h, machine/vehicle number: 86G01581, Absolutely excellent loader. 100% original operating hours. Rsdpfxo Af Aa Sj Akisch CAT 3306 engine. Transmission and hydraulics are in good working order. Undercarriage and track shoes are in top condition. Located in Belgium for inspection.

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sanding machine with a 1100 mm sanding width. 1st unit: Rubber-coated roller 2nd unit: Electronic oscillating shoe, 3-stage motor with selectable left and right rotation 3rd unit: Electronic oscillating shoe with stepless belt speed adjustment Rcsdpfx Akeghymheish 4th unit: Air blast nozzle Feed rate: 2 stages Vacuum table

Condition: used, functionality: fully functional, This is a boot and shoe drying and disinfection system from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is an innovation for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. The disinfection is carried out safely using ozone, thus consuming no chemicals. Simultaneous drying is achieved using warm air, which ensures a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's list price: €2,721 net = €3,238 gross Rcsdpfx Akozxn Sisijh Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection and expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2893/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: good (used), axle configuration: 2 axles, first registration: 11/2018, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,310 mm, total length: 9,420 mm, total width: 2,600 mm, total height: 3,860 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Tare weight: 6770 kg, Gross vehicle weight: 18000 kg, Type of chassis: Full chassis, ABS, EBS, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Supra 850 u, Refrigeration unit: Diesel/electric, ATP status: ., Wall thickness: 35 mm, Type of cooling: Cooling, Day/night cooling: Day/night cooling, Axle type: VALX, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 240x256, Battery for ramp = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Powertrain Fuel type: Diesel Transmission Rcsdpez Eyrfjfx Akijh Transmission: Manual Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 10 mm; Tire tread right: 13 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 9 mm Weights Unladen weight: 6,770 kg Payload: 11,230 kg GVW: 18,000 kg Functional Tail lift: Bar cargolift, Rear door, 2000 kg Height of loading platform: 143 cm Refrigeration unit: Diesel and electric Wall thickness: 35 mm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: €677 per month (default, 60 months); Inquire for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1000466, For sale is a professional direct injection molding machine from leading manufacturer DESMA, model S712. This machine is ideally suited for the efficient series production of footwear with directly molded soles (direct injection molding). Areas of application & uses: Ideal for TPU - 200T clamping force Footwear industry: Production of safety shoes, work shoes, hiking boots, as well as leisure and shaft boots. Materials: Processing of polyurethane (PU), TPU, or PU combinations for sole production. Process: Direct injection molding of the sole material onto the upper. Rsdpfx Akoz H Ibwjijch Equipment & features: Type / design: DESMA S712 rotary table machine / carousel machine with multiple stations. Molding head: Precision mixing head for accurate material metering and clean mixing. Control: Ergonomic control panel for central control of temperature, injection volume, and cycle times. Hydraulics & pneumatics: Robust clamping units for even pressure and burr-free sole edges. Safety: Integrated safety guards and light curtains according to industrial standards. Technical data (standard configuration): Manufacturer: DESMA Schuhmaschinen GmbH Model: S712 2003 expansion to 8 stations Application: Direct injection molding / sole injection molding Processable media: PU systems (polyol / isocyanate) Condition: Used, from current/former production

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Rsdpfjz Ngiysx Akiech

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. Rcjdj Af Tyzspfx Akieh ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding for coated surfaces. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with a combination unit and electronic articulated pressure beam, with edge segments that can be switched on and off. Segment width of the pressure beam: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed can be infinitely adjusted via a frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimensions 1360 x 1900 mm. Rsdpfx Akezqvmreiech 3 rubber-coated pressure rollers. Infeed roller table and fold-down outlet table. Preparation for vacuum blower. The belt is perforated, and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure beam engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Rcodj Aflwyjpfx Akijh

Condition: excellent (used), Catalog number 8036 Rcsdpfs Af Uubex Akieh TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: ready for operation (used), functionality: fully functional, working width 950 mm Rjdpozz Nkrefx Akisch calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit Rsdpfxsza Ak Re Akioch 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: like new (used), Year of construction: 1983, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 125 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 3,000 rpm, total height: 4,000 mm, total length: 9,000 mm, total width: 6,000 mm, table length: 1,450 mm, table width: 1,250 mm, spindle mount: MK 5, type of input current: AC, workpiece weight (max.): 12,000 kg, drill spindle length: 600 mm, spindle stroke: 600 mm, mount diameter: 50 mm, control cabinet width: 600 mm, control cabinet length: 4,000 mm, control cabinet height: 2,000 mm, overall weight: 24,350 kg, year of last overhaul: 2017, Equipment: crane, rotational speed infinitely variable, Coolant system with 4 nozzles and center spindle Protective door at the operator station * The machine does not require a foundation but is installed on a specially designed polymer bed, standing 600 mm high. * Additional feature: A CNC-controlled rotary table is integrated into the boring quill, allowing for the machining of contours up to a diameter of 600 mm. The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced, and the control system was upgraded to Siemens 840 D. In the mechanical area, for example, the roller bearing shoes and the ball screw in the Z-axis were replaced, as well as the spindle head, including its guide and flyer chains for the counterweights, which were inspected and/or renewed. In addition, HCR installed a machine enclosure (open at the top), which was integrated into the safety concept, including operating mode 4, by Scharmann. Rsdpfe Agd Ahex Akioch In 2017, the CNC rotary table, the differential gear, and the boring spindle unit were dismantled and overhauled at the Scharmann factory (new bearings, seals, and gears).

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) Rcedpfx Aozuhfhskish • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control Redezp H Tyepfx Akiech NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Rjdoy Sam Uopfx Akiech Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: excellent (used), functionality: fully functional, Working width: 900mm Steel calibrating roller Rcsdpfx Aszxp Npjkioh Combination unit with a rubber roller Motor power: 11kW Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Electric table adjustment Star/Delta start-up Power supply: 380V

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm Rjdpjz Tflnjfx Akisch - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture. Rodpfx Aoy Uahwokioch