Used Shark for sale (85)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Djdpfx Agsfg E H Ie Deur Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm Djdpjfm T Hbefx Ag Dsur band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Dusdpfx Ajfg E Hzjg Dsr Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Max. sheet thickness (S235): up to 12.0 mm Max. sheet length: 3200 mm Cutting angle: 2° Strokes per minute: 6–20 Back gauge travel: 600 mm Motor power: 15 kW Length: 4000 mm Width: 2100 mm Height: 2100 mm Weight: 9500 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Dujdpsych Imsfx Ag Dsr Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: new, Year of construction: 2026, Hydraulic guillotine shears are advanced machines designed for precise cutting of metal sheets of various thicknesses and hardness. Thanks to the hydraulic drive, they provide high pressing force, enabling efficient processing of even the most demanding materials. Their solid construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable in industrial plants and workshops specializing in metal processing. Technical specifications Max. sheet thickness (S235): up to 8.0 mm Max. sheet length: 3200 mm Cutting angle: 1.5° Strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 6400 kg Equipment: Rear gauge driven by electric motor (on ball screws) Hydraulic sheet clamps along the entire cutting length Dsdpjych Iasfx Ag Dsur Adjustable blade gap Ball guides on the table for sheets Work area lighting Front supports Mobile foot controller The rear ramp is equipped with ball guides, ensuring smooth and precise movement of cut pieces. This prevents any material fragments from remaining on the machine, improving efficiency and safety. Using steel tubes in the hydraulic system instead of flexible rubber hoses significantly increases system tightness and minimizes the risk of leaks in the future. Thanks to their rigidity and resistance to mechanical damage, steel tubes provide durability and reliability of hydraulic connections. With the mobile controller and the control unit mounted on a movable arm, the operator has complete freedom of movement throughout the machine’s working area. Additional LED lighting and a laser indicator provide excellent visibility of the workpieces, enhancing precision and comfort under any working conditions.

Condition: new, functionality: fully functional, mileage: 1 km, power: 170 kW (231.14 HP), fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 1,400 kg, overall weight: 9,800 kg, tire size: 405/70 r20, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space length: 2,550 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, all wheel drive, crane, cruise control, differential lock, hydraulics, navigation system, onboard computer, soot filter, trailer coupling, Your advantages if you read on: Available at short notice, new and inexpensive, as a special model This all-terrain Unimog 4023 takes you to any job site and, with its optimally dimensioned loading crane, is a tireless helper on board that actively supports you in your lifting and assembly work and brings you forward economically. Its particularly long service life also makes the Unimog very stable in value and therefore very economical for you. The crane has 4 extensions and a cable winch to facilitate and support assembly work. Please find attached the lifting capacity diagram for this crane. The support at the rear remains in the contour of the vehicle so that you can set up and work in a very space-saving manner. Where trucks no longer have room, the Unimog still has a chance. Another major advantage is the Scharmüller carriage in conjunction with the cross member and struts. Its use increases the towing capacity and makes a drawbar load for central axle trailers possible in the first place! This makes the Kranimog a short and multifunctional towing vehicle that can also tow particularly long trailers. trailers. Height-adjustable trailer coupling Another unique selling point of this unique overall concept is the height-adjustable trailer coupling. height-adjustable trailer coupling with which you can tow a wide variety of trailers. The following trailer loads apply: Maximum towing capacity for turntable trailers: 14,700 kg Maximum towing capacity for center-axle trailers: 13,000kg Maximum drawbar load: 1,000kg Maximum trailer load for braked car trailers: 3,500kg All values are explicitly approved by the vehicle manufacturer for truck registration and are entered in the vehicle documents for your Unimog. Flatbed: Clear length inside: approx. 2550 mm Clear width so that 2 pallets can be loaded crosswise and visually matches the crane width. Wooden floor Side wall aluminum height approx. 400mm End wall aluminum height approx. 600mm Corner stanchions : None! perfect for unloading Drop sides detachable We are here for you; please arrange a callback and we will check whether we can help you. Unimog equipment: (excerpts!) RT2 Dunlop SP9 405/70 R20 on 11x20 drop center rims B1V Holding brake on front axle B5B Trailer brake, 2 lines D6F Air conditioning DE4 Electric windows DF3 Swivel seat with air suspension and seat heating for driver E2J Circuit breakers E40 ABS trailer socket 24V E41 Trailer socket 24V, 12-pin E83 Acoustic differential lock signal EF3 Reversing chamber EM5 Monitor for chamber F3W Driver's cab tilting device Dedpfx Askqfqueg Deur F64 Tilt fittings for cab G22 Off-road group G48 EAS G50 Transmission oil cooler JV5 Pre-installation radio, radio DAB with navigation function - installation of short DAB Shark antenna K7A Tailpipe upwards L32 Stone guard for blinker lights LH6 Stone guard for rear lights N16 Gearbox PTO fast Q32 Cross member for increased trailer load TF7 Weight variant 9.8T (4.6/5.5) - Promotional price - offer only while stocks last and subject to change

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg The machine is in excellent condition and will be fully inspected and serviced. Duodpfsyyuxnsx Ag Dor

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Ethernet Module enables software connection (auto reporting and remote maintenance) Dedpst Dkrcsfx Ag Dsur Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Dujdpfowlaxksx Ag Dsr Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm Dodpfx Aowh U Dmsg Dsur • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____