Used Sheetfed Offset Press for sale (27,941)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Codpfxsx A U Ncs Abbohf Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 2000, total length: 3,700 mm, total width: 2,000 mm, total height: 2,750 mm, Weight: 8.500 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 752200069 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-80 - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 120 - Max. working width [mm]: 3000 - Column gap [mm]: 2600 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 80 - Control type: Cybelec DNC-80 - Control: CNC Codpfx Ajw Igwqobbjhf - Transport dimensions: 3700mm x 2000mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Specac Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller Cjdsx A T T Hspfx Abbohf - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Film-Making Set - Complete accessory case - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1 x 16-page web offset printing press Manufacturer: KBA Model: C16 Year of manufacture: 2011 Cut-off length: 620 Max. web width: 1000 mm Chodpfjx Dml Ejx Abbof Web direction: right to left General description: 1 x KBA splicer 4 x KBA printing units with automatic plate changing system 1 x web exit unit 1 x Megtec DualDry III 10.8-1066 dryer (without afterburner) natural gas (exhaust air volume = 4,176 Nm³) 1 x chill roller stand (4 rollers) 1 x folder support with WEKO silicon applicator 1 x KBA superstructure (6 longitudinal slitters, 1 former) 1 x KBA folding unit (with double parallel) 1 x inline densitometer control system GMI ColorQuick 1 x Planatol 9NET gluing system 1 x cooling center Axima / Cofely i.Cool Temp.Center 1 x postpress with stick former / palletizer and optional cutting line

Condition: used, functionality: fully functional, Year of construction: 2007, Specification Tonnage 100 Tons Bending Length 3000mm Year of Manufacture 2007 Complete with: Cybelec DNC 60 CNC Control Chsdjxx T Naopfx Abbef Lasersafe guarding Top Tool 88 Degree Standard Gooseneck Bottom Tool 4 way Multi Vee Die

Condition: good (used), Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete Cjdpfxegxnkko Abbjhf -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Year of construction: 1999, condition: good (used), Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 with two-hand operation. UVV until 2023. Codpjiduvcefx Abbohf

Condition: used, Year of construction: 2019, total length: 1,070 mm, total width: 1,940 mm, total height: 2,020 mm, Weight: 2.000 kg Price: On request - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 1500 - Column gap [mm]: 1550 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 150 - Transport dimensions: 1070mm x 1940mm x 2020mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Chedpfx Aoxcxqqebbsf

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Csdpfx Absxfg A Hebshf Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, Used Darley CNC press brake Type EHP LS 130 31 25 CL Capacity 3100 x 130 tons Chsdpfx Aoxzgixjbbef Delem DA 65W CNC control Y1, Y2, X and R axes CNC controlled CNC crowning Hydraulic Wila NS upper and lower clamping

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Chedpfx Ajxwk E Aobbof Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: good (used), Press Brake AMADA Brand Type HFT 80/25 Capacity 2500 x 80T Distance between uprights 1800mm Dimensions 3500 x 1500 x 2100 Weight 6.5T Equipped with new and used tools Cedpfjwivddox Abbohf

Year of construction: 2000, condition: good (used), 5.pcs in stock Price Applies to 1.pcs. Toggle press Fabr.SCHMIDT Druckl.3 KN. Chsdpfx Abjiduvgsbef

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 2439 - Drive system: Conventional Chsdpfxjxr Dnms Abbsf - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Cjdpfx Ajuyh Twebbshf

Condition: good (used), functionality: fully functional, Year of construction: 1999, Neat used press brake from Safan Type CNCL K 110 3100 Safan TS1 control Capacity 3100 x 110 ton Y1, Y2 and X axis CNC controlled Chsdpfxoxzff So Abbsf CNC Bombering Set of tools included

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN Chsdpjq Awh Refx Abbef tracking travel 13 mm safety distance 176 mm

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ with vacuum buffer tank Movable on castors Tilting press table Chjdpfxex Dayis Abbef Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Condition: used, functionality: unexamined, input voltage: 220 V, Eccentric press TT, 220V, with lighting and adjustable stroke Chodpfx Aex Dkzdjbbef

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm Chsdpfx Aevut N Asbbjf ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm Chsdpsx Dmq Ijfx Abbof piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1964, pressure 7 t weight 0,9 t Csdpfx Abjqy Rn Tjbohf 1417

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. Chodsx Dmqhopfx Abbsf It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW Chjdpfx Aexzk S Djbbjf 200 mm inward space

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Chodpox Dmp Rofx Abbof Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s